From 63646e8906e062d1c1de3925cba70c4e3426a855 Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Sat, 12 Feb 2022 10:29:31 -0800 Subject: Format code according to conventions (#16322) --- drivers/bluetooth/bluefruit_le.cpp | 26 ++++++++++++------- drivers/bluetooth/outputselect.c | 2 +- drivers/bluetooth/rn42.c | 8 +++--- drivers/eeprom/eeprom_driver.c | 12 ++++++--- drivers/eeprom/eeprom_i2c.c | 6 ++--- drivers/eeprom/eeprom_spi.c | 12 ++++++--- drivers/eeprom/eeprom_transient.c | 8 ++++-- drivers/eeprom/eeprom_transient.h | 2 +- drivers/flash/flash_spi.c | 12 ++++++--- drivers/gpio/mcp23018.c | 6 ++--- drivers/haptic/DRV2605L.c | 6 +++-- drivers/haptic/solenoid.c | 20 ++++++++++---- drivers/lcd/st7565.c | 25 ++++++++++++------ drivers/lcd/st7565.h | 8 +++--- drivers/led/apa102.c | 10 ++++--- drivers/led/aw20216.c | 14 +++++----- drivers/led/issi/is31fl3731-simple.c | 6 ++--- drivers/led/issi/is31fl3731.c | 6 ++--- drivers/led/issi/is31fl3733-simple.c | 20 +++++++------- drivers/led/issi/is31fl3733-simple.h | 14 +++++----- drivers/led/issi/is31fl3733.c | 20 +++++++------- drivers/led/issi/is31fl3733.h | 14 +++++----- drivers/led/issi/is31fl3736.c | 20 +++++++------- drivers/led/issi/is31fl3736.h | 16 ++++++------ drivers/led/issi/is31fl3737.c | 20 +++++++------- drivers/led/issi/is31fl3737.h | 16 ++++++------ drivers/led/issi/is31fl3741.c | 20 +++++++------- drivers/led/issi/is31fl3741.h | 16 ++++++------ drivers/oled/oled_driver.h | 22 ++++++++-------- drivers/oled/ssd1306_sh1106.c | 49 +++++++++++++++++++++++------------ drivers/ps2/ps2_busywait.c | 6 ++--- drivers/ps2/ps2_interrupt.c | 16 +++++++----- drivers/ps2/ps2_mouse.c | 28 ++++++++++++++------ drivers/sensors/adns5050.c | 10 ++++--- drivers/sensors/adns9800.c | 4 ++- drivers/sensors/analog_joystick.c | 2 +- drivers/sensors/cirque_pinnacle.c | 38 +++++++++++++++------------ drivers/sensors/cirque_pinnacle.h | 8 +++--- drivers/sensors/cirque_pinnacle_i2c.c | 4 +-- drivers/sensors/cirque_pinnacle_spi.c | 10 +++---- drivers/sensors/pimoroni_trackball.c | 4 ++- drivers/sensors/pmw3360.c | 14 +++++----- drivers/sensors/pmw3360.h | 8 +++--- drivers/sensors/pmw3389.c | 14 +++++----- drivers/sensors/pmw3389.h | 8 +++--- drivers/usb2422.c | 14 +++++----- drivers/ws2812.h | 8 +++--- 47 files changed, 365 insertions(+), 267 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/bluefruit_le.cpp b/drivers/bluetooth/bluefruit_le.cpp index 86581a1a48..19310767cf 100644 --- a/drivers/bluetooth/bluefruit_le.cpp +++ b/drivers/bluetooth/bluefruit_le.cpp @@ -29,7 +29,7 @@ #endif #ifndef BLUEFRUIT_LE_SCK_DIVISOR -# define BLUEFRUIT_LE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE +# define BLUEFRUIT_LE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE #endif #define SAMPLE_BATTERY @@ -77,10 +77,10 @@ struct sdep_msg { // information here. enum queue_type { - QTKeyReport, // 1-byte modifier + 6-byte key report - QTConsumer, // 16-bit key code + QTKeyReport, // 1-byte modifier + 6-byte key report + QTConsumer, // 16-bit key code #ifdef MOUSE_ENABLE - QTMouseMove, // 4-byte mouse report + QTMouseMove, // 4-byte mouse report #endif }; @@ -115,8 +115,8 @@ enum sdep_type { SdepResponse = 0x20, SdepAlert = 0x40, SdepError = 0x80, - SdepSlaveNotReady = 0xFE, // Try again later - SdepSlaveOverflow = 0xFF, // You read more data than is available + SdepSlaveNotReady = 0xFE, // Try again later + SdepSlaveOverflow = 0xFF, // You read more data than is available }; enum ble_cmd { @@ -306,13 +306,15 @@ static bool ble_init(void) { wait_ms(10); writePinHigh(BLUEFRUIT_LE_RST_PIN); - wait_ms(1000); // Give it a second to initialize + wait_ms(1000); // Give it a second to initialize state.initialized = true; return state.initialized; } -static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; } +static inline uint8_t min(uint8_t a, uint8_t b) { + return a < b ? a : b; +} static bool read_response(char *resp, uint16_t resplen, bool verbose) { char *dest = resp; @@ -424,7 +426,9 @@ bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { return at_command(cmdbuf, resp, resplen, verbose); } -bool bluefruit_le_is_connected(void) { return state.is_connected; } +bool bluefruit_le_is_connected(void) { + return state.is_connected; +} bool bluefruit_le_enable_keyboard(void) { char resbuf[128]; @@ -671,7 +675,9 @@ void bluefruit_le_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, } #endif -uint32_t bluefruit_le_read_battery_voltage(void) { return state.vbat; } +uint32_t bluefruit_le_read_battery_voltage(void) { + return state.vbat; +} bool bluefruit_le_set_mode_leds(bool on) { if (!state.configured) { diff --git a/drivers/bluetooth/outputselect.c b/drivers/bluetooth/outputselect.c index 44bc4a9aa3..b986ba274e 100644 --- a/drivers/bluetooth/outputselect.c +++ b/drivers/bluetooth/outputselect.c @@ -52,7 +52,7 @@ uint8_t auto_detect_output(void) { #endif #ifdef BLUETOOTH_ENABLE - return OUTPUT_BLUETOOTH; // should check if BT is connected here + return OUTPUT_BLUETOOTH; // should check if BT is connected here #endif return OUTPUT_NONE; diff --git a/drivers/bluetooth/rn42.c b/drivers/bluetooth/rn42.c index 2ef40bb7e0..5d497cda20 100644 --- a/drivers/bluetooth/rn42.c +++ b/drivers/bluetooth/rn42.c @@ -61,7 +61,9 @@ static inline uint16_t rn42_consumer_usage_to_bitmap(uint16_t usage) { } } -void rn42_init(void) { uart_init(RN42_BAUD_RATE); } +void rn42_init(void) { + uart_init(RN42_BAUD_RATE); +} void rn42_send_keyboard(report_keyboard_t *report) { uart_write(0xFD); @@ -81,8 +83,8 @@ void rn42_send_mouse(report_mouse_t *report) { uart_write(report->buttons); uart_write(report->x); uart_write(report->y); - uart_write(report->v); // should try sending the wheel v here - uart_write(report->h); // should try sending the wheel h here + uart_write(report->v); // should try sending the wheel v here + uart_write(report->h); // should try sending the wheel h here uart_write(0x00); } diff --git a/drivers/eeprom/eeprom_driver.c b/drivers/eeprom/eeprom_driver.c index 6ce47faf7d..885cf21981 100644 --- a/drivers/eeprom/eeprom_driver.c +++ b/drivers/eeprom/eeprom_driver.c @@ -37,11 +37,17 @@ uint32_t eeprom_read_dword(const uint32_t *addr) { return ret; } -void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); } +void eeprom_write_byte(uint8_t *addr, uint8_t value) { + eeprom_write_block(&value, addr, 1); +} -void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); } +void eeprom_write_word(uint16_t *addr, uint16_t value) { + eeprom_write_block(&value, addr, 2); +} -void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); } +void eeprom_write_dword(uint32_t *addr, uint32_t value) { + eeprom_write_block(&value, addr, 4); +} void eeprom_update_block(const void *buf, void *addr, size_t len) { uint8_t read_buf[len]; diff --git a/drivers/eeprom/eeprom_i2c.c b/drivers/eeprom/eeprom_i2c.c index 8e80ff544f..a74a010415 100644 --- a/drivers/eeprom/eeprom_i2c.c +++ b/drivers/eeprom/eeprom_i2c.c @@ -43,7 +43,7 @@ #if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT) # include "timer.h" # include "debug.h" -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT static inline void fill_target_address(uint8_t *buffer, const void *addr) { uintptr_t p = (uintptr_t)addr; @@ -91,7 +91,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { dprintf(" %02X", (int)(((uint8_t *)buf)[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT } void eeprom_write_block(const void *buf, void *addr, size_t len) { @@ -122,7 +122,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) { dprintf(" %02X", (int)(read_buf[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100); wait_ms(EXTERNAL_EEPROM_WRITE_TIME); diff --git a/drivers/eeprom/eeprom_spi.c b/drivers/eeprom/eeprom_spi.c index e273090854..25955498c4 100644 --- a/drivers/eeprom/eeprom_spi.c +++ b/drivers/eeprom/eeprom_spi.c @@ -52,7 +52,9 @@ # define EXTERNAL_EEPROM_SPI_TIMEOUT 100 #endif -static bool spi_eeprom_start(void) { return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); } +static bool spi_eeprom_start(void) { + return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); +} static spi_status_t spi_eeprom_wait_while_busy(int timeout) { uint32_t deadline = timer_read32() + timeout; @@ -80,7 +82,9 @@ static void spi_eeprom_transmit_address(uintptr_t addr) { //---------------------------------------------------------------------------------------------------------------------- -void eeprom_driver_init(void) { spi_init(); } +void eeprom_driver_init(void) { + spi_init(); +} void eeprom_driver_erase(void) { #if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT) @@ -135,7 +139,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { dprintf(" %02X", (int)(((uint8_t *)buf)[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT spi_stop(); } @@ -192,7 +196,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) { dprintf(" %02X", (int)(uint8_t)(read_buf[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT spi_write(CMD_WRITE); spi_eeprom_transmit_address(target_addr); diff --git a/drivers/eeprom/eeprom_transient.c b/drivers/eeprom/eeprom_transient.c index b4c78c6f40..9dc4289c27 100644 --- a/drivers/eeprom/eeprom_transient.c +++ b/drivers/eeprom/eeprom_transient.c @@ -30,9 +30,13 @@ size_t clamp_length(intptr_t offset, size_t len) { return len; } -void eeprom_driver_init(void) { eeprom_driver_erase(); } +void eeprom_driver_init(void) { + eeprom_driver_erase(); +} -void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); } +void eeprom_driver_erase(void) { + memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); +} void eeprom_read_block(void *buf, const void *addr, size_t len) { intptr_t offset = (intptr_t)addr; diff --git a/drivers/eeprom/eeprom_transient.h b/drivers/eeprom/eeprom_transient.h index d06189b246..687b8619fe 100644 --- a/drivers/eeprom/eeprom_transient.h +++ b/drivers/eeprom/eeprom_transient.h @@ -21,5 +21,5 @@ */ #ifndef TRANSIENT_EEPROM_SIZE # include "eeconfig.h" -# define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO +# define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO #endif diff --git a/drivers/flash/flash_spi.c b/drivers/flash/flash_spi.c index 2fa8891e38..f4cbf65159 100644 --- a/drivers/flash/flash_spi.c +++ b/drivers/flash/flash_spi.c @@ -65,7 +65,9 @@ along with this program. If not, see . // #define DEBUG_FLASH_SPI_OUTPUT -static bool spi_flash_start(void) { return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR); } +static bool spi_flash_start(void) { + return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR); +} static flash_status_t spi_flash_wait_while_busy(void) { uint32_t deadline = timer_read32() + EXTERNAL_FLASH_SPI_TIMEOUT; @@ -160,7 +162,9 @@ static flash_status_t spi_flash_transaction(uint8_t cmd, uint32_t addr, uint8_t return response; } -void flash_init(void) { spi_init(); } +void flash_init(void) { + spi_init(); +} flash_status_t flash_erase_chip(void) { flash_status_t response = FLASH_STATUS_SUCCESS; @@ -304,7 +308,7 @@ flash_status_t flash_read_block(uint32_t addr, void *buf, size_t len) { dprintf(" %02X", (int)(((uint8_t *)read_buf)[i])); } dprintf("\n"); -#endif // DEBUG_FLASH_SPI_OUTPUT +#endif // DEBUG_FLASH_SPI_OUTPUT return response; } @@ -340,7 +344,7 @@ flash_status_t flash_write_block(uint32_t addr, const void *buf, size_t len) { dprintf(" %02X", (int)(uint8_t)(write_buf[i])); } dprintf("\n"); -#endif // DEBUG_FLASH_SPI_OUTPUT +#endif // DEBUG_FLASH_SPI_OUTPUT /* Perform the write. */ response = spi_flash_transaction(FLASH_CMD_PP, addr, write_buf, write_length); diff --git a/drivers/gpio/mcp23018.c b/drivers/gpio/mcp23018.c index dc8ab03c50..41cbfe087e 100644 --- a/drivers/gpio/mcp23018.c +++ b/drivers/gpio/mcp23018.c @@ -10,11 +10,11 @@ #define TIMEOUT 100 enum { - CMD_IODIRA = 0x00, // i/o direction register + CMD_IODIRA = 0x00, // i/o direction register CMD_IODIRB = 0x01, - CMD_GPPUA = 0x0C, // GPIO pull-up resistor register + CMD_GPPUA = 0x0C, // GPIO pull-up resistor register CMD_GPPUB = 0x0D, - CMD_GPIOA = 0x12, // general purpose i/o port register (write modifies OLAT) + CMD_GPIOA = 0x12, // general purpose i/o port register (write modifies OLAT) CMD_GPIOB = 0x13, }; diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c index 5de2b354c9..5a1d2ca0af 100644 --- a/drivers/haptic/DRV2605L.c +++ b/drivers/haptic/DRV2605L.c @@ -106,12 +106,14 @@ void DRV_init(void) { void DRV_rtp_init(void) { DRV_write(DRV_GO, 0x00); - DRV_write(DRV_RTP_INPUT, 20); // 20 is the lowest value I've found where haptics can still be felt. + DRV_write(DRV_RTP_INPUT, 20); // 20 is the lowest value I've found where haptics can still be felt. DRV_write(DRV_MODE, 0x05); DRV_write(DRV_GO, 0x01); } -void DRV_amplitude(uint8_t amplitude) { DRV_write(DRV_RTP_INPUT, amplitude); } +void DRV_amplitude(uint8_t amplitude) { + DRV_write(DRV_RTP_INPUT, amplitude); +} void DRV_pulse(uint8_t sequence) { DRV_write(DRV_GO, 0x00); diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c index 7a09940f78..14d868bffe 100644 --- a/drivers/haptic/solenoid.c +++ b/drivers/haptic/solenoid.c @@ -28,13 +28,21 @@ uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL; extern haptic_config_t haptic_config; -void solenoid_buzz_on(void) { haptic_set_buzz(1); } +void solenoid_buzz_on(void) { + haptic_set_buzz(1); +} -void solenoid_buzz_off(void) { haptic_set_buzz(0); } +void solenoid_buzz_off(void) { + haptic_set_buzz(0); +} -void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); } +void solenoid_set_buzz(int buzz) { + haptic_set_buzz(buzz); +} -void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; } +void solenoid_set_dwell(uint8_t dwell) { + solenoid_dwell = dwell; +} void solenoid_stop(void) { SOLENOID_PIN_WRITE_INACTIVE(); @@ -89,4 +97,6 @@ void solenoid_setup(void) { } } -void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); } +void solenoid_shutdown(void) { + SOLENOID_PIN_WRITE_INACTIVE(); +} diff --git a/drivers/lcd/st7565.c b/drivers/lcd/st7565.c index 49b13c00f1..47ee02804b 100644 --- a/drivers/lcd/st7565.c +++ b/drivers/lcd/st7565.c @@ -39,7 +39,7 @@ along with this program. If not, see . // Addressing Setting Commands #define