From d3f23ecfbcd2a69714422ab68f346e51fcc2a6de Mon Sep 17 00:00:00 2001 From: Florian Didron Date: Tue, 21 Jan 2020 13:50:53 +0900 Subject: Apollo (#246) * Add External EEPROM driver * Add keyboard * Fix i2c address * Revert i2c address for eeprom * Reduce page size for 24LC128 * Disable External EEPROM for now * Fix up RGB Matrix and layout * Cleanup moonlander.c file * Fix led array center * Disable External EEPROM for now * Cleanup and optimization of files * Add and clean up mappings * Enable "ZSA" defaults for Moonlander * Update matrix to use i2c_readReg * Disable render limit for rgb matrix * Update pin controls to GPIO Commands * Add proper changed mechanism * Additional cleanup * Run clang-format on moonlander files * Align keymap * Limit brightness for rgb matrix to 200 To prevent power draw issues * Add USB-IF VID/PID * Add RGB Matrix Sleep code * Enable External EEPROM on Moonlander * Port over Ergodox Expander error handling and retry code * Re-init RGB Matrix drivers when half is reconnected * Add threaded LED display * Correct layer state settings after moonlander_led_task * Update Moonlander to include Oryx configuration * Add webUSB Stuff * Update default keymap * fix: merge conflict Co-authored-by: Drashna Jaelre --- common_features.mk | 51 ++++ drivers/arm/i2c_master.c | 4 + drivers/eeprom/eeprom_driver.c | 73 +++++ drivers/eeprom/eeprom_driver.h | 22 ++ drivers/eeprom/eeprom_i2c.c | 120 ++++++++ drivers/eeprom/eeprom_i2c.h | 115 +++++++ drivers/eeprom/eeprom_transient.c | 52 ++++ drivers/eeprom/eeprom_transient.h | 24 ++ keyboards/moonlander/config.h | 114 +++++++ keyboards/moonlander/keymaps/default/config.h | 3 + keyboards/moonlander/keymaps/default/keymap.c | 79 +++++ keyboards/moonlander/keymaps/webusb/config.h | 3 + keyboards/moonlander/keymaps/webusb/keymap.c | 1 + keyboards/moonlander/keymaps/webusb/rules.mk | 4 + keyboards/moonlander/matrix.c | 262 ++++++++++++++++ keyboards/moonlander/moonlander.c | 425 ++++++++++++++++++++++++++ keyboards/moonlander/moonlander.h | 71 +++++ keyboards/moonlander/rules.mk | 24 ++ quantum/audio/audio_arm.c | 2 +- quantum/rgblight.c | 8 +- tmk_core/common.mk | 30 +- tmk_core/common/arm_atsam/eeprom.c | 6 +- tmk_core/common/chibios/eeprom_stm32.c | 6 +- tmk_core/common/chibios/eeprom_teensy.c | 8 +- tmk_core/common/eeconfig.c | 11 + tmk_core/common/eeprom.h | 9 +- tmk_core/common/test/eeprom.c | 6 +- 27 files changed, 1485 insertions(+), 48 deletions(-) create mode 100644 drivers/eeprom/eeprom_driver.c create mode 100644 drivers/eeprom/eeprom_driver.h create mode 100644 drivers/eeprom/eeprom_i2c.c create mode 100644 drivers/eeprom/eeprom_i2c.h create mode 100644 drivers/eeprom/eeprom_transient.c create mode 100644 drivers/eeprom/eeprom_transient.h create mode 100644 keyboards/moonlander/config.h create mode 100644 keyboards/moonlander/keymaps/default/config.h create mode 100644 keyboards/moonlander/keymaps/default/keymap.c create mode 100644 keyboards/moonlander/keymaps/webusb/config.h create mode 100644 keyboards/moonlander/keymaps/webusb/keymap.c create mode 100644 keyboards/moonlander/keymaps/webusb/rules.mk create mode 100644 keyboards/moonlander/matrix.c create mode 100644 keyboards/moonlander/moonlander.c create mode 100644 keyboards/moonlander/moonlander.h create mode 100644 keyboards/moonlander/rules.mk diff --git a/common_features.mk b/common_features.mk index b49b76780c..7687521ced 100644 --- a/common_features.mk +++ b/common_features.mk @@ -428,6 +428,57 @@ ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes) OPT_DEFS += -DDIP_SWITCH_ENABLE endif +VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c +EEPROM_DRIVER ?= vendor +ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),) + $(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver) +else + OPT_DEFS += -DEEPROM_ENABLE + ifeq ($(strip $(EEPROM_DRIVER)), custom) + OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM + COMMON_VPATH += $(DRIVER_PATH)/eeprom + SRC += eeprom_driver.c + else ifeq ($(strip $(EEPROM_DRIVER)), i2c) + OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C + COMMON_VPATH += $(DRIVER_PATH)/eeprom + QUANTUM_LIB_SRC += i2c_master.c + SRC += eeprom_driver.c eeprom_i2c.c + else ifeq ($(strip $(EEPROM_DRIVER)), transient) + OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT + COMMON_VPATH += $(DRIVER_PATH)/eeprom + SRC += eeprom_driver.c eeprom_transient.c + else ifeq ($(strip $(EEPROM_DRIVER)), vendor) + OPT_DEFS += -DEEPROM_VENDOR + ifeq ($(PLATFORM),AVR) + # Automatically provided by avr-libc, nothing required + else ifeq ($(PLATFORM),CHIBIOS) + ifeq ($(MCU_SERIES), STM32F3xx) + SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c + SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c + OPT_DEFS += -DEEPROM_EMU_STM32F303xC + OPT_DEFS += -DSTM32_EEPROM_ENABLE + else ifeq ($(MCU_SERIES), STM32F1xx) + SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c + SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c + OPT_DEFS += -DEEPROM_EMU_STM32F103xB + OPT_DEFS += -DSTM32_EEPROM_ENABLE + else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB) + SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c + SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c + OPT_DEFS += -DEEPROM_EMU_STM32F072xB + OPT_DEFS += -DSTM32_EEPROM_ENABLE + else + # This will effectively work the same as "transient" if not supported by the chip + SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c + endif + else ifeq ($(PLATFORM),ARM_ATSAM) + SRC += $(PLATFORM_COMMON_DIR)/eeprom.c + else ifeq ($(PLATFORM),TEST) + SRC += $(PLATFORM_COMMON_DIR)/eeprom.c + endif + endif +endif + ifeq ($(strip $(DYNAMIC_MACRO_ENABLE)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_dynamic_macro.c OPT_DEFS += -DDYNAMIC_MACRO_ENABLE diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index 5a03b9f306..9ced3d2e3e 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -91,6 +91,10 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16 return chibios_to_qmk(&status); } +i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length) { + return i2cMasterTransmitTimeout(&I2C_DRIVER, address/2, tx_body, tx_length, rx_body, rx_length, MS2ST(100)); +} + i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); diff --git a/drivers/eeprom/eeprom_driver.c b/drivers/eeprom/eeprom_driver.c new file mode 100644 index 0000000000..3835e5e9d0 --- /dev/null +++ b/drivers/eeprom/eeprom_driver.c @@ -0,0 +1,73 @@ +/* Copyright 2019 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +#include "eeprom_driver.h" + +uint8_t eeprom_read_byte(const uint8_t *addr) { + uint8_t ret; + eeprom_read_block(&ret, addr, 1); + return ret; +} + +uint16_t eeprom_read_word(const uint16_t *addr) { + uint16_t ret; + eeprom_read_block(&ret, addr, 2); + return ret; +} + +uint32_t eeprom_read_dword(const uint32_t *addr) { + uint32_t ret; + eeprom_read_block(&ret, addr, 4); + return ret; +} + +void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); } + +void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); } + +void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); } + +void eeprom_update_block(const void *buf, void *addr, size_t len) { + uint8_t read_buf[len]; + eeprom_read_block(read_buf, addr, len); + if (memcmp(buf, read_buf, len) != 0) { + eeprom_write_block(buf, addr, len); + } +} + +void eeprom_update_byte(uint8_t *addr, uint8_t value) { + uint8_t orig = eeprom_read_byte(addr); + if (orig != value) { + eeprom_write_byte(addr, value); + } +} + +void eeprom_update_word(uint16_t *addr, uint16_t value) { + uint16_t orig = eeprom_read_word(addr); + if (orig != value) { + eeprom_write_word(addr, value); + } +} + +void eeprom_update_dword(uint32_t *addr, uint32_t value) { + uint32_t orig = eeprom_read_dword(addr); + if (orig != value) { + eeprom_write_dword(addr, value); + } +} diff --git a/drivers/eeprom/eeprom_driver.h b/drivers/eeprom/eeprom_driver.h new file mode 100644 index 0000000000..74592bc8f0 --- /dev/null +++ b/drivers/eeprom/eeprom_driver.h @@ -0,0 +1,22 @@ +/* Copyright 2019 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "eeprom.h" + +void eeprom_driver_init(void); +void eeprom_driver_erase(void); diff --git a/drivers/eeprom/eeprom_i2c.c b/drivers/eeprom/eeprom_i2c.c new file mode 100644 index 0000000000..10bd4a1be1 --- /dev/null +++ b/drivers/eeprom/eeprom_i2c.c @@ -0,0 +1,120 @@ +/* Copyright 2019 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +/* + Note that the implementations of eeprom_XXXX_YYYY on AVR are normally + provided by avr-libc. The same functions are reimplemented below and are + rerouted to the external i2c equivalent. + + Seemingly, as this is compiled from within QMK, the object file generated + during the build overrides the avr-libc implementation during the linking + stage. + + On other platforms such as ARM, there are no provided implementations, so + there is nothing to override during linkage. +*/ + +#include "wait.h" +#include "i2c_master.h" +#include "eeprom.h" +#include "eeprom_i2c.h" + +// #define DEBUG_EEPROM_OUTPUT + +#ifdef DEBUG_EEPROM_OUTPUT +# include "print.h" +#endif // DEBUG_EEPROM_OUTPUT + +static inline void init_i2c_if_required(void) { + static int done = 0; + if (!done) { + i2c_init(); + done = 1; + } +} + +static inline void fill_target_address(uint8_t *buffer, const void *addr) { + intptr_t p = (intptr_t)addr; + for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) { + buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = p & 0xFF; + p >>= 8; + } +} + +void eeprom_driver_init(void) {} + +void eeprom_driver_erase(void) { + uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE]; + memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE); + for (intptr_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) { + eeprom_write_block(buf, (void *)addr, EXTERNAL_EEPROM_PAGE_SIZE); + } +} + +void eeprom_read_block(void *buf, const void *addr, size_t len) { + uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE]; + fill_target_address(complete_packet, addr); + + init_i2c_if_required(); + i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100); + i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), buf, len, 100); + +#ifdef DEBUG_EEPROM_OUTPUT + uprintf("[EEPROM R] 0x%04X: ", ((int)addr)); + for (size_t i = 0; i < len; ++i) { + uprintf(" %02X", (int)(((uint8_t *)buf)[i])); + } + uprintf("\n"); +#endif // DEBUG_EEPROM_OUTPUT +} + +void eeprom_write_block(const void *buf, void *addr, size_t len) { + uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE]; + uint8_t *read_buf = (uint8_t *)buf; + intptr_t target_addr = (intptr_t)addr; + + init_i2c_if_required(); + while (len > 0) { + intptr_t page_offset = target_addr % EXTERNAL_EEPROM_PAGE_SIZE; + int write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset; + if (write_length > len) { + write_length = len; + } + + fill_target_address(complete_packet, (const void *)target_addr); + for (uint8_t i = 0; i < write_length; i++) { + complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + i] = read_buf[i]; + } + +#ifdef DEBUG_EEPROM_OUTPUT + uprintf("[EEPROM W] 0x%04X: ", ((int)target_addr)); + for (uint8_t i = 0; i < write_length; i++) { + uprintf(" %02X", (int)(read_buf[i])); + } + uprintf("\n"); +#endif // DEBUG_EEPROM_OUTPUT + + i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100); + wait_ms(EXTERNAL_EEPROM_WRITE_TIME); + + read_buf += write_length; + target_addr += write_length; + len -= write_length; + } +} diff --git a/drivers/eeprom/eeprom_i2c.h b/drivers/eeprom/eeprom_i2c.h new file mode 100644 index 0000000000..51bce825b0 --- /dev/null +++ b/drivers/eeprom/eeprom_i2c.h @@ -0,0 +1,115 @@ +/* Copyright 2019 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* + Default device configurations: + + For the Sparkfun Qwiic I2C EEPROM module: https://www.sparkfun.com/products/14764 + #define EEPROM_I2C_CAT24C512 // (part number 24512A) + #define EEPROM_I2C_RM24C512C // (part number 24512C) + + For the Sparkfun I2C EEPROM chip: https://www.sparkfun.com/products/525 + #define EEPROM_I2C_24LC256 + + For the Adafruit I2C FRAM chip: https://www.adafruit.com/product/1895 + #define EEPROM_I2C_MB85RC256V +*/ +#if defined(EEPROM_I2C_CAT24C512) +# define EXTERNAL_EEPROM_BYTE_COUNT 65536 +# define EXTERNAL_EEPROM_PAGE_SIZE 128 +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +# define EXTERNAL_EEPROM_WRITE_TIME 5 +#elif defined(EEPROM_I2C_RM24C512C) +# define