From 7595f538562437fa6d13ede5be7a5a4b5d582c6b Mon Sep 17 00:00:00 2001
From: yfuku <30647434+yfuku@users.noreply.github.com>
Date: Tue, 10 Nov 2020 14:07:12 +0900
Subject: refactor SPLIT_KEYBOARD, OLED_DRIVER_ENABLE (#10405)
---
keyboards/claw44/claw44.c | 9 -
keyboards/claw44/config.h | 4 -
keyboards/claw44/i2c.c | 162 --------
keyboards/claw44/i2c.h | 46 ---
keyboards/claw44/keymaps/default/config.h | 12 -
keyboards/claw44/keymaps/default/keymap.c | 199 ++-------
keyboards/claw44/keymaps/oled/config.h | 24 ++
keyboards/claw44/keymaps/oled/keymap.c | 137 +++++++
keyboards/claw44/keymaps/oled/rules.mk | 1 +
keyboards/claw44/keymaps/yfuku/config.h | 36 --
keyboards/claw44/keymaps/yfuku/keymap.c | 221 ----------
keyboards/claw44/lib/glcdfont.c | 13 +-
keyboards/claw44/lib/host_led_state_reader.c | 15 -
keyboards/claw44/lib/keylogger.c | 45 --
keyboards/claw44/lib/layer_state_reader.c | 35 --
keyboards/claw44/lib/logo_reader.c | 11 -
keyboards/claw44/lib/mode_icon_reader.c | 15 -
keyboards/claw44/lib/rgb_state_reader.c | 15 -
keyboards/claw44/lib/timelogger.c | 16 -
keyboards/claw44/rev1/config.h | 23 +-
keyboards/claw44/rev1/matrix.c | 358 ----------------
keyboards/claw44/rev1/rev1.c | 9 +-
keyboards/claw44/rev1/rev1.h | 74 ++--
keyboards/claw44/rev1/rules.mk | 16 +-
keyboards/claw44/rev1/serial_config.h | 4 -
keyboards/claw44/rev1/split_scomm.c | 91 -----
keyboards/claw44/rev1/split_scomm.h | 24 --
keyboards/claw44/rev1/split_util.c | 70 ----
keyboards/claw44/rev1/split_util.h | 19 -
keyboards/claw44/rules.mk | 9 -
keyboards/claw44/serial.c | 589 ---------------------------
keyboards/claw44/serial.h | 84 ----
keyboards/claw44/ssd1306.c | 345 ----------------
keyboards/claw44/ssd1306.h | 90 ----
34 files changed, 259 insertions(+), 2562 deletions(-)
delete mode 100644 keyboards/claw44/i2c.c
delete mode 100644 keyboards/claw44/i2c.h
create mode 100644 keyboards/claw44/keymaps/oled/config.h
create mode 100644 keyboards/claw44/keymaps/oled/keymap.c
create mode 100644 keyboards/claw44/keymaps/oled/rules.mk
delete mode 100644 keyboards/claw44/keymaps/yfuku/config.h
delete mode 100644 keyboards/claw44/keymaps/yfuku/keymap.c
delete mode 100644 keyboards/claw44/lib/host_led_state_reader.c
delete mode 100644 keyboards/claw44/lib/keylogger.c
delete mode 100644 keyboards/claw44/lib/layer_state_reader.c
delete mode 100644 keyboards/claw44/lib/logo_reader.c
delete mode 100644 keyboards/claw44/lib/mode_icon_reader.c
delete mode 100644 keyboards/claw44/lib/rgb_state_reader.c
delete mode 100644 keyboards/claw44/lib/timelogger.c
delete mode 100644 keyboards/claw44/rev1/matrix.c
delete mode 100644 keyboards/claw44/rev1/serial_config.h
delete mode 100644 keyboards/claw44/rev1/split_scomm.c
delete mode 100644 keyboards/claw44/rev1/split_scomm.h
delete mode 100644 keyboards/claw44/rev1/split_util.c
delete mode 100644 keyboards/claw44/rev1/split_util.h
delete mode 100644 keyboards/claw44/serial.c
delete mode 100644 keyboards/claw44/serial.h
delete mode 100644 keyboards/claw44/ssd1306.c
delete mode 100644 keyboards/claw44/ssd1306.h
(limited to 'keyboards/claw44')
diff --git a/keyboards/claw44/claw44.c b/keyboards/claw44/claw44.c
index f564fb623b..d87103065c 100644
--- a/keyboards/claw44/claw44.c
+++ b/keyboards/claw44/claw44.c
@@ -1,10 +1 @@
#include "claw44.h"
-#include "ssd1306.h"
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-#ifdef SSD1306OLED
- return process_record_gfx(keycode,record) && process_record_user(keycode, record);
-#else
- return process_record_user(keycode, record);
-#endif
-}
diff --git a/keyboards/claw44/config.h b/keyboards/claw44/config.h
index fb1cdf3962..0bd74ff833 100644
--- a/keyboards/claw44/config.h
+++ b/keyboards/claw44/config.h
@@ -19,10 +19,6 @@ along with this program. If not, see .
#pragma once
#include "config_common.h"
-#include
-
-#define USE_I2C
-#define USE_SERIAL
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
diff --git a/keyboards/claw44/i2c.c b/keyboards/claw44/i2c.c
deleted file mode 100644
index 4bee5c6398..0000000000
--- a/keyboards/claw44/i2c.c
+++ /dev/null
@@ -1,162 +0,0 @@
-#include
-#include
-#include
-#include
-#include
-#include
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
- uint16_t lim = 0;
- while(!(TWCR & (1<10.
- // Check datasheets for more info.
- TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-// 1 => error
-uint8_t i2c_master_start(uint8_t address) {
- TWCR = (1< slave ACK
-// 1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
- TWDR = data;
- TWCR = (1<= SLAVE_BUFFER_SIZE ) {
- ack = 0;
- slave_buffer_pos = 0;
- }
- slave_has_register_set = true;
- } else {
- i2c_slave_buffer[slave_buffer_pos] = TWDR;
- BUFFER_POS_INC();
- }
- break;
-
- case TW_ST_SLA_ACK:
- case TW_ST_DATA_ACK:
- // master has addressed this device as a slave transmitter and is
- // requesting data.
- TWDR = i2c_slave_buffer[slave_buffer_pos];
- BUFFER_POS_INC();
- break;
-
- case TW_BUS_ERROR: // something went wrong, reset twi state
- TWCR = 0;
- default:
- break;
- }
- // Reset everything, so we are ready for the next TWI interrupt
- TWCR |= (1<
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency 400kHz
-#define SCL_CLOCK 400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/claw44/keymaps/default/config.h b/keyboards/claw44/keymaps/default/config.h
index eff6ad3c7b..d2ea02545b 100644
--- a/keyboards/claw44/keymaps/default/config.h
+++ b/keyboards/claw44/keymaps/default/config.h
@@ -20,16 +20,4 @@ along with this program. If not, see .
#pragma once
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-
#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define TAPPING_TERM 200
diff --git a/keyboards/claw44/keymaps/default/keymap.c b/keyboards/claw44/keymaps/default/keymap.c
index 088087c773..65dbd67d98 100644
--- a/keyboards/claw44/keymaps/default/keymap.c
+++ b/keyboards/claw44/keymaps/default/keymap.c
@@ -1,168 +1,59 @@
#include QMK_KEYBOARD_H
-#ifdef PROTOCOL_LUFA
- #include "lufa.h"
- #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
-
-
-extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
-enum custom_keycodes {
- QWERTY = SAFE_RANGE,
- LOWER,
- RAISE
-};
-
-enum macro_keycodes {
- KC_SAMPLEMACRO,
+enum layer_number {
+ _QWERTY = 0,
+ _RAISE,
+ _LOWER,
};
#define KC_ KC_TRNS
#define KC_RST RESET
-#define KC_L_SPC LT(_LOWER, KC_SPC) // lower
-#define KC_R_ENT LT(_RAISE, KC_ENT) // raise
-#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win
-#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win
-#define KC_C_BS LCTL_T(KC_BSPC) // ctrl
-#define KC_A_DEL ALT_T(KC_DEL) // alt
+#define KC_L_SPC LT(_LOWER, KC_SPC) // lower
+#define KC_R_ENT LT(_RAISE, KC_ENT) // raise
+#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win
+#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win
+#define KC_C_BS LCTL_T(KC_BSPC) // ctrl
+#define KC_A_DEL ALT_T(KC_DEL) // alt
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- [_QWERTY] = LAYOUT( \
- //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------.
- KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS,
- //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------|
- KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT,
- //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------|
- KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,
- //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------'
- KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL
- // `----------+--------+---------+--------' `--------+---------+--------+---------'
- ),
-
- // \ ^ ! & | @ = + * % -
- // ( # $ " ' ~ ← ↓ ↑ → ` )
- // { [ ] }
-
- [_RAISE] = LAYOUT( \
- //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
- _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______,
- //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------'
- _______, _______, _______, _______, _______, _______, _______, RESET
- // `--------+--------+--------+--------' `--------+--------+--------+--------'
- ),
-
- [_LOWER] = LAYOUT( \
- //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
- KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______,
- //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
- KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______,
- //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------'
- RESET , _______, _______, _______, _______, _______, _______, _______
- // `--------+--------+--------+--------' `--------+--------+--------+--------'
- ),
+ [_QWERTY] = LAYOUT( \
+ //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------.
+ KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS,
+ //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------|
+ KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT,
+ //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------|
+ KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,
+ //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------'
+ KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL
+ // `----------+--------+---------+--------' `--------+---------+--------+---------'
+ ),
+
+ [_RAISE] = LAYOUT( \
+ //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
+ _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______,
+ //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------'
+ _______, _______, _______, _______, _______, _______, _______, RESET
+ // `--------+--------+--------+--------' `--------+--------+--------+--------'
+ ),
+
+ [_LOWER] = LAYOUT( \
+ //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
+ KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______,
+ //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------'
+ RESET , _______, _______, _______, _______, _______, _______, _______
+ // `--------+--------+--------+--------' `--------+--------+--------+--------'
+ ),
};
-
-void matrix_init_user(void) {
- //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
- #ifdef SSD1306OLED
- iota_gfx_init(!has_usb()); // turns on the display
- #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-// When add source files to SRC in rules.mk, you can use functions.
-const char *read_layer_state(void);
-const char *read_logo(void);
-void set_keylog(uint16_t keycode, keyrecord_t *record);
-const char *read_keylog(void);
-const char *read_keylogs(void);
-
-// const char *read_mode_icon(bool swap);
-// const char *read_host_led_state(void);
-// void set_timelog(void);
-// const char *read_timelog(void);
-
-void matrix_scan_user(void) {
- iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
- if (is_master) {
- // If you want to change the display of OLED, you need to change here
- matrix_write_ln(matrix, read_layer_state());
- matrix_write_ln(matrix, read_keylog());
- matrix_write_ln(matrix, read_keylogs());
- //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
- //matrix_write_ln(matrix, read_host_led_state());
- //matrix_write_ln(matrix, read_timelog());
- } else {
- matrix_write(matrix, read_logo());
- }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
- matrix_clear(&matrix);
- matrix_render_user(&matrix);
- matrix_update(&display, &matrix);
-}
-#endif//SSD1306OLED
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- if (record->event.pressed) {
-#ifdef SSD1306OLED
- set_keylog(keycode, record);
-#endif
- // set_timelog();
- }
-
- switch (keycode) {
- case QWERTY:
- if (record->event.pressed) {
- set_single_persistent_default_layer(_QWERTY);
- }
- return false;
- break;
- case LOWER:
- if (record->event.pressed) {
- layer_on(_LOWER);
- } else {
- layer_off(_LOWER);
- }
- return false;
- break;
- case RAISE:
- if (record->event.pressed) {
- layer_on(_RAISE);
- } else {
- layer_off(_RAISE);
- }
- return false;
- break;
- }
- return true;
-}
diff --git a/keyboards/claw44/keymaps/oled/config.h b/keyboards/claw44/keymaps/oled/config.h
new file mode 100644
index 0000000000..edde2c67ca
--- /dev/null
+++ b/keyboards/claw44/keymaps/oled/config.h
@@ -0,0 +1,24 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#define MASTER_LEFT
+#define OLED_FONT_H "keyboards/claw44/lib/glcdfont.c"
diff --git a/keyboards/claw44/keymaps/oled/keymap.c b/keyboards/claw44/keymaps/oled/keymap.c
new file mode 100644
index 0000000000..0d10c371a2
--- /dev/null
+++ b/keyboards/claw44/keymaps/oled/keymap.c
@@ -0,0 +1,137 @@
+#include QMK_KEYBOARD_H
+#include
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum layer_number {
+ _QWERTY = 0,
+ _RAISE,
+ _LOWER,
+};
+
+#define KC_ KC_TRNS
+#define KC_RST RESET
+#define KC_L_SPC LT(_LOWER, KC_SPC) // lower
+#define KC_R_ENT LT(_RAISE, KC_ENT) // raise
+#define KC_G_JA LGUI_T(KC_LANG1) // cmd or win
+#define KC_G_EN LGUI_T(KC_LANG2) // cmd or win
+#define KC_C_BS LCTL_T(KC_BSPC) // ctrl
+#define KC_A_DEL ALT_T(KC_DEL) // alt
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT( \
+ //,--------+--------+---------+--------+---------+--------. ,--------+---------+--------+---------+--------+--------.
+ KC_ESC , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_MINS,
+ //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------|
+ KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT,
+ //|--------+--------+---------+--------+---------+--------| |--------+---------+--------+---------+--------+--------|
+ KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,
+ //`--------+--------+---------+--------+---------+--------/ \--------+---------+--------+---------+--------+--------'
+ KC_A_DEL, KC_G_EN, KC_L_SPC, KC_C_BS, KC_C_BS, KC_R_ENT, KC_G_JA, KC_A_DEL
+ // `----------+--------+---------+--------' `--------+---------+--------+---------'
+ ),
+
+ [_RAISE] = LAYOUT( \
+ //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
+ _______, KC_BSLS, KC_CIRC, KC_EXLM, KC_AMPR, KC_PIPE, KC_AT , KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_LPRN, KC_HASH, KC_DLR , KC_DQT , KC_QUOT, KC_TILD, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_GRV , KC_RPRN,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ _______, _______, _______, _______, KC_LCBR, KC_LBRC, KC_RBRC, KC_RCBR, _______, _______, _______, _______,
+ //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------'
+ _______, _______, _______, _______, _______, _______, _______, RESET
