From 01f31bf28ebcb5721229697c93dc6e0b2d5b66d7 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 15 Sep 2022 01:03:55 +0100 Subject: [Docs] RESET -> QK_BOOT (#18365) --- docs/driver_installation_zadig.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'docs/driver_installation_zadig.md') diff --git a/docs/driver_installation_zadig.md b/docs/driver_installation_zadig.md index 003629ba9a..3b2c0b74dc 100644 --- a/docs/driver_installation_zadig.md +++ b/docs/driver_installation_zadig.md @@ -8,7 +8,7 @@ We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have ## Installation -Put your keyboard into bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic Lite](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in. +Put your keyboard into bootloader mode, either by hitting the `QK_BOOT` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic Lite](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in. Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic Lite](feature_bootmagic.md) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure. To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button. -- cgit v1.2.3