PAM_SETCOLUMN_LSB 0x00 #define PAM_SETCOLUMN_MSB 0x10 -#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 +#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 // Hardware Configuration Commands #define DISPLAY_START_LINE 0x40 @@ -138,7 +138,9 @@ bool st7565_init(display_rotation_t rotation) { return true; } -__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) { return rotation; } +__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) { + return rotation; +} void st7565_clear(void) { memset(st7565_buffer, 0, sizeof(st7565_buffer)); @@ -212,7 +214,8 @@ void st7565_advance_page(bool clearPageRemainder) { remaining = remaining / ST7565_FONT_WIDTH; // Write empty character until next line - while (remaining--) st7565_write_char(' ', false); + while (remaining--) + st7565_write_char(' ', false); } else { // Next page index out of bounds? if (index + remaining >= ST7565_MATRIX_SIZE) { @@ -263,7 +266,7 @@ void st7565_write_char(const char data, bool invert) { _Static_assert(sizeof(font) >= ((ST7565_FONT_END + 1 - ST7565_FONT_START) * ST7565_FONT_WIDTH), "ST7565_FONT_END references outside array"); // set the reder buffer data - uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index + uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index if (cast_data < ST7565_FONT_START || cast_data > ST7565_FONT_END) { memset(st7565_cursor, 0x00, ST7565_FONT_WIDTH); } else { @@ -389,7 +392,7 @@ void st7565_write_raw_P(const char *data, uint16_t size) { st7565_dirty |= ((ST7565_BLOCK_TYPE)1 << (i / ST7565_BLOCK_SIZE)); } } -#endif // defined(__AVR__) +#endif // defined(__AVR__) bool st7565_on(void) { if (!st7565_initialized) { @@ -429,7 +432,9 @@ bool st7565_off(void) { __attribute__((weak)) void st7565_off_user(void) {} -bool st7565_is_on(void) { return st7565_active; } +bool st7565_is_on(void) { + return st7565_active; +} bool st7565_invert(bool invert) { if (!st7565_initialized) { @@ -445,9 +450,13 @@ bool st7565_invert(bool invert) { return st7565_inverted; } -uint8_t st7565_max_chars(void) { return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH; } +uint8_t st7565_max_chars(void) { + return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH; +} -uint8_t st7565_max_lines(void) { return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT; } +uint8_t st7565_max_lines(void) { + return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT; +} void st7565_task(void) { if (!st7565_initialized) { diff --git a/drivers/lcd/st7565.h b/drivers/lcd/st7565.h index d453dbe6da..0e42c8765b 100644 --- a/drivers/lcd/st7565.h +++ b/drivers/lcd/st7565.h @@ -29,16 +29,16 @@ along with this program. If not, see . # define ST7565_DISPLAY_HEIGHT 32 #endif #ifndef ST7565_MATRIX_SIZE -# define ST7565_MATRIX_SIZE (ST7565_DISPLAY_HEIGHT / 8 * ST7565_DISPLAY_WIDTH) // 1024 (compile time mathed) +# define ST7565_MATRIX_SIZE (ST7565_DISPLAY_HEIGHT / 8 * ST7565_DISPLAY_WIDTH) // 1024 (compile time mathed) #endif #ifndef ST7565_BLOCK_TYPE # define ST7565_BLOCK_TYPE uint16_t #endif #ifndef ST7565_BLOCK_COUNT -# define ST7565_BLOCK_COUNT (sizeof(ST7565_BLOCK_TYPE) * 8) // 32 (compile time mathed) +# define ST7565_BLOCK_COUNT (sizeof(ST7565_BLOCK_TYPE) * 8) // 32 (compile time mathed) #endif #ifndef ST7565_BLOCK_SIZE -# define ST7565_BLOCK_SIZE (ST7565_MATRIX_SIZE / ST7565_BLOCK_COUNT) // 32 (compile time mathed) +# define ST7565_BLOCK_SIZE (ST7565_MATRIX_SIZE / ST7565_BLOCK_COUNT) // 32 (compile time mathed) #endif // the column address corresponding to the first column in the display hardware @@ -174,7 +174,7 @@ void st7565_write_raw_P(const char *data, uint16_t size); # define st7565_write_P(data, invert) st7565_write(data, invert) # define st7565_write_ln_P(data, invert) st7565_write_ln(data, invert) # define st7565_write_raw_P(data, size) st7565_write_raw(data, size) -#endif // defined(__AVR__) +#endif // defined(__AVR__) // Can be used to manually turn on the screen if it is off // Returns true if the screen was on or turns on diff --git a/drivers/led/apa102.c b/drivers/led/apa102.c index 00e7eb4505..f291948975 100644 --- a/drivers/led/apa102.c +++ b/drivers/led/apa102.c @@ -20,15 +20,15 @@ #ifndef APA102_NOPS # if defined(__AVR__) -# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed +# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed # elif defined(PROTOCOL_CHIBIOS) # include "hal.h" # if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103) -# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns +# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns # else # error("APA102_NOPS configuration required") -# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot +# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot # endif # endif #endif @@ -72,7 +72,9 @@ void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds) { } // Overwrite the default rgblight_call_driver to use apa102 driver -void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { apa102_setleds(start_led, num_leds); } +void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { + apa102_setleds(start_led, num_leds); +} void static apa102_init(void) { setPinOutput(RGB_DI_PIN); diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c index 2c7ff8f088..59389cdcd6 100644 --- a/drivers/led/aw20216.c +++ b/drivers/led/aw20216.c @@ -23,17 +23,17 @@ */ #define AWINIC_ID 0b1010 << 4 -#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers -#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control -#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control -#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? -#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? +#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers +#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control +#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control +#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? +#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? #define AW_WRITE 0 #define AW_READ 1 -#define AW_REG_CONFIGURATION 0x00 // PG0 -#define AW_REG_GLOBALCURRENT 0x01 // PG0 +#define AW_REG_CONFIGURATION 0x00 // PG0 +#define AW_REG_GLOBALCURRENT 0x01 // PG0 // Default value of AW_REG_CONFIGURATION // D7:D4 = 1011, SWSEL (SW1~SW12 active) diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index f51e2e38af..3abe9ea337 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -42,13 +42,13 @@ #define ISSI_REG_PICTUREFRAME 0x01 // Not defined in the datasheet -- See AN for IC -#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 #define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -148,7 +148,7 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); -#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); #endif diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index e6190a6b90..9c6c29f081 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -41,13 +41,13 @@ #define ISSI_REG_PICTUREFRAME 0x01 // Not defined in the datasheet -- See AN for IC -#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 #define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -136,7 +136,7 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); -#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); #endif diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c index 777895bf89..af006f756d 100644 --- a/drivers/led/issi/is31fl3733-simple.c +++ b/drivers/led/issi/is31fl3733-simple.c @@ -39,16 +39,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -59,7 +59,7 @@ #endif #ifndef ISSI_PWM_FREQUENCY -# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only #endif #ifndef ISSI_SWPULLUP diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h index f071db5e40..f5253e3101 100644 --- a/drivers/led/issi/is31fl3733-simple.h +++ b/drivers/led/issi/is31fl3733-simple.h @@ -47,13 +47,13 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool value); void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL -#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time -#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time -#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time -#define PUR_16KR 0x06 // 16k Ohm resistor on all the time -#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL #define A_1 0x00 #define A_2 0x01 diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index 696491d070..a2fdaa90fa 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -38,16 +38,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -58,7 +58,7 @@ #endif #ifndef ISSI_PWM_FREQUENCY -# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only #endif #ifndef ISSI_SWPULLUP diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h index c5d62fed85..7653dd17c0 100644 --- a/drivers/led/issi/is31fl3733.h +++ b/drivers/led/issi/is31fl3733.h @@ -48,13 +48,13 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL -#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time -#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time -#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time -#define PUR_16KR 0x06 // 16k Ohm resistor on all the time -#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL #define A_1 0x00 #define A_2 0x01 diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c index c9a871118d..7752a3f6cb 100644 --- a/drivers/led/issi/is31fl3736.c +++ b/drivers/led/issi/is31fl3736.c @@ -36,16 +36,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 - -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 + +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h index 9fbe1cc577..f126034615 100644 --- a/drivers/led/issi/is31fl3736.h +++ b/drivers/led/issi/is31fl3736.h @@ -61,14 +61,14 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled); void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x01 // 0.5k Ohm resistor -#define PUR_1KR 0x02 // 1.0k Ohm resistor -#define PUR_2KR 0x03 // 2.0k Ohm resistor -#define PUR_4KR 0x04 // 4.0k Ohm resistor -#define PUR_8KR 0x05 // 8.0k Ohm resistor -#define PUR_16KR 0x06 // 16k Ohm resistor -#define PUR_32KR 0x07 // 32k Ohm resistor +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor #define A_1 0x00 #define A_2 0x02 diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index 0722e18869..9f2a13de45 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -38,16 +38,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 - -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 + +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h index 31b1a22267..ddb70a9df5 100644 --- a/drivers/led/issi/is31fl3737.h +++ b/drivers/led/issi/is31fl3737.h @@ -48,14 +48,14 @@ void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL -#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL -#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL -#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL -#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL -#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL -#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL +#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL +#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL +#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL +#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL +#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL #define A_1 0x00 #define A_2 0x01 diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c index 8d347a5e60..393b0179b5 100644 --- a/drivers/led/issi/is31fl3741.c +++ b/drivers/led/issi/is31fl3741.c @@ -42,16 +42,16 @@ #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 #define ISSI_IDREGISTER 0xFC -#define ISSI_PAGE_PWM0 0x00 // PG0 -#define ISSI_PAGE_PWM1 0x01 // PG1 -#define ISSI_PAGE_SCALING_0 0x02 // PG2 -#define ISSI_PAGE_SCALING_1 0x03 // PG3 -#define ISSI_PAGE_FUNCTION 0x04 // PG4 - -#define ISSI_REG_CONFIGURATION 0x00 // PG4 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG4 -#define ISSI_REG_PULLDOWNUP 0x02 // PG4 -#define ISSI_REG_RESET 0x3F // PG4 +#define ISSI_PAGE_PWM0 0x00 // PG0 +#define ISSI_PAGE_PWM1 0x01 // PG1 +#define ISSI_PAGE_SCALING_0 0x02 // PG2 +#define ISSI_PAGE_SCALING_1 0x03 // PG3 +#define ISSI_PAGE_FUNCTION 0x04 // PG4 + +#define ISSI_REG_CONFIGURATION 0x00 // PG4 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG4 +#define ISSI_REG_PULLDOWNUP 0x02 // PG4 +#define ISSI_REG_RESET 0x3F // PG4 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h index 8154f8be70..3bdb23bd2d 100644 --- a/drivers/led/issi/is31fl3741.h +++ b/drivers/led/issi/is31fl3741.h @@ -51,14 +51,14 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x01 // 0.5k Ohm resistor -#define PUR_1KR 0x02 // 1.0k Ohm resistor -#define PUR_2KR 0x03 // 2.0k Ohm resistor -#define PUR_4KR 0x04 // 4.0k Ohm resistor -#define PUR_8KR 0x05 // 8.0k Ohm resistor -#define PUR_16KR 0x06 // 16k Ohm resistor -#define PUR_32KR 0x07 // 32k Ohm resistor +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor #define CS1_SW1 0x00 #define CS2_SW1 0x01 diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index 3b56d370dc..918b837f07 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -34,16 +34,16 @@ along with this program. If not, see . # define OLED_DISPLAY_HEIGHT 64 # endif # ifndef OLED_MATRIX_SIZE -# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed) +# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed) # endif # ifndef OLED_BLOCK_TYPE # define OLED_BLOCK_TYPE uint16_t # endif # ifndef OLED_BLOCK_COUNT -# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed) +# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed) # endif # ifndef OLED_BLOCK_SIZE -# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) +# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) # endif # ifndef OLED_COM_PINS # define OLED_COM_PINS COM_PINS_ALT @@ -68,7 +68,7 @@ along with this program. If not, see . // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 } // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 } -#else // defined(OLED_DISPLAY_128X64) +#else // defined(OLED_DISPLAY_128X64) // Default 128x32 # ifndef OLED_DISPLAY_WIDTH # define OLED_DISPLAY_WIDTH 128 @@ -77,16 +77,16 @@ along with this program. If not, see . # define OLED_DISPLAY_HEIGHT 32 # endif # ifndef OLED_MATRIX_SIZE -# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) +# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) # endif # ifndef OLED_BLOCK_TYPE -# define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only +# define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only # endif # ifndef OLED_BLOCK_COUNT -# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) +# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed) # endif # ifndef OLED_BLOCK_SIZE -# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) +# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) # endif # ifndef OLED_COM_PINS # define OLED_COM_PINS COM_PINS_SEQ @@ -105,7 +105,7 @@ along with this program. If not, see . // If OLED_BLOCK_TYPE is uint8_t, these tables would look like: // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 } // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 } -#endif // defined(OLED_DISPLAY_CUSTOM) +#endif // defined(OLED_DISPLAY_CUSTOM) #if !defined(OLED_IC) # define OLED_IC OLED_IC_SSD1306 @@ -180,7 +180,7 @@ typedef enum { OLED_ROTATION_0 = 0, OLED_ROTATION_90 = 1, OLED_ROTATION_180 = 2, - OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180 + OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180 } oled_rotation_t; // Initialize the oled display, rotating the rendered output based on the define passed in. @@ -262,7 +262,7 @@ void oled_write_raw_P(const char *data, uint16_t size); # define oled_write_P(data, invert) oled_write(data, invert) # define oled_write_ln_P(data, invert) oled_write(data, invert) # define oled_write_raw_P(data, size) oled_write_raw(data, size) -#endif // defined(__AVR__) +#endif // defined(__AVR__) // Can be used to manually turn on the screen if it is off // Returns true if the screen was on or turns on diff --git a/drivers/oled/ssd1306_sh1106.c b/drivers/oled/ssd1306_sh1106.c index d9bd3c14bd..30cfeb5648 100644 --- a/drivers/oled/ssd1306_sh1106.c +++ b/drivers/oled/ssd1306_sh1106.c @@ -53,7 +53,7 @@ along with this program. If not, see . #define PAGE_ADDR 0x22 #define PAM_SETCOLUMN_LSB 0x00 #define PAM_SETCOLUMN_MSB 0x10 -#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 +#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 // Hardware Configuration Commands #define DISPLAY_START_LINE 0x40 @@ -97,9 +97,9 @@ along with this program. If not, see . #define I2C_DATA 0x40 #if defined(__AVR__) # define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT) -#else // defined(__AVR__) +#else // defined(__AVR__) # define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT) -#endif // defined(__AVR__) +#endif // defined(__AVR__) #define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT) #define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, OLED_I2C_TIMEOUT) @@ -119,7 +119,7 @@ bool oled_inverted = false; uint8_t oled_brightness = OLED_BRIGHTNESS; oled_rotation_t oled_rotation = 0; uint8_t oled_rotation_width = 0; -uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values +uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values uint8_t oled_scroll_start = 0; uint8_t oled_scroll_end = 7; #if OLED_TIMEOUT > 0 @@ -190,7 +190,7 @@ bool oled_init(oled_rotation_t rotation) { #if (OLED_IC != OLED_IC_SH1106) // MEMORY_MODE is unsupported on SH1106 (Page Addressing only) MEMORY_MODE, - 0x00, // Horizontal addressing mode + 0x00, // Horizontal addressing mode #endif }; if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) { @@ -232,8 +232,12 @@ bool oled_init(oled_rotation_t rotation) { return true; } -__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return rotation; } -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } +__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return rotation; +} +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return rotation; +} void oled_clear(void) { memset(oled_buffer, 0, sizeof(oled_buffer)); @@ -306,9 +310,9 @@ void oled_render(void) { // Set column & page position static uint8_t display_start[] = {I2C_CMD, COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1}; if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { - calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start + calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start } else { - calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start + calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start } // Send column & page position @@ -368,7 +372,8 @@ void oled_advance_page(bool clearPageRemainder) { remaining = remaining / OLED_FONT_WIDTH; // Write empty character until next line - while (remaining--) oled_write_char(' ', false); + while (remaining--) + oled_write_char(' ', false); } else { // Next page index out of bounds? if (index + remaining >= OLED_MATRIX_SIZE) { @@ -419,7 +424,7 @@ void oled_write_char(const char data, bool invert) { _Static_assert(sizeof(font) >= ((OLED_FONT_END + 1 - OLED_FONT_START) * OLED_FONT_WIDTH), "OLED_FONT_END references outside array"); // set the reder buffer data - uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index + uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) { memset(oled_cursor, 0x00, OLED_FONT_WIDTH); } else { @@ -545,7 +550,7 @@ void oled_write_raw_P(const char *data, uint16_t size) { oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE)); } } -#endif // defined(__AVR__) +#endif // defined(__AVR__) bool oled_on(void) { if (!oled_initialized) { @@ -595,7 +600,9 @@ bool oled_off(void) { return !oled_active; } -bool is_oled_on(void) { return oled_active; } +bool is_oled_on(void) { + return oled_active; +} uint8_t oled_set_brightness(uint8_t level) { if (!oled_initialized) { @@ -613,7 +620,9 @@ uint8_t oled_set_brightness(uint8_t level) { return oled_brightness; } -uint8_t oled_get_brightness(void) { return oled_brightness; } +uint8_t oled_get_brightness(void) { + return oled_brightness; +} // Set the specific 8 lines rows of the screen to scroll. // 0 is the default for start, and 7 for end, which is the entire @@ -693,7 +702,9 @@ bool oled_scroll_off(void) { return !oled_scrolling; } -bool is_oled_scrolling(void) { return oled_scrolling; } +bool is_oled_scrolling(void) { + return oled_scrolling; +} bool oled_invert(bool invert) { if (!oled_initialized) { @@ -777,5 +788,9 @@ void oled_task(void) { #endif } -__attribute__((weak)) bool oled_task_kb(void) { return oled_task_user(); } -__attribute__((weak)) bool oled_task_user(void) { return true; } +__attribute__((weak)) bool oled_task_kb(void) { + return oled_task_user(); +} +__attribute__((weak)) bool oled_task_user(void) { + return true; +} diff --git a/drivers/ps2/ps2_busywait.c b/drivers/ps2/ps2_busywait.c index 983194eea8..c5a0183bb7 100644 --- a/drivers/ps2/ps2_busywait.c +++ b/drivers/ps2/ps2_busywait.c @@ -71,12 +71,12 @@ uint8_t ps2_host_send(uint8_t data) { /* terminate a transmission if we have */ inhibit(); - wait_us(100); // 100us [4]p.13, [5]p.50 + wait_us(100); // 100us [4]p.13, [5]p.50 /* 'Request to Send' and Start bit */ data_lo(); clock_hi(); - WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 + WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 /* Data bit */ for (uint8_t i = 0; i < 8; i++) { @@ -143,7 +143,7 @@ uint8_t ps2_host_recv(void) { idle(); /* start bit [1] */ - WAIT(clock_lo, 100, 1); // TODO: this is enough? + WAIT(clock_lo, 100, 1); // TODO: this is enough? WAIT(data_lo, 1, 2); WAIT(clock_hi, 50, 3); diff --git a/drivers/ps2/ps2_interrupt.c b/drivers/ps2/ps2_interrupt.c index 70debd02f7..c49b4f8b75 100644 --- a/drivers/ps2/ps2_interrupt.c +++ b/drivers/ps2/ps2_interrupt.c @@ -43,7 +43,7 @@ POSSIBILITY OF SUCH DAMAGE. #if defined(__AVR__) # include -#elif defined(PROTOCOL_CHIBIOS) // TODO: or STM32 ? +#elif defined(PROTOCOL_CHIBIOS) // TODO: or STM32 ? // chibiOS headers # include "ch.h" # include "hal.h" @@ -71,7 +71,9 @@ static inline void pbuf_clear(void); #if defined(PROTOCOL_CHIBIOS) void ps2_interrupt_service_routine(void); -void palCallback(void *arg) { ps2_interrupt_service_routine(); } +void palCallback(void *arg) { + ps2_interrupt_service_routine(); +} # define PS2_INT_INIT() \ { palSetLineMode(PS2_CLOCK_PIN, PAL_MODE_INPUT); } \ @@ -85,7 +87,7 @@ void palCallback(void *arg) { ps2_interrupt_service_routine(); } # define PS2_INT_OFF() \ { palDisableLineEvent(PS2_CLOCK_PIN); } \ while (0) -#endif // PROTOCOL_CHIBIOS +#endif // PROTOCOL_CHIBIOS void ps2_host_init(void) { idle(); @@ -103,12 +105,12 @@ uint8_t ps2_host_send(uint8_t data) { /* terminate a transmission if we have */ inhibit(); - wait_us(100); // 100us [4]p.13, [5]p.50 + wait_us(100); // 100us [4]p.13, [5]p.50 /* 'Request to Send' and Start bit */ data_lo(); clock_hi(); - WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 + WAIT(clock_lo, 10000, 10); // 10ms [5]p.50 /* Data bit[2-9] */ for (uint8_t i = 0; i < 8; i++) { @@ -244,7 +246,9 @@ RETURN: } #if defined(__AVR__) -ISR(PS2_INT_VECT) { ps2_interrupt_service_routine(); } +ISR(PS2_INT_VECT) { + ps2_interrupt_service_routine(); +} #endif /* send LED state to keyboard */ diff --git a/drivers/ps2/ps2_mouse.c b/drivers/ps2/ps2_mouse.c index 8a6668b410..ccb0a929ae 100644 --- a/drivers/ps2/ps2_mouse.c +++ b/drivers/ps2/ps2_mouse.c @@ -42,7 +42,7 @@ static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report); void ps2_mouse_init(void) { ps2_host_init(); - wait_ms(PS2_MOUSE_INIT_DELAY); // wait for powering up + wait_ms(PS2_MOUSE_INIT_DELAY); // wait for powering up PS2_MOUSE_SEND(PS2_MOUSE_RESET, "ps2_mouse_init: sending reset"); @@ -113,9 +113,13 @@ void ps2_mouse_task(void) { ps2_mouse_clear_report(&mouse_report); } -void ps2_mouse_disable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_DISABLE_DATA_REPORTING, "ps2 mouse disable data reporting"); } +void ps2_mouse_disable_data_reporting(void) { + PS2_MOUSE_SEND(PS2_MOUSE_DISABLE_DATA_REPORTING, "ps2 mouse disable data reporting"); +} -void ps2_mouse_enable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_ENABLE_DATA_REPORTING, "ps2 mouse enable data reporting"); } +void ps2_mouse_enable_data_reporting(void) { + PS2_MOUSE_SEND(PS2_MOUSE_ENABLE_DATA_REPORTING, "ps2 mouse enable data reporting"); +} void ps2_mouse_set_remote_mode(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_REMOTE_MODE, "ps2 mouse set remote mode"); @@ -127,13 +131,21 @@ void ps2_mouse_set_stream_mode(void) { ps2_mouse_mode = PS2_MOUSE_STREAM_MODE; } -void ps2_mouse_set_scaling_2_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_2_1, "ps2 mouse set scaling 2:1"); } +void ps2_mouse_set_scaling_2_1(void) { + PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_2_1, "ps2 mouse set scaling 2:1"); +} -void ps2_mouse_set_scaling_1_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_1_1, "ps2 mouse set scaling 1:1"); } +void ps2_mouse_set_scaling_1_1(void) { + PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_1_1, "ps2 mouse set scaling 1:1"); +} -void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_RESOLUTION, resolution, "ps2 mouse set resolution"); } +void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution) { + PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_RESOLUTION, resolution, "ps2 mouse set resolution"); +} -void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_SAMPLE_RATE, sample_rate, "ps2 mouse set sample rate"); } +void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate) { + PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_SAMPLE_RATE, sample_rate, "ps2 mouse set sample rate"); +} /* ============================= HELPERS ============================ */ @@ -165,7 +177,7 @@ static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report) #ifdef PS2_MOUSE_INVERT_X mouse_report->x = -mouse_report->x; #endif -#ifndef PS2_MOUSE_INVERT_Y // NOTE if not! +#ifndef PS2_MOUSE_INVERT_Y // NOTE if not! // invert coordinate of y to conform to USB HID mouse mouse_report->y = -mouse_report->y; #endif diff --git a/drivers/sensors/adns5050.c b/drivers/sensors/adns5050.c index c23d24d5af..b76268fba2 100644 --- a/drivers/sensors/adns5050.c +++ b/drivers/sensors/adns5050.c @@ -74,9 +74,13 @@ void adns5050_sync(void) { writePinHigh(ADNS5050_CS_PIN); } -void adns5050_cs_select(void) { writePinLow(ADNS5050_CS_PIN); } +void adns5050_cs_select(void) { + writePinLow(ADNS5050_CS_PIN); +} -void adns5050_cs_deselect(void) { writePinHigh(ADNS5050_CS_PIN); } +void adns5050_cs_deselect(void) { + writePinHigh(ADNS5050_CS_PIN); +} uint8_t adns5050_serial_read(void) { setPinInput(ADNS5050_SDIO_PIN); @@ -190,7 +194,7 @@ int8_t convert_twoscomp(uint8_t data) { // Don't forget to use the definitions for CPI in the header file. void adns5050_set_cpi(uint16_t cpi) { - uint8_t cpival = constrain((cpi / 125), 0x1, 0xD); // limits to 0--119 + uint8_t cpival = constrain((cpi / 125), 0x1, 0xD); // limits to 0--119 adns5050_write_reg(REG_MOUSE_CONTROL2, 0b10000 | cpival); } diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index d167841968..3633f23e52 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -77,7 +77,9 @@ #define MSB1 0x80 // clang-format on -void adns9800_spi_start(void) { spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR); } +void adns9800_spi_start(void) { + spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR); +} void adns9800_write(uint8_t reg_addr, uint8_t data) { adns9800_spi_start(); diff --git a/drivers/sensors/analog_joystick.c b/drivers/sensors/analog_joystick.c index 1666bed047..95f8cff23a 100644 --- a/drivers/sensors/analog_joystick.c +++ b/drivers/sensors/analog_joystick.c @@ -24,7 +24,7 @@ uint16_t minAxisValue = ANALOG_JOYSTICK_AXIS_MIN; uint16_t maxAxisValue = ANALOG_JOYSTICK_AXIS_MAX; uint8_t maxCursorSpeed = ANALOG_JOYSTICK_SPEED_MAX; -uint8_t speedRegulator = ANALOG_JOYSTICK_SPEED_REGULATOR; // Lower Values Create Faster Movement +uint8_t speedRegulator = ANALOG_JOYSTICK_SPEED_REGULATOR; // Lower Values Create Faster Movement int16_t xOrigin, yOrigin; diff --git a/drivers/sensors/cirque_pinnacle.c b/drivers/sensors/cirque_pinnacle.c index b807c4f076..2db7f916fe 100644 --- a/drivers/sensors/cirque_pinnacle.c +++ b/drivers/sensors/cirque_pinnacle.c @@ -54,7 +54,9 