+ // `--------+--------+--------+--------' `--------+--------+--------+--------'
+ ),
+
+ [_LOWER] = LAYOUT( \
+ //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
+ KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , _______, KC_EQL , KC_PLUS, KC_ASTR, KC_PERC, KC_MINS,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ _______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , _______,
+ //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
+ KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, KC_COMM, KC_DOT , KC_SLSH, _______,
+ //`--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------'
+ RESET , _______, _______, _______, _______, _______, _______, _______
+ // `--------+--------+--------+--------' `--------+--------+--------+--------'
+ ),
+};
+
+#ifdef OLED_DRIVER_ENABLE
+
+void render_layer_state(void) {
+ switch (get_highest_layer(layer_state)) {
+ case _QWERTY:
+ oled_write_ln_P(PSTR("Layer: Default"), false);
+ break;
+ case _RAISE:
+ oled_write_ln_P(PSTR("Layer: Raise"), false);
+ break;
+ case _LOWER:
+ oled_write_ln_P(PSTR("Layer: Lower"), false);
+ break;
+ default:
+ oled_write_ln_P(PSTR("Layer: Undefined"), false);
+ }
+}
+
+void render_logo(void) {
+ static const char PROGMEM logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0};
+ oled_write_P(logo, false);
+}
+
+char keylog_str[24] = {};
+char keylogs_str[21] = {};
+int keylogs_str_idx = 0;
+
+const char code_to_name[60] = {' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '};
+
+void set_keylog(uint16_t keycode, keyrecord_t *record) {
+ char name = ' ';
+ if (keycode < 60) {
+ name = code_to_name[keycode];
+ }
+
+ // update keylog
+ snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c", record->event.key.row, record->event.key.col, keycode, name);
+
+ // update keylogs
+ if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
+ keylogs_str_idx = 0;
+ for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
+ keylogs_str[i] = ' ';
+ }
+ }
+
+ keylogs_str[keylogs_str_idx] = name;
+ keylogs_str_idx++;
+}
+
+const char *read_keylog(void) { return keylog_str; }
+const char *read_keylogs(void) { return keylogs_str; }
+
+void oled_task_user(void) {
+ if (is_keyboard_master()) {
+ render_layer_state();
+ oled_write_ln(read_keylog(), false);
+ oled_write_ln(read_keylogs(), false);
+ } else {
+ render_logo();
+ }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (record->event.pressed) {
+ set_keylog(keycode, record);
+ }
+ return true;
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ if (!is_keyboard_master()) return OLED_ROTATION_180;
+ return rotation;
+}
+
+#endif
diff --git a/keyboards/claw44/keymaps/oled/rules.mk b/keyboards/claw44/keymaps/oled/rules.mk
new file mode 100644
index 0000000000..c582662134
--- /dev/null
+++ b/keyboards/claw44/keymaps/oled/rules.mk
@@ -0,0 +1 @@
+OLED_DRIVER_ENABLE = yes
diff --git a/keyboards/claw44/keymaps/yfuku/config.h b/keyboards/claw44/keymaps/yfuku/config.h
deleted file mode 100644
index 244ffa7096..0000000000
--- a/keyboards/claw44/keymaps/yfuku/config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define TAPPING_TERM 180
-#define IGNORE_MOD_TAP_INTERRUPT
diff --git a/keyboards/claw44/keymaps/yfuku/keymap.c b/keyboards/claw44/keymaps/yfuku/keymap.c
deleted file mode 100644
index 77d459b928..0000000000
--- a/keyboards/claw44/keymaps/yfuku/keymap.c
+++ /dev/null
@@ -1,221 +0,0 @@
-#include QMK_KEYBOARD_H
-#ifdef PROTOCOL_LUFA
- #include "lufa.h"
- #include "split_util.h"
-#endif
-#ifdef SSD1306OLED
- #include "ssd1306.h"
-#endif
-
-extern keymap_config_t keymap_config;
-
-extern uint8_t is_master;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-enum custom_keycodes {
- QWERTY = SAFE_RANGE,
- LOWER,
- RAISE
-};
-
-enum macro_keycodes {
- KC_SAMPLEMACRO,
-};
-
-// common
-#define KC_ KC_TRNS
-#define KC_XXXX KC_NO
-#define KC_RST RESET
-#define KC_VD KC__VOLDOWN
-#define KC_VU KC__VOLUP
-
-// layer
-#define KC_L_SPC LT(_LOWER, KC_SPC)
-#define KC_R_ENT LT(_RAISE, KC_ENT)
-
-// shift_t
-#define KC_S_TAB LSFT_T(KC_TAB)
-#define KC_S_ESC LSFT_T(KC_ESC)
-#define KC_S_JA LSFT_T(KC_LANG1)
-#define KC_S_EN LSFT_T(KC_LANG2)
-
-// cmd_t
-#define KC_M_F LCMD_T(KC_F)
-#define KC_M_D LCMD_T(KC_D)
-#define KC_M_J LCMD_T(KC_J)
-#define KC_M_K LCMD_T(KC_K)
-
-// ctl_t
-#define KC_C_S LCTL_T(KC_S)
-#define KC_C_L LCTL_T(KC_L)
-#define KC_C_BS LCTL_T(KC_BSPC)
-
-// alt_t
-#define KC_A_D ALT_T(KC_D)
-#define KC_A_K ALT_T(KC_K)
-#define KC_A_Z ALT_T(KC_Z)
-#define KC_A_SL ALT_T(KC_SLSH)
-#define KC_A_DEL ALT_T(KC_DEL)
-
-// cmd+shift_t
-#define KC_MS_Q SCMD_T(KC_Q)
-#define KC_MS_A SCMD_T(KC_A)
-#define KC_MS_S SCMD_T(KC_S)
-#define KC_MS_SC SCMD_T(KC_SCLN)
-#define KC_MS_ESC SCMD_T(KC_ESC)
-
-//
-#define KC_MR RCMD(KC_R)
-#define KC_MF RCMD(KC_F)
-#define KC_MW RCMD(KC_W)
-#define KC_MX RCMD(KC_X)
-#define KC_MC RCMD(KC_C)
-#define KC_MV RCMD(KC_V)
-#define KC_MTAB RCMD(KC_TAB)
-#define KC_MSF RCMD(RSFT(KC_F))
-#define KC_MSR RCMD(RSFT(KC_R))
-#define KC_MST RCMD(RSFT(KC_T))
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- // M_ = LCMD_T(
- // A_ = ALT_T(
- // C_ = LCTL_T(
- // MS_ = SMD_T(
- // R_ = LT(_RAISE
- // L_ = LT(_LOWER
-
- [_QWERTY] = LAYOUT_kc( \
- //,----+----+----+----+----+----. ,----+----+----+----+----+----.
- ESC , Q , W , E , R , T , Y , U , I , O , P ,MINS,
- //|----+----+----+----+----+----| |----+----+----+----+----+----|
- S_TAB, A ,C_S , D ,M_F , G , H ,M_J , K ,C_L ,SCLN,S_ESC,
- //|----+----+----+----+----+----+ |----+----+----+----+----+----|
- , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, ,
- //`----+----+----+----+----+----/ \----+----+----+----+----+----'
- A_DEL,S_EN,L_SPC,C_BS, C_BS,R_ENT,S_JA,A_DEL
- // `----+----+----+----' `----+----+----+----'
- ),
-
- // \ ^ ! & | @ = + * % -
- // ( # $ " ' ~ ← ↓ ↑ → ` )
- // { [ ] }
-
- [_RAISE] = LAYOUT_kc( \
- //,----+----+----+----+----+----. ,----+----+----+----+----+----.
- ,BSLS,CIRC,EXLM,AMPR,PIPE, AT ,EQL ,PLUS,ASTR,PERC,MINS,
- //|----+----+----+----+----+----| |----+----+----+----+----+----|
- LPRN,HASH,DLR ,DQT ,QUOT,TILD, LEFT,DOWN, UP ,RGHT,GRV ,RPRN,
- //|----+----+----+----+----+----| |----+----+----+----+----+----|
- , , , ,LCBR,LBRC, RBRC,RCBR, , , , ,
- //`----+----+----+----+----+----/ \----+----+----+----+----+----'
- , ,BSPC, , , , ,RST
- // `----+----+----+----' `----+----+----+----'
- ),
-
- [_LOWER] = LAYOUT_kc( \
- //,----+----+----+----+----+----. ,----+----+----+----+----+----.
- , , ,MSF ,MSR ,MST , ,EQL ,PLUS,ASTR,PERC,MINS,
- //|----+----+----+----+----+----| |----+----+----+----+----+----|
- , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
- //|----+----+----+----+----+----| |----+----+----+----+----+----|
- , , , , , , , ,COMM,DOT ,SLSH, ,
- //`----+----+----+--+-+----+----/ \----+----+----+----+----+----'
- RST , , , , ,DEL , ,
- // `----+----+----+----' `----+----+----+----'
- ),
-};
-
-void matrix_init_user(void) {
- //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
- #ifdef SSD1306OLED
- iota_gfx_init(!has_usb()); // turns on the display
- #endif
-}
-
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
-#ifdef SSD1306OLED
-
-// When add source files to SRC in rules.mk, you can use functions.