EXTERNAL_EEPROM_BYTE_COUNT 65536 +# define EXTERNAL_EEPROM_PAGE_SIZE 128 +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +# define EXTERNAL_EEPROM_WRITE_TIME 3 +#elif defined(EEPROM_I2C_24LC256) +# define EXTERNAL_EEPROM_BYTE_COUNT 32768 +# define EXTERNAL_EEPROM_PAGE_SIZE 64 +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +# define EXTERNAL_EEPROM_WRITE_TIME 5 +#elif defined(EEPROM_I2C_24LC128) +# define EXTERNAL_EEPROM_BYTE_COUNT 16384 +# define EXTERNAL_EEPROM_PAGE_SIZE 64 +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +# define EXTERNAL_EEPROM_WRITE_TIME 5 +#elif defined(EEPROM_I2C_MB85RC256V) +# define EXTERNAL_EEPROM_BYTE_COUNT 32768 +# define EXTERNAL_EEPROM_PAGE_SIZE 128 +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +# define EXTERNAL_EEPROM_WRITE_TIME 0 +#endif + +/* + The base I2C address of the EEPROM. + This needs to be shifted up by 1, to match i2c_master requirements. +*/ +#ifndef EXTERNAL_EEPROM_I2C_BASE_ADDRESS +# define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000 +#endif + +/* + The calculated I2C address based on the input memory location. + + For EEPROM chips that embed part of the memory location in the I2C address + such as AT24M02 you can use something similar to the following (ensuring the + result is shifted by left by 1): + + #define EXTERNAL_EEPROM_I2C_ADDRESS(loc) \ + (EXTERNAL_EEPROM_I2C_BASE_ADDRESS | ((((loc) >> 16) & 0x07) << 1)) + +*/ +#ifndef EXTERNAL_EEPROM_I2C_ADDRESS +# define EXTERNAL_EEPROM_I2C_ADDRESS(loc) (EXTERNAL_EEPROM_I2C_BASE_ADDRESS) +#endif + +/* + The total size of the EEPROM, in bytes. The EEPROM datasheet will usually + specify this value in kbits, and will require conversion to bytes. +*/ +#ifndef EXTERNAL_EEPROM_BYTE_COUNT +# define EXTERNAL_EEPROM_BYTE_COUNT 8192 +#endif + +/* + The page size in bytes of the EEPROM, as specified in the datasheet. +*/ +#ifndef EXTERNAL_EEPROM_PAGE_SIZE +# define EXTERNAL_EEPROM_PAGE_SIZE 32 +#endif + +/* + The address size in bytes of the EEPROM. For EEPROMs with <=256 bytes, this + will likely be 1. For EEPROMs >256 and <=65536, this will be 2. For EEPROMs + >65536, this will likely need to be 2 with the modified variant of + EXTERNAL_EEPROM_I2C_ADDRESS above. + + As expected, consult the datasheet for specifics of your EEPROM. +*/ +#ifndef EXTERNAL_EEPROM_ADDRESS_SIZE +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +#endif + +/* + The write cycle time of the EEPROM in milliseconds, as specified in the + datasheet. +*/ +#ifndef EXTERNAL_EEPROM_WRITE_TIME +# define EXTERNAL_EEPROM_WRITE_TIME 5 +#endif diff --git a/drivers/eeprom/eeprom_transient.c b/drivers/eeprom/eeprom_transient.c new file mode 100644 index 0000000000..318a827900 --- /dev/null +++ b/drivers/eeprom/eeprom_transient.c @@ -0,0 +1,52 @@ +/* Copyright 2019 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +#include "eeprom_driver.h" +#include "eeprom_transient.h" + +static uint8_t transientBuffer[TRANSIENT_EEPROM_SIZE] = {0}; + +size_t clamp_length(intptr_t offset, size_t len) { + if (offset + len > TRANSIENT_EEPROM_SIZE) { + len = TRANSIENT_EEPROM_SIZE - offset; + } + + return len; +} + +void eeprom_driver_init(void) { eeprom_driver_erase(); } + +void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); } + +void eeprom_read_block(void *buf, const void *addr, size_t len) { + intptr_t offset = (intptr_t)addr; + memset(buf, 0x00, len); + len = clamp_length(offset, len); + if (len > 0) { + memcpy(buf, &transientBuffer[offset], len); + } +} + +void eeprom_write_block(const void *buf, void *addr, size_t len) { + intptr_t offset = (intptr_t)addr; + len = clamp_length(offset, len); + if (len > 0) { + memcpy(&transientBuffer[offset], buf, len); + } +} diff --git a/drivers/eeprom/eeprom_transient.h b/drivers/eeprom/eeprom_transient.h new file mode 100644 index 0000000000..a739fe393a --- /dev/null +++ b/drivers/eeprom/eeprom_transient.h @@ -0,0 +1,24 @@ +/* Copyright 2019 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* + The size of the transient EEPROM buffer size. +*/ +#ifndef TRANSIENT_EEPROM_SIZE +# define TRANSIENT_EEPROM_SIZE 64 +#endif diff --git a/keyboards/moonlander/config.h b/keyboards/moonlander/config.h new file mode 100644 index 0000000000..fce0ce857d --- /dev/null +++ b/keyboards/moonlander/config.h @@ -0,0 +1,114 @@ +/* +Copyright 2018 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +// clang-format off +#define VENDOR_ID 0x3297 +#define PRODUCT_ID 0x1969 +#define MANUFACTURER ZSA +#define PRODUCT Moonlander +#define DESCRIPTION A keyboard +#define DEVICE_VER 0x0001 +#define WEBUSB_LANDING_PAGE_URL u8"configure.ergodox-ez.com" + +// clang-format on + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 7 + +/* Planck PCB default pin-out */ +// #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 } +// #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6 } + +// #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 } +// #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 } + +// #define MCP23_LED_R GPB7 +// #define MCP23_LED_G GPB6 +// #define MCP23_LED_B GPA7 + +#define EEPROM_I2C_24LC128 + +// Not needed, is default address: +// #define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#ifndef LINK_TIME_OPTIMIZATION_ENABLE +# define NO_ACTION_MACRO +# define NO_ACTION_FUNCTION +#endif + +#define I2C1_CLOCK_SPEED 400000 + +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110111 + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 36 +#define DRIVER_2_LED_TOTAL 36 +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#define RGB_MATRIX_CENTER \ + { 125, 26 } +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 175 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES +#define RGB_DISABLE_WHEN_USB_SUSPENDED true + +// #define RGB_MATRIX_LED_PROCESS_LIMIT 5 +// #define RGB_MATRIX_LED_FLUSH_LIMIT 26 + +#define IGNORE_MOD_TAP_INTERRUPT + +#define TAPPING_TOGGLE 1 + +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_DELAY 0 +#define MOUSEKEY_TIME_TO_MAX 60 +#define MOUSEKEY_MAX_SPEED 7 +#define MOUSEKEY_WHEEL_DELAY 0 + +#define MUSIC_MAP diff --git a/keyboards/moonlander/keymaps/default/config.h b/keyboards/moonlander/keymaps/default/config.h