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count); void RAP_Write(uint8_t address, uint8_t data); #ifdef CONSOLE_ENABLE -void print_byte(uint8_t byte) { xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); } +void print_byte(uint8_t byte) { + xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); +} #endif /* Logical Scaling Functions */ @@ -73,8 +75,12 @@ void ClipCoordinates(pinnacle_data_t* coordinates) { } } -uint16_t cirque_pinnacle_get_scale(void) { return scale_data; } -void cirque_pinnacle_set_scale(uint16_t scale) { scale_data = scale; } +uint16_t cirque_pinnacle_get_scale(void) { + return scale_data; +} +void cirque_pinnacle_set_scale(uint16_t scale) { + scale_data = scale; +} // Scales data to desired X & Y resolution void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution) { @@ -105,13 +111,13 @@ void cirque_pinnacle_clear_flags() { void cirque_pinnacle_enable_feed(bool feedEnable) { uint8_t temp; - RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register + RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register if (feedEnable) { - temp |= 0x01; // Set Feed Enable bit + temp |= 0x01; // Set Feed Enable bit RAP_Write(0x04, temp); } else { - temp &= ~0x01; // Clear Feed Enable bit + temp &= ~0x01; // Clear Feed Enable bit RAP_Write(0x04, temp); } } @@ -122,13 +128,13 @@ void cirque_pinnacle_enable_feed(bool feedEnable) { void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) { uint8_t ERAControlValue = 0xFF; - cirque_pinnacle_enable_feed(false); // Disable feed + cirque_pinnacle_enable_feed(false); // Disable feed - RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Send upper byte of ERA address - RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address + RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Send upper byte of ERA address + RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address for (uint16_t i = 0; i < count; i++) { - RAP_Write(ERA_CONTROL, 0x05); // Signal ERA-read (auto-increment) to Pinnacle + RAP_Write(ERA_CONTROL, 0x05); // Signal ERA-read (auto-increment) to Pinnacle // Wait for status register 0x1E to clear do { @@ -145,14 +151,14 @@ void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) { void ERA_WriteByte(uint16_t address, uint8_t data) { uint8_t ERAControlValue = 0xFF; - cirque_pinnacle_enable_feed(false); // Disable feed + cirque_pinnacle_enable_feed(false); // Disable feed - RAP_Write(ERA_VALUE, data); // Send data byte to be written + RAP_Write(ERA_VALUE, data); // Send data byte to be written - RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Upper byte of ERA address - RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address + RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Upper byte of ERA address + RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address - RAP_Write(ERA_CONTROL, 0x02); // Signal an ERA-write to Pinnacle + RAP_Write(ERA_CONTROL, 0x02); // Signal an ERA-write to Pinnacle // Wait for status register 0x1E to clear do { @@ -166,7 +172,7 @@ void cirque_pinnacle_set_adc_attenuation(uint8_t adcGain) { uint8_t temp = 0x00; ERA_ReadBytes(0x0187, &temp, 1); - temp &= 0x3F; // clear top two bits + temp &= 0x3F; // clear top two bits temp |= adcGain; ERA_WriteByte(0x0187, temp); ERA_ReadBytes(0x0187, &temp, 1); diff --git a/drivers/sensors/cirque_pinnacle.h b/drivers/sensors/cirque_pinnacle.h index db891122a6..c8cb360e03 100644 --- a/drivers/sensors/cirque_pinnacle.h +++ b/drivers/sensors/cirque_pinnacle.h @@ -26,16 +26,16 @@ void cirque_pinnacle_set_scale(uint16_t scale); // Coordinate scaling values #ifndef CIRQUE_PINNACLE_X_LOWER -# define CIRQUE_PINNACLE_X_LOWER 127 // min "reachable" X value +# define CIRQUE_PINNACLE_X_LOWER 127 // min "reachable" X value #endif #ifndef CIRQUE_PINNACLE_X_UPPER -# define CIRQUE_PINNACLE_X_UPPER 1919 // max "reachable" X value +# define CIRQUE_PINNACLE_X_UPPER 1919 // max "reachable" X value #endif #ifndef CIRQUE_PINNACLE_Y_LOWER -# define CIRQUE_PINNACLE_Y_LOWER 63 // min "reachable" Y value +# define CIRQUE_PINNACLE_Y_LOWER 63 // min "reachable" Y value #endif #ifndef CIRQUE_PINNACLE_Y_UPPER -# define CIRQUE_PINNACLE_Y_UPPER 1471 // max "reachable" Y value +# define CIRQUE_PINNACLE_Y_UPPER 1471 // max "reachable" Y value #endif #ifndef CIRQUE_PINNACLE_X_RANGE # define CIRQUE_PINNACLE_X_RANGE (CIRQUE_PINNACLE_X_UPPER - CIRQUE_PINNACLE_X_LOWER) diff --git a/drivers/sensors/cirque_pinnacle_i2c.c b/drivers/sensors/cirque_pinnacle_i2c.c index 81dd982b0c..8a38f1dcea 100644 --- a/drivers/sensors/cirque_pinnacle_i2c.c +++ b/drivers/sensors/cirque_pinnacle_i2c.c @@ -14,7 +14,7 @@ extern bool touchpad_init; /* RAP Functions */ // Reads Pinnacle registers starting at
void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) { - uint8_t cmdByte = READ_MASK | address; // Form the READ command byte + uint8_t cmdByte = READ_MASK | address; // Form the READ command byte if (touchpad_init) { i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, NULL, 0, CIRQUE_PINNACLE_TIMEOUT); if (i2c_readReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, data, count, CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) { @@ -29,7 +29,7 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) { // Writes single-byte to
void RAP_Write(uint8_t address, uint8_t data) { - uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte + uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte if (touchpad_init) { if (i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, &data, sizeof(data), CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) { diff --git a/drivers/sensors/cirque_pinnacle_spi.c b/drivers/sensors/cirque_pinnacle_spi.c index ed40abd9fa..e00e73eb8c 100644 --- a/drivers/sensors/cirque_pinnacle_spi.c +++ b/drivers/sensors/cirque_pinnacle_spi.c @@ -13,14 +13,14 @@ extern bool touchpad_init; /* RAP Functions */ // Reads Pinnacle registers starting at
void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) { - uint8_t cmdByte = READ_MASK | address; // Form the READ command byte + uint8_t cmdByte = READ_MASK | address; // Form the READ command byte if (touchpad_init) { if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_PINNACLE_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) { spi_write(cmdByte); - spi_read(); // filler - spi_read(); // filler + spi_read(); // filler + spi_read(); // filler for (uint8_t i = 0; i < count; i++) { - data[i] = spi_read(); // each sepsequent read gets another register's contents + data[i] = spi_read(); // each sepsequent read gets another register's contents } } else { #ifdef CONSOLE_ENABLE @@ -34,7 +34,7 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) { // Writes single-byte to
