From 13b2b93fb0e66e421430733360f0af852bae8964 Mon Sep 17 00:00:00 2001 From: jpe230 Date: Fri, 8 Jul 2022 17:33:03 -0500 Subject: Add Adafruit Macropad (#17512) --- keyboards/adafruit/macropad/readme.md | 37 +++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 keyboards/adafruit/macropad/readme.md (limited to 'keyboards/adafruit/macropad/readme.md') diff --git a/keyboards/adafruit/macropad/readme.md b/keyboards/adafruit/macropad/readme.md new file mode 100644 index 0000000000..fe7375b336 --- /dev/null +++ b/keyboards/adafruit/macropad/readme.md @@ -0,0 +1,37 @@ +# Adafruit MacroPad RP2040 + +![AdafruitMacropad](https://i.imgur.com/dSBSwcJh.jpeg) + +A RP2040-powered Macropad with a 3x4 layout. + +- Keyboard Maintainer: [Jpe230](https://github.com/jpe230/) +- Hardware Supported: Adafruit MacroPad RP2040 +- Hardware Availability: [Barebones kit](https://www.adafruit.com/product/5100) [Starter Kit](https://www.adafruit.com/product/5128) + +Make example for this board (after setting up your build environment): + +```sh +qmk compile -kb adafruit/macropad -km default +``` + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Features + +- Raspberry Pi RP2040 Chip + 8MB Flash memory - Dual-core Cortex M0+ at ~130MHz with 264KB of RAM. +- 3x4 Mechanical key switch sockets - accepts any Cherry MX-compatible switches. Individually tied to GPIO pins (not matrix wired) +- One NeoPixel RGB LED per switch, on north side. +- Rotary encoder, 20 detents per rotation, with push-switch on GPIO pin. Push switch is also used for entering bootloader mode when held down on power-up or reset. +- 128x64 SH1106 Monochrome OLED display - On high-speed hardware SPI port for quick updates. +- 8mm Speaker/Buzzer - With Class D amplifier and RC filter, can be used to make simple beeps and sounds effects. (Unsupported for now) +- STEMMA QT Connector - Allows adding any I2C sensors/displays/devices with plug-and-play cables. +- Reset button - On the side, for quick restarting, press it twice to enter bootloader. +- Four M3 mounting bosses - Make custom enclosures easily. + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the rotary encoder push-button on power-up or reset. +* **Physical reset button**: Press twice the button on the side while the board is connected. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. -- cgit v1.2.3