new file mode 100644 index 0000000000..8da226b0a6 --- /dev/null +++ b/keyboards/moonlander/keymaps/default/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define ORYX_CONFIGURATOR diff --git a/keyboards/moonlander/keymaps/default/keymap.c b/keyboards/moonlander/keymaps/default/keymap.c new file mode 100644 index 0000000000..260f9f50ea --- /dev/null +++ b/keyboards/moonlander/keymaps/default/keymap.c @@ -0,0 +1,79 @@ +/* +Copyright 2018 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H +#include "version.h" + +enum layers { + BASE, // default layer + SYMB, // symbols + MDIA, // media keys +}; + +enum custom_keycodes { + EPRM = ML_SAFE_RANGE, + VRSN, +}; + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_moonlander( + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_HYPR, KC_MEH, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN), GUI_T(KC_QUOT), + KC_LSFT, LCTL_T(KC_Z),KC_X,KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, LCTL_T(KC_SLSH), KC_LSFT, + LT(SYMB,KC_GRV),KC_QUOT,A(KC_LSFT),KC_LEFT, KC_RGHT, LALT_T(KC_APP), RCTL_T(KC_ESC), KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, TT(SYMB), + KC_SPC, KC_BSPC, KC_LGUI, KC_RALT, KC_TAB, KC_ENT + ), + + [SYMB] = LAYOUT_moonlander( + VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_TRNS, KC_TRNS, KC_UP, KC_7, KC_8, KC_9, KC_ASTR, KC_F12, + KC_TRNS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_GRV, KC_TRNS, KC_TRNS, KC_DOWN, KC_4, KC_5, KC_6, KC_PLUS, KC_TRNS, + KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_AMPR, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS, + EPRM, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, RGB_TOG, KC_TRNS, KC_DOT, KC_0, KC_EQL, KC_TRNS, + RGB_HUD, RGB_VAD, RGB_HUI, TOGGLE_LAYER_COLOR,KC_TRNS, KC_TRNS + ), + + [1] = LAYOUT_moonlander( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch (keycode) { + case EPRM: + eeconfig_init(); + return false; + case VRSN: + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + return false; + #ifdef RGBLIGHT_ENABLE + case RGB_SLD: + rgblight_mode(1); + return false; + #endif + } + } + return true; +} diff --git a/keyboards/moonlander/keymaps/webusb/config.h b/keyboards/moonlander/keymaps/webusb/config.h new file mode 100644 index 0000000000..be3110d3b0 --- /dev/null +++ b/keyboards/moonlander/keymaps/webusb/config.h @@ -0,0 +1,3 @@ +#pragma once + +#include "../default/config.h" diff --git a/keyboards/moonlander/keymaps/webusb/keymap.c b/keyboards/moonlander/keymaps/webusb/keymap.c new file mode 100644 index 0000000000..ff7bd09c0c --- /dev/null +++ b/keyboards/moonlander/keymaps/webusb/keymap.c @@ -0,0 +1 @@ +// placeholder diff --git a/keyboards/moonlander/keymaps/webusb/rules.mk b/keyboards/moonlander/keymaps/webusb/rules.mk new file mode 100644 index 0000000000..c755201f0d --- /dev/null +++ b/keyboards/moonlander/keymaps/webusb/rules.mk @@ -0,0 +1,4 @@ +SRC += ../default/keymap.c +-include ../default/rules.mk + +WEBUSB_ENABLE = yes diff --git a/keyboards/moonlander/matrix.c b/keyboards/moonlander/matrix.c new file mode 100644 index 0000000000..9fef2f2746 --- /dev/null +++ b/keyboards/moonlander/matrix.c @@ -0,0 +1,262 @@ +/* +Copyright 2018 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "printf.h" +#include "matrix.h" +#include "action.h" +#include "keycode.h" +#include +#include "moonlander.h" +#include "i2c_master.h" +#include "debounce.h" + +/* +#define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 } outputs +#define MATRIX_COL_PINS { A0, A1, A2, A3, A6, A7, B0 } inputs + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing_right[MATRIX_COLS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; +static bool debouncing_right = false; +static uint16_t debouncing_time_right = 0; + +#define ROWS_PER_HAND (MATRIX_ROWS / 2) + +extern bool mcp23018_leds[3]; +extern bool is_launching; + +__attribute__((weak)) void matrix_init_user(void) {} + +__attribute__((weak)) void matrix_scan_user(void) {} + +__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } + +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } + +bool mcp23018_initd = false; +static uint8_t mcp23018_reset_loop; + +uint8_t mcp23018_tx[3]; +uint8_t mcp23018_rx[1]; + +void mcp23018_init(void) { + i2c_init(); + i2c_start(MCP23018_DEFAULT_ADDRESS << 1); + + // #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 } outputs + // #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 } inputs + + mcp23018_tx[0] = 0x00; // IODIRA + mcp23018_tx[1] = 0b00000000; // A is output + mcp23018_tx[2] = 0b00111111; // B is inputs + + if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, I2C_TIMEOUT)) { + printf("error hori\n"); + } else { + mcp23018_tx[0] = 0x0C; // GPPUA + mcp23018_tx[1] = 0b10000000; // A is not pulled-up + mcp23018_tx[2] = 0b11111111; // B is pulled-up + + if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, I2C_TIMEOUT)) { + printf("error hori\n"); + } else { + mcp23018_initd = is_launching = true; + } + } +} + +void matrix_init(void) { + printf("matrix init\n"); + // debug_matrix = true; + + // outputs + setPinOutput(B10); + setPinOutput(B11); + setPinOutput(B12); + setPinOutput(B13); + setPinOutput(B14); + setPinOutput(B15); + + // inputs + setPinInputLow(A0); + setPinInputLow(A1); + setPinInputLow(A2); + setPinInputLow(A3); + setPinInputLow(A6); + setPinInputLow(A7); + setPinInputLow(B0); + + memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(matrix_debouncing_right, 0, MATRIX_COLS * sizeof(matrix_row_t)); + + mcp23018_init(); + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + bool changed = false; + + matrix_row_t data = 0; + // actual matrix + for (uint8_t row = 0; row < ROWS_PER_HAND; row++) { + // strobe row + switch (row) { + case 0: writePinHigh(B10); break; + case 1: writePinHigh(B11); break; + case 2: writePinHigh(B12); break; + case 3: writePinHigh(B13); break; + case 4: writePinHigh(B14); break; + case 5: writePinHigh(B15); break; + } + + // need wait to settle pin state + wait_us(20); + + // read col data + data = ( + (readPin(A0) << 0 ) | + (readPin(A1) << 1 ) | + (readPin(A2) << 2 ) | + (readPin(A3) << 3 ) | + (readPin(A6) << 4 ) | + (readPin(A7) << 5 ) | + (readPin(B0) << 6 ) + ); + + // unstrobe row + switch (row) { + case 0: writePinLow(B10); break; + case 1: writePinLow(B11); break; + case 2: writePinLow(B12); break; + case 3: writePinLow(B13); break; + case 4: writePinLow(B14); break; + case 5: writePinLow(B15); break; + } + + if (matrix_debouncing[row] != data) { + matrix_debouncing[row] = data; + debouncing = true; + debouncing_time = timer_read(); + changed = true; + } + } + + for (uint8_t row = 0; row <= ROWS_PER_HAND; row++) { + // right side + + if (!mcp23018_initd) { + if (++mcp23018_reset_loop == 0) { + // if (++mcp23018_reset_loop >= 1300) { + // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + print("trying to reset mcp23018\n"); + mcp23018_init(); + if (!mcp23018_initd) { + print("left side not responding\n"); + } else { + print("left side attached\n"); +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_init(); +#endif + } + } + } + + // #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 } outputs + // #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 } inputs + + // select row + + mcp23018_tx[0] = 0x12; // GPIOA + mcp23018_tx[1] = (0b01111111 & ~(1 << (row))) | ((uint8_t)!mcp23018_leds[2] << 7); // activate row + mcp23018_tx[2] = ((uint8_t)!mcp23018_leds[1] << 6) | ((uint8_t)!mcp23018_leds[0] << 7); // activate row + + if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, I2C_TIMEOUT)) { + printf("error hori\n"); + mcp23018_initd = false; + } + + // read col + + mcp23018_tx[0] = 0x13; // GPIOB + if (MSG_OK != i2c_readReg(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx[0], &mcp23018_rx[0], 1, I2C_TIMEOUT)) { + printf("error vert\n"); + mcp23018_initd = false; + } + + data = ~(mcp23018_rx[0] & 0b00111111); + // data = 0x01; + + if (matrix_debouncing_right[row] != data) { + matrix_debouncing_right[row] = data; + debouncing_right = true; + debouncing_time_right = timer_read(); + changed = true; + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < ROWS_PER_HAND; row++) { + matrix[row] = matrix_debouncing[row]; + } + debouncing = false; + } + + if (debouncing_right && timer_elapsed(debouncing_time_right) > DEBOUNCE && mcp23018_initd) { + for (int row = 0; row < ROWS_PER_HAND; row++) { + matrix[11 - row] = 0; + for (int col = 0; col < MATRIX_COLS; col++) { + matrix[11 - row] |= ((matrix_debouncing_right[6 - col] & (1 << row) ? 1 : 0) << col); + } + } + debouncing_right = false; + } + + matrix_scan_quantum(); + + return (uint8_t)changed; +} + +bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); } + +matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } + +void matrix_print(void) { + printf("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + printf("%X0: ", row); + matrix_row_t data = matrix_get_row(row); + for (int col = 0; col < MATRIX_COLS; col++) { + if (data & (1 << col)) + printf("1"); + else + printf("0"); + } + printf("\n"); + } +} diff --git a/keyboards/moonlander/moonlander.c b/keyboards/moonlander/moonlander.c new file mode 100644 index 0000000000..61ef892139 --- /dev/null +++ b/keyboards/moonlander/moonlander.c @@ -0,0 +1,425 @@ +/* +Copyright 2018 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "moonlander.h" +#ifdef WEBUSB_ENABLE +#include "webusb.h" +#endif + +keyboard_config_t keyboard_config; + +bool mcp23018_leds[3] = {0, 0, 0}; +bool is_launching = false; + +void moonlander_led_task(void) { + if (is_launching) { + ML_LED_1(false); + ML_LED_2(false); + ML_LED_3(false); + ML_LED_4(false); + ML_LED_5(false); + ML_LED_6(false); + + ML_LED_1(true); + wait_ms(250); + ML_LED_2(true); + wait_ms(250); + ML_LED_3(true); + wait_ms(250); + ML_LED_4(true); + wait_ms(250); + ML_LED_5(true); + wait_ms(250); + ML_LED_6(true); + wait_ms(250); + ML_LED_1(false); + wait_ms(250); + ML_LED_2(false); + wait_ms(250); + ML_LED_3(false); + wait_ms(250); + ML_LED_4(false); + wait_ms(250); + ML_LED_5(false); + wait_ms(250); + ML_LED_6(false); + wait_ms(250); + is_launching = false; + layer_state_set_kb(layer_state); + } +#ifdef WEBUSB_ENABLE + if (webusb_state.pairing == true) { + static uint8_t led_mask; + + ML_LED_1(false); + ML_LED_2(false); + ML_LED_3(false); + ML_LED_4(false); + ML_LED_5(false); + ML_LED_6(false); + + if (!led_mask) { + led_mask = 1; + } else { + led_mask++; + if (led_mask > 10) led_mask = 1; + } + switch (led_mask) { + case 1: + ML_LED_1(true); + break; + case 2: + case 10: + ML_LED_2(true); + break; + case 3: + case 9: + ML_LED_3(true); + break; + case 4: + case 8: + ML_LED_4(true); + break; + case 5: + case 7: + ML_LED_5(true); + break; + case 6: + ML_LED_6(true); + break; + } + wait_ms(150); + } +#endif +} + +static THD_WORKING_AREA(waLEDThread, 128); +static THD_FUNCTION(LEDThread, arg) { + (void)arg; + chRegSetThreadName("LEDThread"); + while (true) { + moonlander_led_task(); + } +} + + +void keyboard_pre_init_kb(void) { + setPinOutput(B5); + setPinOutput(B4); + setPinOutput(B3); + + writePinLow(B5); + writePinLow(B4); + writePinLow(B3); + + + chThdCreateStatic(waLEDThread, sizeof(waLEDThread), NORMALPRIO-16, LEDThread, NULL); + + /* the array is initialized to 0, no need to re-set it here */ + // mcp23018_leds[0] = 0; // blue + // mcp23018_leds[1] = 0; // green + // mcp23018_leds[2] = 0; // red + + keyboard_pre_init_user(); +} + +layer_state_t layer_state_set_kb(layer_state_t state) { + state = layer_state_set_user(state); + if (is_launching) return state; + + ML_LED_1(0); + ML_LED_2(0); + ML_LED_3(0); + ML_LED_4(0); + ML_LED_5(0); + ML_LED_6(0); + + uint8_t layer = get_highest_layer(state); + switch (layer) { + case 1: + ML_LED_1(1); + ML_LED_4(1); + break; + case 2: + ML_LED_2(1); + ML_LED_5(1); + break; + case 3: + ML_LED_3(1); + break; + case 4: + ML_LED_4(1); + break; + case 5: + ML_LED_5(1); + break; + case 6: + ML_LED_6(1); + break; + default: + break; + } + + return state; +} + +#ifdef RGB_MATRIX_ENABLE +// clang-format off +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C3_2, C1_1, C4_2}, // 1 + {0, C2_2, C1_2, C4_3}, + {0, C2_3, C1_3, C3_3}, + {0, C2_4, C1_4, C3_4}, + {0, C2_5, C1_5, C3_5}, + {0, C2_6, C1_6, C3_6}, + {0, C2_7, C1_7, C3_7}, + {0, C2_8, C1_8, C3_8}, + {0, C3_1, C2_1, C4_1}, + + {0, C7_8, C6_8, C8_8}, // 10 + {0, C7_7, C6_7, C9_8}, + {0, C8_7, C6_6, C9_7}, + {0, C8_6, C7_6, C9_6}, + {0, C8_5, C7_5, C9_5}, + {0, C8_4, C7_4, C9_4}, + {0, C8_3, C7_3, C9_3}, + {0, C8_2, C7_2, C9_2}, + {0, C8_1, C7_1, C9_1}, + + {0, C3_10, C1_9, C4_10}, // 19 + {0, C2_10, C1_10, C4_11}, + {0, C2_11, C1_11, C3_11}, + {0, C2_12, C1_12, C3_12}, + {0, C2_13, C1_13, C3_13}, + {0, C2_14, C1_14, C3_14}, + {0, C2_15, C1_15, C3_15}, + {0, C2_16, C1_16, C3_16}, + {0, C3_9, C2_9, C4_9}, + + {0, C7_16, C6_16, C8_16}, // 28 + {0, C7_15, C6_15, C9_16}, + {0, C8_15, C6_14, C9_15}, + {0, C8_10, C7_10, C9_10}, + {0, C8_9, C7_9, C9_9}, + {0, C8_11, C7_11, C9_11}, + {0, C8_12, C7_12, C9_12}, + {0, C8_13, C7_13, C9_13}, + {0, C8_14, C7_14, C9_14}, + + {1, C3_2, C1_1, C4_2}, // 1 + {1, C2_2, C1_2, C4_3}, + {1, C2_3, C1_3, C3_3}, + {1, C2_4, C1_4, C3_4}, + {1, C2_5, C1_5, C3_5}, + {1, C2_6, C1_6, C3_6}, + {1, C2_7, C1_7, C3_7}, + {1, C2_8, C1_8, C3_8}, + {1, C3_1, C2_1, C4_1}, + + {1, C7_8, C6_8, C8_8}, // 10 + {1, C7_7, C6_7, C9_8}, + {1, C8_7, C6_6, C9_7}, + {1, C8_6, C7_6, C9_6}, + {1, C8_5, C7_5, C9_5}, + {1, C8_4, C7_4, C9_4}, + {1, C8_3, C7_3, C9_3}, + {1, C8_2, C7_2, C9_2}, + {1, C8_1, C7_1, C9_1}, + + {1, C3_10, C1_9, C4_10}, // 19 + {1, C2_10, C1_10, C4_11}, + {1, C2_11, C1_11, C3_11}, + {1, C2_12, C1_12, C3_12}, + {1, C2_13, C1_13, C3_13}, + {1, C2_14, C1_14, C3_14}, + {1, C2_15, C1_15, C3_15}, + {1, C2_16, C1_16, C3_16}, + {1, C3_9, C2_9, C4_9}, + + {1, C7_16, C6_16, C8_16}, // 28 + {1, C7_15, C6_15, C9_16}, + {1, C8_15, C6_14, C9_15}, + {1, C8_10, C7_10, C9_10}, + {1, C8_9, C7_9, C9_9}, + {1, C8_11, C7_11, C9_11}, + {1, C8_12, C7_12, C9_12}, + {1, C8_13, C7_13, C9_13}, + {1, C8_14, C7_14, C9_14}, + +}; + +led_config_t g_led_config = { { + { 0, 5, 10, 15, 20, 25, 29 }, + { 1, 6, 11, 16, 21, 26, 30 }, + { 2, 7, 12, 17, 22, 27, 31 }, + { 3, 8, 13, 18, 23, 28, NO_LED }, + { 4, 9, 14, 19, 24, NO_LED, NO_LED }, + { 32, 33, 34, 35, NO_LED, NO_LED, NO_LED }, + { 65, 61, 56, 51, 46, 41, 36 }, + { 66, 62, 57, 52, 47, 42, 37 }, + { 67, 63, 58, 53, 48, 43, 38 }, + { NO_LED, 64, 59, 54, 49, 44, 39 }, + { NO_LED, NO_LED, 60, 55, 50, 45, 40 }, + { NO_LED, NO_LED, NO_LED, 71, 70, 69, 68 }, +}, { + { 0, 0 }, { 0, 12 }, { 0, 25 }, { 0, 38 }, { 0, 51 }, + { 17, 0 }, { 17, 12 }, { 17, 25 }, { 17, 38 }, { 17, 51 }, + { 34, 0 }, { 34, 12 }, { 34, 25 }, { 34, 38 }, { 34, 51 }, + { 51, 0 }, { 51, 12 }, { 51, 25 }, { 51, 38 }, { 51, 51 }, + { 68, 0 }, { 68, 12 }, { 68, 25 }, { 68, 38 }, { 68, 51 }, + { 86, 0 }, { 86, 12 }, { 86, 25 }, { 86, 38 }, + { 105, 0 }, { 105, 12 }, { 105, 25 }, + { 90, 55 }, { 105, 68 }, { 116, 86 }, { 116, 59 }, + + { 250, 0 }, { 250, 12 }, { 250, 25 }, { 250, 38 }, { 250, 51 }, + { 233, 0 }, { 233, 12 }, { 233, 25 }, { 233, 38 }, { 233, 51 }, + { 216, 0 }, { 216, 12 }, { 216, 25 }, { 216, 38 }, { 216, 51 }, + { 198, 0 }, { 198, 12 }, { 198, 25 }, { 198, 38 }, { 198, 51 }, + { 181, 0 }, { 181, 12 }, { 181, 25 }, { 181, 38 }, { 181, 51 }, + { 163, 0 }, { 163, 12 }, { 163, 25 }, { 163, 38 }, + { 146, 0 }, { 146, 12 }, { 146, 25 }, + { 161, 55 }, { 161, 68 }, { 146, 86 }, { 131, 59 } + +}, { + 1, 1, 1, 1, 1, 4, + 4, 4, 4, 1, 4, 4, + 4, 4, 1, 4, 4, 4, + 4, 1, 4, 4, 4, 4, + 1, 4, 4, 4, 4, 4, + 4, 4, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 4, + 4, 4, 4, 1, 4, 4, + 4, 4, 1, 4, 4, 4, + 4, 1, 4, 4, 4, 4, + 1, 4, 4, 4, 4, 4, + 4, 4, 1, 1, 1, 1 +} }; +// clang-format on + +void suspend_power_down_kb(void) { + rgb_matrix_set_suspend_state(true); + suspend_power_down_user(); +} + + void suspend_wakeup_init_kb(void) { + rgb_matrix_set_suspend_state(false); + suspend_wakeup_init_user(); +} +#endif + +#ifdef AUDIO_ENABLE +bool music_mask_kb(uint16_t keycode) { + switch (keycode) { + case QK_LAYER_TAP ... QK_ONE_SHOT_LAYER_MAX: + case QK_LAYER_TAP_TOGGLE ... QK_LAYER_MOD_MAX: + case QK_MOD_TAP ... QK_MOD_TAP_MAX: + case AU_ON ... MUV_DE: + case RESET: + case EEP_RST: + return false; + default: + return music_mask_user(keycode); + } +} +#endif + +#ifdef SWAP_HANDS_ENABLE +// swap-hands action needs a matrix to define the swap +// clang-format off +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + /* Left hand, matrix positions */ + {{6,6}, {5,6}, {4,6}, {3,6}, {2,6}, {1,6},{0,6}}, + {{6,7}, {5,7}, {4,7}, {3,7}, {2,7}, {1,7},{0,7}}, + {{6,8}, {5,8}, {4,8}, {3,8}, {2,8}, {1,8},{0,8}}, + {{6,9}, {5,9}, {4,9}, {3,9}, {2,9}, {1,9},{0,9}}, + {{6,10},{5,10},{4,10},{3,10},{2,10},{1,10},{0,10}}, + {{6,11},{5,11},{4,11},{3,11},{2,11},{1,11},{0,11}}, + /* Right hand, matrix positions */ + {{6,0}, {5,0}, {4,0}, {3,0}, {2,0}, {1,0},{0,0}}, + {{6,1}, {5,1}, {4,1}, {3,1}, {2,1}, {1,1},{0,1}}, + {{6,2}, {5,2}, {4,2}, {3,2}, {2,2}, {1,2},{0,2}}, + {{6,3}, {5,3}, {4,3}, {3,3}, {2,3}, {1,3},{0,3}}, + {{6,4}, {5,4}, {4,4}, {3,4}, {2,4}, {1,4},{0,4}}, + {{6,5}, {5,5}, {4,5}, {3,5}, {2,5}, {1,5},{0,5}}, +}; +// clang-format on +#endif + +#if defined(AUDIO_ENABLE) && defined(MUSIC_MAP) +// clang-format off +const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_moonlander( + 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, + 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, + 8, 9, 10, 11, 12, 3, 4, 13, 14, 15, 16, 17, + 0, 1, 2, 5, 6, 7 +); +// clang-format on +#endif + + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { +#ifdef WEBUSB_ENABLE + if(webusb_state.paired == true) { + uint8_t event[5]; + event[0] = WEBUSB_STATUS_OK; + event[1] = record->event.pressed ? WEBUSB_EVT_KEYDOWN : WEBUSB_EVT_KEYUP; + event[2] = record->event.key.col; + event[3] = record->event.key.row; + event[4] = WEBUSB_STOP_BIT; + webusb_send(event, sizeof(event)); + } +#endif + switch (keycode) { +#ifdef RGB_MATRIX_ENABLE + case TOGGLE_LAYER_COLOR: + if (record->event.pressed) { + keyboard_config.disable_layer_led ^= 1; + if (keyboard_config.disable_layer_led) + rgb_matrix_set_color_all(0, 0, 0); + eeconfig_update_kb(keyboard_config.raw); + } + break; + case RGB_TOG: + if (record->event.pressed) { + switch (rgb_matrix_get_flags()) { + case LED_FLAG_ALL: { + rgb_matrix_set_flags(LED_FLAG_NONE); + keyboard_config.rgb_matrix_enable = false; + rgb_matrix_set_color_all(0, 0, 0); + } + break; + default: { + rgb_matrix_set_flags(LED_FLAG_ALL); + keyboard_config.rgb_matrix_enable = true; + } + break; + } + eeconfig_update_kb(keyboard_config.raw); + } + return false; +#endif + } + return process_record_user(keycode, record); +} diff --git a/keyboards/moonlander/moonlander.h b/keyboards/moonlander/moonlander.h new file mode 100644 index 0000000000..399a6a6ec3 --- /dev/null +++ b/keyboards/moonlander/moonlander.h @@ -0,0 +1,71 @@ +/* +Copyright 2018 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define MCP23018_DEFAULT_ADDRESS 0b0100000 + +#define ML_LED_1(status) writePin(B5, (bool)status) +#define ML_LED_2(status) writePin(B4, (bool)status) +#define ML_LED_3(status) writePin(B3, (bool)status) + +#define ML_LED_4(status) mcp23018_leds[0] = (bool)status +#define ML_LED_5(status) mcp23018_leds[1] = (bool)status +#define ML_LED_6(status) mcp23018_leds[2] = (bool)status + +#include "quantum.h" + +// clang-format off +#define LAYOUT_moonlander( \ + k00, k01, k02, k03, k04, k05, k06, k60, k61, k62, k63, k64, k65, k66, \ + k10, k11, k12, k13, k14, k15, k16, k70, k71, k72, k73, k74, k75, k76, \ + k20, k21, k22, k23, k24, k25, k26, k80, k81, k82, k83, k84, k85, k86, \ + k30, k31, k32, k33, k34, k35, k91, k92, k93, k94, k95, k96, \ + k40, k41, k42, k43, k44, k53, kb3, ka2, ka3, ka4, ka5, ka6, \ + k50, k51, k52, kb4, kb5, kb6 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06 }, \ + { k10, k11, k12, k13, k14, k15, k16 }, \ + { k20, k21, k22, k23, k24, k25, k26 }, \ + { k30, k31, k32, k33, k34, k35, KC_NO }, \ + { k40, k41, k42, k43, k44, KC_NO, KC_NO }, \ + { k50, k51, k52, k53, KC_NO, KC_NO, KC_NO }, \ +\ + { k60, k61, k62, k63, k64, k65, k66 }, \ + { k70, k71, k72, k73, k74, k75, k76 }, \ + { k80, k81, k82, k83, k84, k85, k86 }, \ + { KC_NO,k91, k92, k93, k94, k95, k96 }, \ + { KC_NO, KC_NO, ka2, ka3, ka4, ka5, ka6 }, \ + { KC_NO, KC_NO, KC_NO, kb3, kb4, kb5, kb6 } \ +} +// clang-format on + +enum planck_ez_keycodes { + TOGGLE_LAYER_COLOR = SAFE_RANGE, + ML_SAFE_RANGE, +}; + +typedef union { + uint32_t raw; + struct { + bool disable_layer_led :1; + bool rgb_matrix_enable :1; + }; +} keyboard_config_t; + +extern keyboard_config_t keyboard_config; diff --git a/keyboards/moonlander/rules.mk b/keyboards/moonlander/rules.mk new file mode 100644 index 0000000000..f481b60763 --- /dev/null +++ b/keyboards/moonlander/rules.mk @@ -0,0 +1,24 @@ +#Cortex version +MCU = STM32F303 + +#Build Options +#comment out to disable the options. +# +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes #Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +CUSTOM_MATRIX = yes # Custom matrix file +AUDIO_ENABLE = yes +SWAP_HANDS_ENABLE = yes +RGB_MATRIX_ENABLE = IS31FL3731 +#SERIAL_LINK_ENABLE = yes +EEPROM_DRIVER = i2c + +#project specific files +SRC = matrix.c +QUANTUM_LIB_SRC += i2c_master.c diff --git a/quantum/audio/audio_arm.c b/quantum/audio/audio_arm.c index 7ef02ebaae..a194a66419 100644 --- a/quantum/audio/audio_arm.c +++ b/quantum/audio/audio_arm.c @@ -270,7 +270,7 @@ void audio_init() { } // Check EEPROM -#if defined(STM32_EEPROM_ENABLE) || defined(PROTOCOL_ARM_ATSAM) || defined(EEPROM_SIZE) +#ifdef EEPROM_ENABLE if (!eeconfig_is_enabled()) { eeconfig_init(); } diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 07c3c9770b..e0ed30879b 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -19,9 +19,11 @@ # include # include #endif +#ifdef EEPROM_ENABLE +# include "eeprom.h" +#endif #ifdef STM32_EEPROM_ENABLE # include "hal.h" -# include "eeprom.h" # include "eeprom_stm32.h" #endif #include "wait.h" @@ -146,7 +148,7 @@ void rgblight_check_config(void) { } uint32_t eeconfig_read_rgblight(void) { -#if defined(__AVR__) || defined(STM32_EEPROM_ENABLE) || defined(PROTOCOL_ARM_ATSAM) || defined(EEPROM_SIZE) +#ifdef EEPROM_ENABLE return eeprom_read_dword(EECONFIG_RGBLIGHT); #else return 0; @@ -154,7 +156,7 @@ uint32_t eeconfig_read_rgblight(void) { } void eeconfig_update_rgblight(uint32_t val) { -#if defined(__AVR__) || defined(STM32_EEPROM_ENABLE) || defined(PROTOCOL_ARM_ATSAM) || defined(EEPROM_SIZE) +#ifdef EEPROM_ENABLE rgblight_check_config(); eeprom_update_dword(EECONFIG_RGBLIGHT, val); #endif diff --git a/tmk_core/common.mk b/tmk_core/common.mk index a69056b7dc..3de7c0cdfd 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -26,29 +26,11 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \ $(PLATFORM_COMMON_DIR)/bootloader.c \ ifeq ($(PLATFORM),AVR) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S + TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/xprintf.S endif ifeq ($(PLATFORM),CHIBIOS) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c - ifeq ($(MCU_SERIES), STM32F3xx) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - TMK_COMMON_DEFS += -DEEPROM_EMU_STM32F303xC - TMK_COMMON_DEFS += -DSTM32_EEPROM_ENABLE - else ifeq ($(MCU_SERIES), STM32F1xx) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - TMK_COMMON_DEFS += -DEEPROM_EMU_STM32F103xB - TMK_COMMON_DEFS += -DSTM32_EEPROM_ENABLE - else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - TMK_COMMON_DEFS += -DEEPROM_EMU_STM32F072xB - TMK_COMMON_DEFS += -DSTM32_EEPROM_ENABLE - else - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c - endif + TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes) TMK_COMMON_SRC += $(CHIBIOS)/os/various/syscalls.c else ifeq ($(strip $(TERMINAL_ENABLE)), yes) @@ -57,15 +39,9 @@ ifeq ($(PLATFORM),CHIBIOS) endif ifeq ($(PLATFORM),ARM_ATSAM) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom.c + TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c endif -ifeq ($(PLATFORM),TEST) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom.c -endif - - # Option modules BOOTMAGIC_ENABLE ?