void RAP_Write(uint8_t address, uint8_t data) { - uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte + uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte if (touchpad_init) { if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_PINNACLE_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) { diff --git a/drivers/sensors/pimoroni_trackball.c b/drivers/sensors/pimoroni_trackball.c index 2867e763bc..333e017a06 100644 --- a/drivers/sensors/pimoroni_trackball.c +++ b/drivers/sensors/pimoroni_trackball.c @@ -33,7 +33,9 @@ static uint16_t precision = 128; -uint16_t pimoroni_trackball_get_cpi(void) { return (precision * 125); } +uint16_t pimoroni_trackball_get_cpi(void) { + return (precision * 125); +} /** * @brief Sets the scaling value for pimoroni trackball * diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 8d1b08e22b..8c977be1c8 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -86,7 +86,9 @@ bool _inBurst = false; #ifdef CONSOLE_ENABLE -void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); } +void print_byte(uint8_t byte) { + dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); +} #endif #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) @@ -144,7 +146,7 @@ bool pmw3360_init(void) { pmw3360_spi_start(); spi_stop(); - pmw3360_write(REG_Shutdown, 0xb6); // Shutdown first + pmw3360_write(REG_Shutdown, 0xb6); // Shutdown first wait_ms(300); pmw3360_spi_start(); @@ -222,7 +224,7 @@ bool pmw3360_check_signature(void) { uint8_t pid = pmw3360_read(REG_Product_ID); uint8_t iv_pid = pmw3360_read(REG_Inverse_Product_ID); uint8_t SROM_ver = pmw3360_read(REG_SROM_ID); - return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04 + return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04 } uint16_t pmw3360_get_cpi(void) { @@ -248,17 +250,17 @@ report_pmw3360_t pmw3360_read_burst(void) { pmw3360_spi_start(); spi_write(REG_Motion_Burst); - wait_us(35); // waits for tSRAD_MOTBR + wait_us(35); // waits for tSRAD_MOTBR report.motion = spi_read(); - spi_read(); // skip Observation + spi_read(); // skip Observation // delta registers report.dx = spi_read(); report.mdx = spi_read(); report.dy = spi_read(); report.mdy = spi_read(); - if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird. + if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird. _inBurst = false; } diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 4e17aa0c46..eec7295871 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -58,11 +58,11 @@ typedef struct { int8_t motion; - bool isMotion; // True if a motion is detected. - bool isOnSurface; // True when a chip is on a surface - int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value) + bool isMotion; // True if a motion is detected. + bool isOnSurface; // True when a chip is on a surface + int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value) int8_t mdx; - int16_t dy; // displacement on y directions. + int16_t dy; // displacement on y directions. int8_t mdy; } report_pmw3360_t; diff --git a/drivers/sensors/pmw3389.c b/drivers/sensors/pmw3389.c index 963925bd38..828dafa134 100644 --- a/drivers/sensors/pmw3389.c +++ b/drivers/sensors/pmw3389.c @@ -90,7 +90,9 @@ bool _inBurst = false; #ifdef CONSOLE_ENABLE -void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); } +void print_byte(uint8_t byte) { + dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); +} #endif #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) @@ -148,7 +150,7 @@ bool pmw3389_init(void) { pmw3389_spi_start(); spi_stop(); - pmw3389_write(REG_Shutdown, 0xb6); // Shutdown first + pmw3389_write(REG_Shutdown, 0xb6); // Shutdown first wait_ms(300); pmw3389_spi_start(); @@ -226,7 +228,7 @@ bool pmw3389_check_signature(void) { uint8_t pid = pmw3389_read(REG_Product_ID); uint8_t iv_pid = pmw3389_read(REG_Inverse_Product_ID); uint8_t SROM_ver = pmw3389_read(REG_SROM_ID); - return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04 + return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04 } uint16_t pmw3389_get_cpi(void) { @@ -254,17 +256,17 @@ report_pmw3389_t pmw3389_read_burst(void) { pmw3389_spi_start(); spi_write(REG_Motion_Burst); - wait_us(35); // waits for tSRAD_MOTBR + wait_us(35); // waits for tSRAD_MOTBR report.motion = spi_read(); - spi_read(); // skip Observation + spi_read(); // skip Observation // delta registers report.dx = spi_read(); report.mdx = spi_read(); report.dy = spi_read(); report.mdy = spi_read(); - if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird. + if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird. _inBurst = false; } diff --git a/drivers/sensors/pmw3389.h b/drivers/sensors/pmw3389.h index a7c95e6076..db4a763fe3 100644 --- a/drivers/sensors/pmw3389.h +++ b/drivers/sensors/pmw3389.h @@ -59,11 +59,11 @@ typedef struct { int8_t motion; - bool isMotion; // True if a motion is detected. - bool isOnSurface; // True when a chip is on a surface - int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value) + bool isMotion; // True if a motion is detected. + bool isOnSurface; // True when a chip is on a surface + int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value) int8_t mdx; - int16_t dy; // displacement on y directions. + int16_t dy; // displacement on y directions. int8_t mdy; } report_pmw3389_t; diff --git a/drivers/usb2422.c b/drivers/usb2422.c index 62b919093b..8ee54b24ee 100644 --- a/drivers/usb2422.c +++ b/drivers/usb2422.c @@ -352,7 +352,7 @@ void USB2422_init() { setPinInput(USB2422_ACTIVE_PIN); #endif - i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration + i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration } void USB2422_configure() { @@ -363,14 +363,14 @@ void USB2422_configure() { // configure Usb2422 registers config.VID.reg = USB2422_VENDOR_ID; config.PID.reg = USB2422_PRODUCT_ID; - config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01 - config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now - config.CFG1.bit.HS_DISABLE = 1; // full or high speed + config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01 + config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now + config.CFG1.bit.HS_DISABLE = 1; // full or high speed // config.CFG2.bit.COMPOUND = 0; // compound device - config.CFG3.bit.STRING_EN = 1; // strings enabled + config.CFG3.bit.STRING_EN = 1; // strings enabled // config.NRD.bit.PORT2_NR = 0; // MCU is non-removable - config.MAXPB.reg = 20; // 0mA - config.HCMCB.reg = 20; // 0mA + config.MAXPB.reg = 20; // 0mA + config.HCMCB.reg = 20; // 0mA config.MFRSL.reg = sizeof(USB2422_MANUFACTURER); config.PRDSL.reg = sizeof(USB2422_PRODUCT); config.SERSL.reg = sizeof(SERNAME); diff --git a/drivers/ws2812.h b/drivers/ws2812.h index 945b3d0728..5985b5340c 100644 --- a/drivers/ws2812.h +++ b/drivers/ws2812.h @@ -33,19 +33,19 @@ #endif #ifndef WS2812_T1H -# define WS2812_T1H 900 // Width of a 1 bit in ns +# define WS2812_T1H 900 // Width of a 1 bit in ns #endif #ifndef WS2812_T1L -# define WS2812_T1L (WS2812_TIMING - WS2812_T1H) // Width of a 1 bit in ns +# define WS2812_T1L (WS2812_TIMING - WS2812_T1H) // Width of a 1 bit in ns #endif #ifndef WS2812_T0H -# define WS2812_T0H 350 // Width of a 0 bit in ns +# define WS2812_T0H 350 // Width of a 0 bit in ns #endif #ifndef WS2812_T0L -# define WS2812_T0L (WS2812_TIMING - WS2812_T0H) // Width of a 0 bit in ns +# define WS2812_T0L (WS2812_TIMING - WS2812_T0H) // Width of a 0 bit in ns #endif /* -- cgit v1.2.3