-const char *read_layer_state(void);
-const char *read_logo(void);
-void set_keylog(uint16_t keycode, keyrecord_t *record);
-const char *read_keylog(void);
-const char *read_keylogs(void);
-
-// const char *read_mode_icon(bool swap);
-// const char *read_host_led_state(void);
-// void set_timelog(void);
-// const char *read_timelog(void);
-
-void matrix_scan_user(void) {
- iota_gfx_task();
-}
-
-void matrix_render_user(struct CharacterMatrix *matrix) {
- if (is_master) {
- // If you want to change the display of OLED, you need to change here
- matrix_write_ln(matrix, read_layer_state());
- matrix_write_ln(matrix, read_keylog());
- matrix_write_ln(matrix, read_keylogs());
- //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
- //matrix_write_ln(matrix, read_host_led_state());
- //matrix_write_ln(matrix, read_timelog());
- } else {
- matrix_write(matrix, read_logo());
- }
-}
-
-void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-void iota_gfx_task_user(void) {
- struct CharacterMatrix matrix;
- matrix_clear(&matrix);
- matrix_render_user(&matrix);
- matrix_update(&display, &matrix);
-}
-#endif//SSD1306OLED
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- if (record->event.pressed) {
-#ifdef SSD1306OLED
- set_keylog(keycode, record);
-#endif
- // set_timelog();
- }
-
- switch (keycode) {
- case QWERTY:
- if (record->event.pressed) {
- set_single_persistent_default_layer(_QWERTY);
- }
- return false;
- break;
- case LOWER:
- if (record->event.pressed) {
- layer_on(_LOWER);
- } else {
- layer_off(_LOWER);
- }
- return false;
- break;
- case RAISE:
- if (record->event.pressed) {
- layer_on(_RAISE);
- } else {
- layer_off(_RAISE);
- }
- return false;
- break;
- }
- return true;
-}
-
diff --git a/keyboards/claw44/lib/glcdfont.c b/keyboards/claw44/lib/glcdfont.c
index 9fa1c806aa..91f53d9c24 100644
--- a/keyboards/claw44/lib/glcdfont.c
+++ b/keyboards/claw44/lib/glcdfont.c
@@ -1,7 +1,17 @@
// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
// See gfxfont.h for newer custom bitmap font info.
-#include "progmem.h"
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include
+ #include
+#elif defined(ESP8266)
+ #include
+#else
+ #define PROGMEM
+#endif
// Standard ASCII 5x7 font
const unsigned char font[] PROGMEM = {
@@ -230,3 +240,4 @@ const unsigned char font[] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
+#endif // FONT5X7_H
diff --git a/keyboards/claw44/lib/host_led_state_reader.c b/keyboards/claw44/lib/host_led_state_reader.c
deleted file mode 100644
index 980823b318..0000000000
--- a/keyboards/claw44/lib/host_led_state_reader.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include
-#include "claw44.h"
-
-char host_led_state_str[24];
-
-const char *read_host_led_state(void)
-{
- uint8_t leds = host_keyboard_leds();
- snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
- (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
- (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
- (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- ");
-
- return host_led_state_str;
-}
diff --git a/keyboards/claw44/lib/keylogger.c b/keyboards/claw44/lib/keylogger.c
deleted file mode 100644
index 092b6929bc..0000000000
--- a/keyboards/claw44/lib/keylogger.c
+++ /dev/null
@@ -1,45 +0,0 @@
-#include
-#include "claw44.h"
-
-char keylog_str[24] = {};
-char keylogs_str[21] = {};
-int keylogs_str_idx = 0;
-
-const char code_to_name[60] = {
- ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
- 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
- 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
- '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
- 'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ',
- ' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '};
-
-void set_keylog(uint16_t keycode, keyrecord_t *record) {
- char name = ' ';
- if (keycode < 60) {
- name = code_to_name[keycode];
- }
-
- // update keylog
- snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
- record->event.key.row, record->event.key.col,
- keycode, name);
-
- // update keylogs
- if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
- keylogs_str_idx = 0;
- for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
- keylogs_str[i] = ' ';
- }
- }
-
- keylogs_str[keylogs_str_idx] = name;
- keylogs_str_idx++;
-}
-
-const char *read_keylog(void) {
- return keylog_str;
-}
-
-const char *read_keylogs(void) {
- return keylogs_str;
-}
diff --git a/keyboards/claw44/lib/layer_state_reader.c b/keyboards/claw44/lib/layer_state_reader.c
deleted file mode 100644
index d92b6df582..0000000000
--- a/keyboards/claw44/lib/layer_state_reader.c
+++ /dev/null
@@ -1,35 +0,0 @@
-
-#include QMK_KEYBOARD_H
-#include
-#include "claw44.h"
-
-#define L_BASE 0
-#define L_LOWER (1<<_LOWER)
-#define L_RAISE (1<<_RAISE)
-#define L_ADJUST (1<<_ADJUST)
-#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
-
-char layer_state_str[24];
-
-const char *read_layer_state(void) {
- switch (layer_state)
- {
- case L_BASE:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default");
- break;
- case L_RAISE:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
- break;
- case L_LOWER:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
- break;
- case L_ADJUST:
- case L_ADJUST_TRI:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
- break;
- default:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
- }
-
- return layer_state_str;
-}
diff --git a/keyboards/claw44/lib/logo_reader.c b/keyboards/claw44/lib/logo_reader.c
deleted file mode 100644
index b5b437b2b8..0000000000
--- a/keyboards/claw44/lib/logo_reader.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include "claw44.h"
-
-const char *read_logo(void) {
- static char logo[] = {
- 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
- 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
- 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
- 0};
-
- return logo;
-}
diff --git a/keyboards/claw44/lib/mode_icon_reader.c b/keyboards/claw44/lib/mode_icon_reader.c
deleted file mode 100644
index a9272bb9a7..0000000000
--- a/keyboards/claw44/lib/mode_icon_reader.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include
-#include "claw44.h"
-
-char mode_icon[24];
-
-const char *read_mode_icon(bool swap) {
- static char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}};
- if (swap == false) {
- snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[0][0], logo[0][1]);
- } else {
- snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[1][0], logo[1][1]);
- }
-
- return mode_icon;
-}
diff --git a/keyboards/claw44/lib/rgb_state_reader.c b/keyboards/claw44/lib/rgb_state_reader.c
deleted file mode 100644
index e0efe2e528..0000000000
--- a/keyboards/claw44/lib/rgb_state_reader.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifdef RGBLIGHT_ENABLE
-
-#include QMK_KEYBOARD_H
-#include
-
-extern rgblight_config_t rgblight_config;
-char rbf_info_str[24];
-const char *read_rgb_info(void) {
-
- snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d",
- rgblight_config.enable ? "on" : "- ", rgblight_config.mode,
- rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
- return rbf_info_str;
-}
-#endif
diff --git a/keyboards/claw44/lib/timelogger.c b/keyboards/claw44/lib/timelogger.c
deleted file mode 100644
index ecd4ed3ea8..0000000000
--- a/keyboards/claw44/lib/timelogger.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include
-#include "claw44.h"
-
-char timelog_str[24] = {};
-int last_time = 0;
-int elapsed_time = 0;
-
-void set_timelog(void) {
- elapsed_time = timer_elapsed(last_time);
- last_time = timer_read();
- snprintf(timelog_str, sizeof(timelog_str), "lt:%5d, et:%5d", last_time, elapsed_time);
-}
-
-const char *read_timelog(void) {
- return timelog_str;
-}
diff --git a/keyboards/claw44/rev1/config.h b/keyboards/claw44/rev1/config.h
index f3406fee5c..dc6e49dd9a 100644
--- a/keyboards/claw44/rev1/config.h
+++ b/keyboards/claw44/rev1/config.h
@@ -19,22 +19,21 @@ along with this program. If not, see .