= no diff --git a/tmk_core/common/arm_atsam/eeprom.c b/tmk_core/common/arm_atsam/eeprom.c index 44a0bf4d76..5c8e69dae3 100644 --- a/tmk_core/common/arm_atsam/eeprom.c +++ b/tmk_core/common/arm_atsam/eeprom.c @@ -40,7 +40,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) { return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24); } -void eeprom_read_block(void *buf, const void *addr, uint32_t len) { +void eeprom_read_block(void *buf, const void *addr, size_t len) { const uint8_t *p = (const uint8_t *)addr; uint8_t * dest = (uint8_t *)buf; while (len--) { @@ -62,7 +62,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_byte(p, value >> 24); } -void eeprom_write_block(const void *buf, void *addr, uint32_t len) { +void eeprom_write_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { @@ -86,7 +86,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) { eeprom_write_byte(p, value >> 24); } -void eeprom_update_block(const void *buf, void *addr, uint32_t len) { +void eeprom_update_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { diff --git a/tmk_core/common/chibios/eeprom_stm32.c b/tmk_core/common/chibios/eeprom_stm32.c index 926b581c6b..ea51989728 100644 --- a/tmk_core/common/chibios/eeprom_stm32.c +++ b/tmk_core/common/chibios/eeprom_stm32.c @@ -173,7 +173,7 @@ void eeprom_update_dword(uint32_t *Address, uint32_t Value) { } } -void eeprom_read_block(void *buf, const void *addr, uint32_t len) { +void eeprom_read_block(void *buf, const void *addr, size_t len) { const uint8_t *p = (const uint8_t *)addr; uint8_t * dest = (uint8_t *)buf; while (len--) { @@ -181,7 +181,7 @@ void eeprom_read_block(void *buf, const void *addr, uint32_t len) { } } -void eeprom_write_block(const void *buf, void *addr, uint32_t len) { +void eeprom_write_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { @@ -189,7 +189,7 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) { } } -void eeprom_update_block(const void *buf, void *addr, uint32_t len) { +void eeprom_update_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { diff --git a/tmk_core/common/chibios/eeprom_teensy.c b/tmk_core/common/chibios/eeprom_teensy.c index a4093fb3ba..45f9a530da 100644 --- a/tmk_core/common/chibios/eeprom_teensy.c +++ b/tmk_core/common/chibios/eeprom_teensy.c @@ -517,7 +517,7 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) { #else // No EEPROM supported, so emulate it -# define EEPROM_SIZE 32 +# define EEPROM_SIZE 64 static uint8_t buffer[EEPROM_SIZE]; uint8_t eeprom_read_byte(const uint8_t *addr) { @@ -540,7 +540,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) { return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24); } -void eeprom_read_block(void *buf, const void *addr, uint32_t len) { +void eeprom_read_block(void *buf, const void *addr, size_t len) { const uint8_t *p = (const uint8_t *)addr; uint8_t * dest = (uint8_t *)buf; while (len--) { @@ -562,7 +562,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_byte(p, value >> 24); } -void eeprom_write_block(const void *buf, void *addr, uint32_t len) { +void eeprom_write_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { @@ -589,7 +589,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) { eeprom_write_byte(p, value >> 24); } -void eeprom_update_block(const void *buf, void *addr, uint32_t len) { +void eeprom_update_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { diff --git a/tmk_core/common/eeconfig.c b/tmk_core/common/eeconfig.c index 72f198d6ce..20d64438b1 100644 --- a/tmk_core/common/eeconfig.c +++ b/tmk_core/common/eeconfig.c @@ -9,6 +9,11 @@ # include "eeprom_stm32.h" #endif +#if defined(EEPROM_DRIVER) +# include "eeprom_driver.h" +#endif + +extern uint32_t default_layer_state; /** \brief eeconfig enable * * FIXME: needs doc @@ -31,6 +36,9 @@ __attribute__((weak)) void eeconfig_init_kb(void) { void eeconfig_init_quantum(void) { #ifdef STM32_EEPROM_ENABLE EEPROM_Erase(); +#endif +#if defined(EEPROM_DRIVER) + eeprom_driver_erase(); #endif eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER); eeprom_update_byte(EECONFIG_DEBUG, 0); @@ -80,6 +88,9 @@ void eeconfig_enable(void) { eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_N void eeconfig_disable(void) { #ifdef STM32_EEPROM_ENABLE EEPROM_Erase(); +#endif +#if defined(EEPROM_DRIVER) + eeprom_driver_erase(); #endif eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER_OFF); } diff --git a/tmk_core/common/eeprom.h b/tmk_core/common/eeprom.h index fcd1667c06..8a81e70668 100644 --- a/tmk_core/common/eeprom.h +++ b/tmk_core/common/eeprom.h @@ -1,23 +1,24 @@ #ifndef TMK_CORE_COMMON_EEPROM_H_ #define TMK_CORE_COMMON_EEPROM_H_ -#if defined(__AVR__) +#if defined(__AVR__) && !defined(EEPROM_DRIVER) # include #else # include +# include uint8_t eeprom_read_byte(const uint8_t *__p); uint16_t eeprom_read_word(const uint16_t *__p); uint32_t eeprom_read_dword(const uint32_t *__p); -void eeprom_read_block(void *__dst, const void *__src, uint32_t __n); +void eeprom_read_block(void *__dst, const void *__src, size_t __n); void eeprom_write_byte(uint8_t *__p, uint8_t __value); void eeprom_write_word(uint16_t *__p, uint16_t __value); void eeprom_write_dword(uint32_t *__p, uint32_t __value); -void eeprom_write_block(const void *__src, void *__dst, uint32_t __n); +void eeprom_write_block(const void *__src, void *__dst, size_t __n); void eeprom_update_byte(uint8_t *__p, uint8_t __value); void eeprom_update_word(uint16_t *__p, uint16_t __value); void eeprom_update_dword(uint32_t *__p, uint32_t __value); -void eeprom_update_block(const void *__src, void *__dst, uint32_t __n); +void eeprom_update_block(const void *__src, void *__dst, size_t __n); #endif #endif /* TMK_CORE_COMMON_EEPROM_H_ */ diff --git a/tmk_core/common/test/eeprom.c b/tmk_core/common/test/eeprom.c index 44a0bf4d76..5c8e69dae3 100644 --- a/tmk_core/common/test/eeprom.c +++ b/tmk_core/common/test/eeprom.c @@ -40,7 +40,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) { return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24); } -void eeprom_read_block(void *buf, const void *addr, uint32_t len) { +void eeprom_read_block(void *buf, const void *addr, size_t len) { const uint8_t *p = (const uint8_t *)addr; uint8_t * dest = (uint8_t *)buf; while (len--) { @@ -62,7 +62,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_byte(p, value >> 24); } -void eeprom_write_block(const void *buf, void *addr, uint32_t len) { +void eeprom_write_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { @@ -86,7 +86,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) { eeprom_write_byte(p, value >> 24); } -void eeprom_update_block(const void *buf, void *addr, uint32_t len) { +void eeprom_update_block(const void *buf, void *addr, size_t len) { uint8_t * p = (uint8_t *)addr; const uint8_t *src = (const uint8_t *)buf; while (len--) { -- cgit v1.2.3