From 7d685956cc616a8d76aa7866f42bf569a9ca3fca Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 31 Jan 2022 04:29:42 +1100 Subject: Rename `AdafruitBLE` to `BluefruitLE` (#16127) --- docs/feature_bluetooth.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'docs/feature_bluetooth.md') diff --git a/docs/feature_bluetooth.md b/docs/feature_bluetooth.md index f6fb02d948..d4ed494053 100644 --- a/docs/feature_bluetooth.md +++ b/docs/feature_bluetooth.md @@ -7,7 +7,7 @@ Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QM |Board |Bluetooth Protocol |Connection Type|rules.mk |Bluetooth Chip| |----------------------------------------------------------------|--------------------|---------------|--------------------------------|--------------| |Roving Networks RN-42 (Sparkfun Bluesmirf) |Bluetooth Classic |UART |`BLUETOOTH_DRIVER = RN42` |RN-42 | -|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy|SPI |`BLUETOOTH_DRIVER = AdafruitBLE`|nRF51822 | +|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy|SPI |`BLUETOOTH_DRIVER = BluefruitLE`|nRF51822 | Not Supported Yet but possible: * [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514) @@ -17,9 +17,9 @@ Not Supported Yet but possible: ### Adafruit BLE SPI Friend Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF51822 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines: -* `#define ADAFRUIT_BLE_RST_PIN D4` -* `#define ADAFRUIT_BLE_CS_PIN B4` -* `#define ADAFRUIT_BLE_IRQ_PIN E6` +* `#define BLUEFRUIT_LE_RST_PIN D4` +* `#define BLUEFRUIT_LE_CS_PIN B4` +* `#define BLUEFRUIT_LE_IRQ_PIN E6` A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip. @@ -32,7 +32,7 @@ Add the following to your `rules.mk`: ```make BLUETOOTH_ENABLE = yes -BLUETOOTH_DRIVER = AdafruitBLE # or RN42 +BLUETOOTH_DRIVER = BluefruitLE # or RN42 ``` ## Bluetooth Keycodes -- cgit v1.2.3