#pragma once
/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x3060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER yfuku
-#define PRODUCT claw44
-#define DESCRIPTION A split keyboard with 3x6 vertically staggered keys and 4 thumb keys
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x3060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER yfuku
+#define PRODUCT claw44
+#define DESCRIPTION A split keyboard with 3x6 vertically staggered keys and 4 thumb keys
/* key matrix size */
-// Rows are doubled-up
#define MATRIX_ROWS 8
-#define MATRIX_COLS 7
+#define MATRIX_COLS 6
#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
-
-// wiring of each half
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
-// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+#define UNUSED_PINS
+#define DIODE_DIRECTION COL2ROW
+#define SOFT_SERIAL_PIN D2
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/claw44/rev1/matrix.c b/keyboards/claw44/rev1/matrix.c
deleted file mode 100644
index a5896d9792..0000000000
--- a/keyboards/claw44/rev1/matrix.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
-Copyright 2012 Jun Wako
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-/*
- * scan matrix
- */
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "quantum.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else // USE_SERIAL
-# include "split_scomm.h"
-#endif
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- debug_enable = true;
- debug_matrix = true;
- debug_mouse = true;
- // initialize row and col
- unselect_rows();
- init_cols();
-
- setPinOutput(B0);
- setPinOutput(D5);
- writePinHigh(B0);
- writePinHigh(D5);
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- is_master = has_usb();
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
- // Right hand is stored after the left in the matirx so, we need to offset it
- int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i+offset] != cols) {
- matrix_debouncing[i+offset] = cols;
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- matrix[i+offset] = matrix_debouncing[i+offset];
- }
- }
- }
-
- return 1;
-}
-
-#ifdef USE_MATRIX_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
- int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) goto i2c_error;
-
- // start of matrix stored at 0x00
- err = i2c_master_write(0x00);
- if (err) goto i2c_error;
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) goto i2c_error;
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
- }
- matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return err;
- }
-
- return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(int master_changed) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-#ifdef SERIAL_USE_MULTI_TRANSACTION
- int ret=serial_update_buffers(master_changed);
-#else
- int ret=serial_update_buffers();
-#endif
- if (ret ) {
- if(ret==2) writePinLow(B0);
- return 1;
- }
- writePinHigh(B0);
- memcpy(&matrix[slaveOffset],
- (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
- return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
- if (is_master) {
- matrix_master_scan();
- }else{
- matrix_slave_scan();
- int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
- memcpy(&matrix[offset],
- (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH);
- matrix_scan_quantum();
- }
- return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
- int ret = _matrix_scan();
- int mchanged = 1;
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
-// for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
-// i2c_slave_buffer[i] = matrix[offset+i];
-// }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- mchanged = memcmp((void *)serial_master_buffer,
- &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
- #endif
- memcpy((void *)serial_master_buffer,
- &matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
-#endif
-
-#ifdef USE_MATRIX_I2C
- if( i2c_transaction() ) {
-#else // USE_SERIAL
- if( serial_transaction(mchanged) ) {
-#endif
- // turn on the indicator led when halves are disconnected
- writePinLow(D5);
-
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = 0;
- }
- }
- } else {
- // turn off the indicator led on no error
- writePinHigh(D5);
- error_count = 0;
- }
- matrix_scan_quantum();
- return ret;
-}
-
-void matrix_slave_scan(void) {
- _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_MATRIX_I2C
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
- i2c_slave_buffer[i] = matrix[offset+i];
- }
-#else // USE_SERIAL
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- int change = 0;
- #endif
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- if( serial_slave_buffer[i] != matrix[offset+i] )
- change = 1;
- #endif
- serial_slave_buffer[i] = matrix[offset+i];
- }
- #ifdef SERIAL_USE_MULTI_TRANSACTION
- slave_buffer_change_count += change;
- #endif
-#endif
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
- _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
- }
-}
-
-static matrix_row_t read_cols(void)
-{
- matrix_row_t result = 0;
- for(int x = 0; x < MATRIX_COLS; x++) {
- result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
- }
- return result;
-}
-
-static void unselect_rows(void)
-{
- for(int x = 0; x < ROWS_PER_HAND; x++) {
- _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
- _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
- }
-}
-
-static void select_row(uint8_t row)
-{
- _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
- _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/claw44/rev1/rev1.c b/keyboards/claw44/rev1/rev1.c
index 9529636f56..520a869e57 100644
--- a/keyboards/claw44/rev1/rev1.c
+++ b/keyboards/claw44/rev1/rev1.c
@@ -1,8 +1 @@
-#include "claw44.h"
-
-#ifdef SSD1306OLED
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- //led_set_user(usb_led);
-}
-#endif
+#include "rev1.h"
diff --git a/keyboards/claw44/rev1/rev1.h b/keyboards/claw44/rev1/rev1.h
index c6c9057fdc..79ae9586db 100644
--- a/keyboards/claw44/rev1/rev1.h
+++ b/keyboards/claw44/rev1/rev1.h
@@ -1,55 +1,33 @@
#pragma once
-#include "../claw44.h"
-
#include "quantum.h"
-#ifdef RGBLIGHT_ENABLE
-//rgb led driver
-#include "ws2812.h"
-#endif
-
-#ifdef USE_I2C
-#include
-#ifdef __AVR__
- #include
- #include
-#endif
-#endif
-
#define LAYOUT( \
- L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
- L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
- L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
- L30, L31, L32, L33, R30, R31, R32, R33 \
- ) \
- { \
- { L00, L01, L02, L03, L04, L05 }, \
- { L10, L11, L12, L13, L14, L15 }, \
- { L20, L21, L22, L23, L24, L25 }, \
- { KC_NO, KC_NO, L30, L31, L32, L33 }, \
- { R05, R04, R03, R02, R01, R00 }, \
- { R15, R14, R13, R12, R11, R10 }, \
- { R25, R24, R23, R22, R21, R20 }, \
- { KC_NO, KC_NO, R33, R32, R31, R30 } \
- }
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, R30, R31, R32, R33 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { KC_NO, KC_NO, L30, L31, L32, L33 }, \
+ { R05, R04, R03, R02, R01, R00 }, \
+ { R15, R14, R13, R12, R11, R10 }, \
+ { R25, R24, R23, R22, R21, R20 }, \
+ { KC_NO, KC_NO, R33, R32, R31, R30 } \
+ }
#define LAYOUT_kc( \
- L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
- L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
- L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
- L30, L31, L32, L33, R30, R31, R32, R33 \
- ) \
- LAYOUT( \
- KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
- KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
- KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
- KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \
- )
-
-enum layer_number {
- _QWERTY = 0,
- _LOWER,
- _RAISE,
- _ADJUST,
-};
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, R30, R31, R32, R33 \
+ ) \
+ LAYOUT( \
+ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+ KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##R30, KC_##R31, KC_##R32, KC_##R33 \
+ )
diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/claw44/rev1/rules.mk
index 016bc362a1..b1af22c59a 100644
--- a/keyboards/claw44/rev1/rules.mk
+++ b/keyboards/claw44/rev1/rules.mk
@@ -1,7 +1,3 @@
-SRC += rev1/matrix.c
-SRC += rev1/split_util.c
-SRC += rev1/split_scomm.c
-
# Build Options
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
@@ -10,7 +6,6 @@ CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
@@ -20,12 +15,5 @@ SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# If you want to change the display of OLED, you need to change here
-SRC += ./lib/glcdfont.c \
- ./lib/layer_state_reader.c \
- ./lib/logo_reader.c \
- ./lib/keylogger.c \
- # ./lib/rgb_state_reader.c \
- # ./lib/mode_icon_reader.c \
- # ./lib/host_led_state_reader.c \
- # ./lib/timelogger.c \
+OLED_DRIVER_ENABLE = no # Add OLED displays support
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/claw44/rev1/serial_config.h b/keyboards/claw44/rev1/serial_config.h
deleted file mode 100644
index 4fab8e8ddf..0000000000
--- a/keyboards/claw44/rev1/serial_config.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef SOFT_SERIAL_PIN
-#define SOFT_SERIAL_PIN D2
-#define SERIAL_USE_MULTI_TRANSACTION
-#endif
diff --git a/keyboards/claw44/rev1/split_scomm.c b/keyboards/claw44/rev1/split_scomm.c
deleted file mode 100644
index a1fe6ba5b8..0000000000
--- a/keyboards/claw44/rev1/split_scomm.c
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifdef USE_SERIAL
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE flexible API (using multi-type transaction function) --- */
-
-#include
-#include
-#include
-#include
-#include "serial.h"
-#ifdef CONSOLE_ENABLE
- #include
-#endif
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-uint8_t volatile status_com = 0;
-uint8_t volatile status1 = 0;
-uint8_t slave_buffer_change_count = 0;
-uint8_t s_change_old = 0xff;
-uint8_t s_change_new = 0xff;
-
-SSTD_t transactions[] = {
-#define GET_SLAVE_STATUS 0
- /* master buffer not changed, only recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- 0, NULL,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define PUT_MASTER_GET_SLAVE_STATUS 1
- /* master buffer changed need send, and recive slave_buffer_change_count */
- { (uint8_t *)&status_com,
- sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
- sizeof(slave_buffer_change_count), &slave_buffer_change_count,
- },
-#define GET_SLAVE_BUFFER 2
- /* recive serial_slave_buffer */
- { (uint8_t *)&status1,
- 0, NULL,
- sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
- }
-};
-
-void serial_master_init(void)
-{
- soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
-}
-
-void serial_slave_init(void)
-{
- soft_serial_target_init(transactions, TID_LIMIT(transactions));
-}
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(int master_update)
-{
- int status, smatstatus;
- static int need_retry = 0;
-
- if( s_change_old != s_change_new ) {
- smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
- if( smatstatus == TRANSACTION_END ) {
- s_change_old = s_change_new;
-#ifdef CONSOLE_ENABLE
- uprintf("slave matrix = %b %b %b %b\n",
- serial_slave_buffer[0], serial_slave_buffer[1],
- serial_slave_buffer[2], serial_slave_buffer[3]);
-#endif
- }
- } else {
- // serial_slave_buffer dosen't change
- smatstatus = TRANSACTION_END; // dummy status
- }
-
- if( !master_update && !need_retry) {
- status = soft_serial_transaction(GET_SLAVE_STATUS);
- } else {
- status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
- }
- if( status == TRANSACTION_END ) {
- s_change_new = slave_buffer_change_count;
- need_retry = 0;
- } else {
- need_retry = 1;
- }
- return smatstatus;
-}
-
-#endif // SERIAL_USE_MULTI_TRANSACTION
-#endif /* USE_SERIAL */
diff --git a/keyboards/claw44/rev1/split_scomm.h b/keyboards/claw44/rev1/split_scomm.h
deleted file mode 100644
index 873d8939d8..0000000000
--- a/keyboards/claw44/rev1/split_scomm.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef SPLIT_COMM_H
-#define SPLIT_COMM_H
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
-#include "serial.h"
-
-#else
-/* --- USE flexible API (using multi-type transaction function) --- */
-// Buffers for master - slave communication
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-extern uint8_t slave_buffer_change_count;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(int master_changed);
-
-#endif
-
-#endif /* SPLIT_COMM_H */
diff --git a/keyboards/claw44/rev1/split_util.c b/keyboards/claw44/rev1/split_util.c
deleted file mode 100644
index e1ff8b4379..0000000000
--- a/keyboards/claw44/rev1/split_util.c
+++ /dev/null
@@ -1,70 +0,0 @@
-#include
-#include
-#include
-#include
-#include
-#include
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-
-#ifdef USE_MATRIX_I2C
-# include "i2c.h"
-#else
-# include "split_scomm.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-static void setup_handedness(void) {
- #ifdef EE_HANDS
- isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
- #else
- // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
- #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
- isLeftHand = !has_usb();
- #else
- isLeftHand = has_usb();
- #endif
- #endif
-}
-
-static void keyboard_master_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_master_init();
-#else
- serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-
-#ifdef USE_MATRIX_I2C
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
- serial_slave_init();
-#endif
-}
-
-bool has_usb(void) {
- USBCON |= (1 << OTGPADE); //enables VBUS pad
- _delay_us(5);
- return (USBSTA & (1<
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS 0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
-
-void matrix_master_OLED_init (void);
-
-#endif
diff --git a/keyboards/claw44/rules.mk b/keyboards/claw44/rules.mk
index f872b9ebfa..f4d44b23b7 100644
--- a/keyboards/claw44/rules.mk
+++ b/keyboards/claw44/rules.mk
@@ -22,7 +22,6 @@ CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
@@ -30,12 +29,4 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-CUSTOM_MATRIX = yes
-SRC += i2c.c
-SRC += serial.c
-SRC += ssd1306.c
-
-# if firmware size over limit, try this option
-# CFLAGS += -flto
-
DEFAULT_FOLDER = claw44/rev1
diff --git a/keyboards/claw44/serial.c b/keyboards/claw44/serial.c
deleted file mode 100644
index f6293c3dc2..0000000000
--- a/keyboards/claw44/serial.c
+++ /dev/null
@@ -1,589 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- * avr-gcc 4.9.2
- * avr-gcc 5.4.0
- * avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include
-#include
-#include
-#include
-#include
-#include "serial.h"
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
- // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
- #ifdef USE_I2C
- #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
- #error Using ATmega32U4 I2C, so can not use PD0, PD1
- #endif
- #endif
-
- #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
- #define SERIAL_PIN_DDR DDRD
- #define SERIAL_PIN_PORT PORTD
- #define SERIAL_PIN_INPUT PIND
- #if SOFT_SERIAL_PIN == D0
- #define SERIAL_PIN_MASK _BV(PD0)
- #define EIMSK_BIT _BV(INT0)
- #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
- #define SERIAL_PIN_INTERRUPT INT0_vect
- #elif SOFT_SERIAL_PIN == D1
- #define SERIAL_PIN_MASK _BV(PD1)
- #define EIMSK_BIT _BV(INT1)
- #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
- #define SERIAL_PIN_INTERRUPT INT1_vect
- #elif SOFT_SERIAL_PIN == D2
- #define SERIAL_PIN_MASK _BV(PD2)
- #define EIMSK_BIT _BV(INT2)
- #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
- #define SERIAL_PIN_INTERRUPT INT2_vect
- #elif SOFT_SERIAL_PIN == D3
- #define SERIAL_PIN_MASK _BV(PD3)
- #define EIMSK_BIT _BV(INT3)
- #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
- #define SERIAL_PIN_INTERRUPT INT3_vect
- #endif
- #elif SOFT_SERIAL_PIN == E6
- #define SERIAL_PIN_DDR DDRE
- #define SERIAL_PIN_PORT PORTE
- #define SERIAL_PIN_INPUT PINE
- #define SERIAL_PIN_MASK _BV(PE6)
- #define EIMSK_BIT _BV(INT6)
- #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
- #define SERIAL_PIN_INTERRUPT INT6_vect
- #else
- #error invalid SOFT_SERIAL_PIN value
- #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-//////////////// for backward compatibility ////////////////////////////////
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
- #endif
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
- #endif
- uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
- { (uint8_t *)&status0,
- #if SERIAL_MASTER_BUFFER_LENGTH > 0
- sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
- #else
- 0, (uint8_t *)NULL,
- #endif
- #if SERIAL_SLAVE_BUFFER_LENGTH > 0
- sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
- #else
- 0, (uint8_t *)NULL,
- #endif
- }
-};
-
-void serial_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void serial_slave_init(void)
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
-
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers()
-{
- int result;
- result = soft_serial_transaction();
- return result;
-}
-
-#endif // end of Simple API (OLD API, compatible with let's split serial.c)
-////////////////////////////////////////////////////////////////////////////
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
- // custom setup in config.h
- // #define TID_SEND_ADJUST 2
- // #define SERIAL_DELAY 6 // micro sec
- // #define READ_WRITE_START_ADJUST 30 // cycles
- // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-// 0: about 189kbps
-// 1: about 137kbps (default)
-// 2: about 75kbps
-// 3: about 39kbps
-// 4: about 26kbps
-// 5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
- #define TID_SEND_ADJUST 14
-#else
- #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
- // Very High speed
- #define SERIAL_DELAY 4 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 34 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
- // High speed
- #define SERIAL_DELAY 6 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 30 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
- // Middle speed
- #define SERIAL_DELAY 12 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
- // Low speed
- #define SERIAL_DELAY 24 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
- // Very Low speed
- #define SERIAL_DELAY 36 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
- // Ultra Low speed
- #define SERIAL_DELAY 48 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
- #define SLAVE_INT_ACK_WIDTH_UNIT 2
- #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
- _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
- _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
- _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
- SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static
-void serial_input_with_pullup(void) {
- SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static
-uint8_t serial_read_pin(void) {
- return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static
-void serial_low(void) {
- SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static
-void serial_high(void) {
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_output();
- serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_input_with_pullup();
-
- // Enable INT0-INT3,INT6
- EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
- // Trigger on falling edge of INT6
- EICRB &= EICRx_BIT;
-#else
- // Trigger on falling edge of INT0-INT3
- EICRA &= EICRx_BIT;
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static
-void sync_recv(void) {
- for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
- }
- // This shouldn't hang if the target disconnects because the
- // serial line will float to high if the target does disconnect.
- while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static
-void sync_send(void) {
- serial_low();
- serial_delay();
- serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
- uint8_t byte, i, p, pb;
-
- _delay_sub_us(READ_WRITE_START_ADJUST);
- for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
- serial_delay_half1(); // read the middle of pulses
- if( serial_read_pin() ) {
- byte = (byte << 1) | 1; p ^= 1;
- } else {
- byte = (byte << 1) | 0; p ^= 0;
- }
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
- }
- /* recive parity bit */
- serial_delay_half1(); // read the middle of pulses
- pb = serial_read_pin();
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
-
- *pterrcount += (p != pb)? 1 : 0;
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
- uint8_t b, p;
- for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
- if(data & b) {
- serial_high(); p ^= 1;
- } else {
- serial_low(); p ^= 0;
- }
- serial_delay();
- }
- /* send parity bit */
- if(p & 1) { serial_high(); }
- else { serial_low(); }
- serial_delay();
-
- serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-void serial_send_packet(uint8_t *buffer, uint8_t size) {
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- data = buffer[i];
- sync_send();
- serial_write_chunk(data,8);
- }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
- uint8_t pecount = 0;
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- sync_recv();
- data = serial_read_chunk(&pecount, 8);
- buffer[i] = data;
- }
- return pecount == 0;
-}
-
-inline static
-void change_sender2reciver(void) {
- sync_send(); //0
- serial_delay_half1(); //1
- serial_low(); //2
- serial_input_with_pullup(); //2
- serial_delay_half1(); //3
-}
-
-inline static
-void change_reciver2sender(void) {
- sync_recv(); //0
- serial_delay(); //1
- serial_low(); //3
- serial_output(); //3
- serial_delay_half1(); //4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
- bits = (bits & 0x5) + (bits >> 1 & 0x5);
- bits = (bits & 0x3) + (bits >> 2 & 0x3);
- return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- serial_low();
- serial_output();
- SSTD_t *trans = Transaction_table;
-#else
- // recive transaction table index
- uint8_t tid, bits;
- uint8_t pecount = 0;
- sync_recv();
- bits = serial_read_chunk(&pecount,7);
- tid = bits>>3;
- bits = (bits&7) != nibble_bits_count(tid);
- if( bits || pecount> 0 || tid > Transaction_table_size ) {
- return;
- }
- serial_delay_half1();
-
- serial_high(); // response step1 low->high
- serial_output();
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
- SSTD_t *trans = &Transaction_table[tid];
- serial_low(); // response step2 ack high->low
-#endif
-
- // target send phase
- if( trans->target2initiator_buffer_size > 0 )
- serial_send_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size);
- // target switch to input
- change_sender2reciver();
-
- // target recive phase
- if( trans->initiator2target_buffer_size > 0 ) {
- if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size) ) {
- *trans->status = TRANSACTION_ACCEPTED;
- } else {
- *trans->status = TRANSACTION_DATA_ERROR;
- }
- } else {
- *trans->status = TRANSACTION_ACCEPTED;
- }
-
- sync_recv(); //weit initiator output to high
-}
-
-/////////
-// start transaction by initiator
-//
-// int soft_serial_transaction(int sstd_index)
-//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void) {
- SSTD_t *trans = Transaction_table;
-#else
-int soft_serial_transaction(int sstd_index) {
- if( sstd_index > Transaction_table_size )
- return TRANSACTION_TYPE_ERROR;
- SSTD_t *trans = &Transaction_table[sstd_index];
-#endif
- cli();
-
- // signal to the target that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(SLAVE_INT_WIDTH_US);
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- // wait for the target response
- serial_input_with_pullup();
- _delay_us(SLAVE_INT_RESPONSE_TIME);
-
- // check if the target is present
- if (serial_read_pin()) {
- // target failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
-
-#else
- // send transaction table index
- int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
- sync_send();
- _delay_sub_us(TID_SEND_ADJUST);
- serial_write_chunk(tid, 7);
- serial_delay_half1();
-
- // wait for the target response (step1 low->high)
- serial_input_with_pullup();
- while( !serial_read_pin() ) {
- _delay_sub_us(2);
- }
-
- // check if the target is present (step2 high->low)
- for( int i = 0; serial_read_pin(); i++ ) {
- if (i > SLAVE_INT_ACK_WIDTH + 1) {
- // slave failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
- }
-#endif
-
- // initiator recive phase
- // if the target is present syncronize with it
- if( trans->target2initiator_buffer_size > 0 ) {
- if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size) ) {
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_DATA_ERROR;
- sei();
- return TRANSACTION_DATA_ERROR;
- }
- }
-
- // initiator switch to output
- change_reciver2sender();
-
- // initiator send phase
- if( trans->initiator2target_buffer_size > 0 ) {
- serial_send_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size);
- }
-
- // always, release the line when not in use
- sync_send();
-
- *trans->status = TRANSACTION_END;
- sei();
- return TRANSACTION_END;
-}
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
- SSTD_t *trans = &Transaction_table[sstd_index];
- cli();
- int retval = *trans->status;
- *trans->status = 0;;
- sei();
- return retval;
-}
-#endif
-
-#endif
-
-// Helix serial.c history
-// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-// (adjusted with avr-gcc 7.3.0)
-// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-// (adjusted with avr-gcc 5.4.0, 7.3.0)
diff --git a/keyboards/claw44/serial.h b/keyboards/claw44/serial.h
deleted file mode 100644
index 7e0c0847a4..0000000000
--- a/keyboards/claw44/serial.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef SOFT_SERIAL_H
-#define SOFT_SERIAL_H
-
-#include
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
-// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-// // 1: about 137kbps (default)
-// // 2: about 75kbps
-// // 3: about 39kbps
-// // 4: about 26kbps
-// // 5: about 20kbps
-//
-// //// USE Simple API (OLD API, compatible with let's split serial.c)
-// ex.
-// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-// #define SERIAL_MASTER_BUFFER_LENGTH 1
-//
-// //// USE flexible API (using multi-type transaction function)
-// #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
-#if SERIAL_SLAVE_BUFFER_LENGTH > 0
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-#endif
-#if SERIAL_MASTER_BUFFER_LENGTH > 0
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-#endif
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-
-#endif // USE Simple API
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t {
- uint8_t *status;
- uint8_t initiator2target_buffer_size;
- uint8_t *initiator2target_buffer;
- uint8_t target2initiator_buffer_size;
- uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR 0x2
-#define TRANSACTION_TYPE_ERROR 0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void);
-#else
-int soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-// initiator:
-// TRANSACTION_END
-// or TRANSACTION_NO_RESPONSE
-// or TRANSACTION_DATA_ERROR
-// target:
-// TRANSACTION_DATA_ERROR
-// or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index);
-#endif
-
-#endif /* SOFT_SERIAL_H */
diff --git a/keyboards/claw44/ssd1306.c b/keyboards/claw44/ssd1306.c
deleted file mode 100644
index 7dea1cc176..0000000000
--- a/keyboards/claw44/ssd1306.c
+++ /dev/null
@@ -1,345 +0,0 @@
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "i2c.h"
-#include
-#include "print.h"
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "timer.h"
-
-struct CharacterMatrix display;
-
-extern const unsigned char font[] PROGMEM;
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble. Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-
-// 'last_flush' is declared as uint16_t,
-// so this must be less than 65535
-#define ScreenOffInterval 60000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-static bool force_dirty = true;
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
- bool res = false;
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
- goto done;
- }
-
- if (i2c_master_write(0x0 /* command byte follows */)) {
- print("failed to write control byte\n");
-
- goto done;
- }
-
- if (i2c_master_write(cmd)) {
- xprintf("failed to write command %d\n", cmd);
- goto done;
- }
- res = true;
-done:
- i2c_master_stop();
- return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- if (!_send_cmd1(opr1)) {
- return false;
- }
- return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void clear_display(void) {
- matrix_clear(&display);
-
- // Clear all of the display bits (there can be random noise
- // in the RAM on startup)
- send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
- send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < DisplayWidth; ++col) {
- i2c_master_write(0);
- }
- }
-
- display.dirty = false;
-
-done:
- i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
- sendchar(c);
- iota_gfx_write_char(c);
-
- if (!displaying) {
- iota_gfx_flush();
- }
- return 0;
-}
-#endif
-
-bool iota_gfx_init(bool rotate) {
- bool success = false;
-
- i2c_master_init();
- send_cmd1(DisplayOff);
- send_cmd2(SetDisplayClockDiv, 0x80);
- send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
- send_cmd2(SetDisplayOffset, 0);
-
-
- send_cmd1(SetStartLine | 0x0);
- send_cmd2(SetChargePump, 0x14 /* Enable */);
- send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
- if(rotate){
- // the following Flip the display orientation 180 degrees
- send_cmd1(SegRemap);
- send_cmd1(ComScanInc);
- }else{
- // Flips the display orientation 0 degrees
- send_cmd1(SegRemap | 0x1);
- send_cmd1(ComScanDec);
- }
-
- send_cmd2(SetComPins, 0x2);
- send_cmd2(SetContrast, 0x8f);
- send_cmd2(SetPreCharge, 0xf1);
- send_cmd2(SetVComDetect, 0x40);
- send_cmd1(DisplayAllOnResume);
- send_cmd1(NormalDisplay);
- send_cmd1(DeActivateScroll);
- send_cmd1(DisplayOn);
-
- send_cmd2(SetContrast, 0); // Dim
-
- clear_display();
-
- success = true;
-
- iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
- print_set_sendchar(capture_sendchar);
-#endif
-
-done:
- return success;
-}
-
-bool iota_gfx_off(void) {
- bool success = false;
-
- send_cmd1(DisplayOff);
- success = true;
-
-done:
- return success;
-}
-
-bool iota_gfx_on(void) {
- bool success = false;
-
- send_cmd1(DisplayOn);
- success = true;
-
-done:
- return success;
-}
-
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
- *matrix->cursor = c;
- ++matrix->cursor;
-
- if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
- // We went off the end; scroll the display upwards by one line
- memmove(&matrix->display[0], &matrix->display[1],
- MatrixCols * (MatrixRows - 1));
- matrix->cursor = &matrix->display[MatrixRows - 1][0];
- memset(matrix->cursor, ' ', MatrixCols);
- }
-}
-
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
- matrix->dirty = true;
-
- if (c == '\n') {
- // Clear to end of line from the cursor and then move to the
- // start of the next line
- uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
- while (cursor_col++ < MatrixCols) {
- matrix_write_char_inner(matrix, ' ');
- }
- return;
- }
-
- matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
- matrix_write_char(&display, c);
-}
-
-void matrix_write(struct CharacterMatrix *matrix, const char *data) {
- const char *end = data + strlen(data);
- while (data < end) {
- matrix_write_char(matrix, *data);
- ++data;
- }
-}
-
-void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
- char data_ln[strlen(data)+2];
- snprintf(data_ln, sizeof(data_ln), "%s\n", data);
- matrix_write(matrix, data_ln);
-}
-
-void iota_gfx_write(const char *data) {
- matrix_write(&display, data);
-}
-
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
- while (true) {
- uint8_t c = pgm_read_byte(data);
- if (c == 0) {
- return;
- }
- matrix_write_char(matrix, c);
- ++data;
- }
-}
-
-void iota_gfx_write_P(const char *data) {
- matrix_write_P(&display, data);
-}
-
-void matrix_clear(struct CharacterMatrix *matrix) {
- memset(matrix->display, ' ', sizeof(matrix->display));
- matrix->cursor = &matrix->display[0][0];
- matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
- matrix_clear(&display);
-}
-
-void matrix_render(struct CharacterMatrix *matrix) {
- last_flush = timer_read();
- iota_gfx_on();
-#if DEBUG_TO_SCREEN
- ++displaying;
-#endif
-
- // Move to the home position
- send_cmd3(PageAddr, 0, MatrixRows - 1);
- send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
- if (i2c_start_write(SSD1306_ADDRESS)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
-
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < MatrixCols; ++col) {
- const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
-
- for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
- uint8_t colBits = pgm_read_byte(glyph + glyphCol);
- i2c_master_write(colBits);
- }
-
- // 1 column of space between chars (it's not included in the glyph)
- //i2c_master_write(0);
- }
- }
-
- matrix->dirty = false;
-
-done:
- i2c_master_stop();
-#if DEBUG_TO_SCREEN
- --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
- matrix_render(&display);
-}
-
-__attribute__ ((weak))
-void iota_gfx_task_user(void) {
-}
-
-void iota_gfx_task(void) {
- iota_gfx_task_user();
-
- if (display.dirty|| force_dirty) {
- iota_gfx_flush();
- force_dirty = false;
- }
-
- /*
- if (timer_elapsed(last_flush) > ScreenOffInterval) {
- iota_gfx_off();
- }
- */
-}
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
- force_dirty = true;
- return true;
-}
-
-#endif
diff --git a/keyboards/claw44/ssd1306.h b/keyboards/claw44/ssd1306.h
deleted file mode 100644
index 11a3cc67f4..0000000000
--- a/keyboards/claw44/ssd1306.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#pragma once
-
-#include
-#include
-#include "action.h"
-
-enum ssd1306_cmds {
- DisplayOff = 0xAE,
- DisplayOn = 0xAF,
-
- SetContrast = 0x81,
- DisplayAllOnResume = 0xA4,
-
- DisplayAllOn = 0xA5,
- NormalDisplay = 0xA6,
- InvertDisplay = 0xA7,
- SetDisplayOffset = 0xD3,
- SetComPins = 0xda,
- SetVComDetect = 0xdb,
- SetDisplayClockDiv = 0xD5,
- SetPreCharge = 0xd9,
- SetMultiPlex = 0xa8,
- SetLowColumn = 0x00,
- SetHighColumn = 0x10,
- SetStartLine = 0x40,
-
- SetMemoryMode = 0x20,
- ColumnAddr = 0x21,
- PageAddr = 0x22,
-
- ComScanInc = 0xc0,
- ComScanDec = 0xc8,
- SegRemap = 0xa0,
- SetChargePump = 0x8d,
- ExternalVcc = 0x01,
- SwitchCapVcc = 0x02,
-
- ActivateScroll = 0x2f,
- DeActivateScroll = 0x2e,
- SetVerticalScrollArea = 0xa3,
- RightHorizontalScroll = 0x26,
- LeftHorizontalScroll = 0x27,
- VerticalAndRightHorizontalScroll = 0x29,
- VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#ifndef SSD1306_ADDRESS
-#define SSD1306_ADDRESS 0x3C
-#endif
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
- uint8_t display[MatrixRows][MatrixCols];
- uint8_t *cursor;
- bool dirty;
-};
-
-extern struct CharacterMatrix display;
-
-bool iota_gfx_init(bool rotate);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-void iota_gfx_task_user(void);
-
-void matrix_clear(struct CharacterMatrix *matrix);
-void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
-void matrix_write(struct CharacterMatrix *matrix, const char *data);
-void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
-void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
-void matrix_render(struct CharacterMatrix *matrix);
-
-bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
--
cgit v1.2.3