From 7ea8753b72ed7ddecdcb2db5b223ca920f8155b3 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Mon, 10 Jul 2017 13:46:39 +0300 Subject: Don't run dfu-programmer unless specified as a target This introduces a grep dependency, which I believe we didn't have before, but it should be available and installed by default on all the supported systems. --- tmk_core/avr.mk | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index ccecdb1929..a36d219dd0 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -115,11 +115,11 @@ dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter echo "Error: Bootloader not found. Trying again in 5s." ;\ sleep 5 ;\ done -ifneq (, $(findstring 0.7, $(shell $(DFU_PROGRAMMER) --version 2>&1))) - $(DFU_PROGRAMMER) $(MCU) erase --force -else - $(DFU_PROGRAMMER) $(MCU) erase -endif + if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\ + $(DFU_PROGRAMMER) $(MCU) erase --force;\ + else\ + $(DFU_PROGRAMMER) $(MCU) erase;\ + fi $(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex $(DFU_PROGRAMMER) $(MCU) reset @@ -135,11 +135,11 @@ flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep -ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1))) - $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep -else - $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep -endif + if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\ + $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep;\ + else\ + $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep;\ + fi $(DFU_PROGRAMMER) $(MCU) reset # Convert hex to bin. -- cgit v1.2.3 From ba405cfbb4b887af8007edfeed4d9fc43766d911 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Mon, 10 Jul 2017 13:50:07 +0300 Subject: Don't search for TEENSY_LOADER_CLI if it's already defined --- tmk_core/avr.mk | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index a36d219dd0..6773726ee3 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -87,11 +87,13 @@ DEBUG_PORT = 4242 DEBUG_HOST = localhost #============================================================================ -# Autodecct teensy loader -ifneq (, $(shell which teensy-loader-cli 2>/dev/null)) - TEENSY_LOADER_CLI ?= teensy-loader-cli -else - TEENSY_LOADER_CLI ?= teensy_loader_cli +# Autodetect teensy loader +ifndef TEENSY_LOADER_CLI + ifneq (, $(shell which teensy-loader-cli 2>/dev/null)) + TEENSY_LOADER_CLI ?= teensy-loader-cli + else + TEENSY_LOADER_CLI ?= teensy_loader_cli + endif endif # Program the device. -- cgit v1.2.3 From 1ff5fb000f7d38f16710e753886d8bc9635d47e2 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Mon, 10 Jul 2017 13:04:27 +0300 Subject: Fix Makefile error_occured output for unit tests --- Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Makefile b/Makefile index f789409b7e..b429200fe8 100644 --- a/Makefile +++ b/Makefile @@ -483,6 +483,8 @@ define RUN_TEST +error_occurred=0;\ $($(TEST)_COMMAND)\ if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi; + + endef # Allow specifying just the subproject, in the keyboard directory, which will compile all keymaps -- cgit v1.2.3 From aca0f4dcaed3af3ae2ed689e3ae556269c3f6691 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 9 Jul 2017 13:20:03 +0300 Subject: Move GDISP drivers to /drivers/ugfx --- drivers/ugfx/gdisp/IS31FL3731C/driver.mk | 2 + drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c | 312 +++++++++++++++++++ drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h | 36 +++ drivers/ugfx/gdisp/st7565ergodox/driver.mk | 2 + .../ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c | 329 +++++++++++++++++++++ .../ugfx/gdisp/st7565ergodox/gdisp_lld_config.h | 27 ++ drivers/ugfx/gdisp/st7565ergodox/st7565.h | 39 +++ keyboards/ergodox/infinity/board_IS31FL3731C.h | 113 +++++++ keyboards/ergodox/infinity/board_ST7565.h | 113 +++++++ .../drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h | 113 ------- .../infinity/drivers/gdisp/IS31FL3731C/driver.mk | 2 - .../drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c | 312 ------------------- .../drivers/gdisp/IS31FL3731C/gdisp_lld_config.h | 36 --- .../drivers/gdisp/st7565ergodox/board_ST7565.h | 113 ------- .../infinity/drivers/gdisp/st7565ergodox/driver.mk | 2 - .../drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c | 329 --------------------- .../drivers/gdisp/st7565ergodox/gdisp_lld_config.h | 27 -- .../infinity/drivers/gdisp/st7565ergodox/st7565.h | 39 --- keyboards/ergodox/infinity/rules.mk | 4 +- keyboards/whitefox/board_IS31FL3731C.h | 109 +++++++ .../drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h | 109 ------- .../whitefox/drivers/gdisp/IS31FL3731C/driver.mk | 2 - .../drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c | 312 ------------------- .../drivers/gdisp/IS31FL3731C/gdisp_lld_config.h | 36 --- keyboards/whitefox/rules.mk | 2 +- 25 files changed, 1085 insertions(+), 1435 deletions(-) create mode 100644 drivers/ugfx/gdisp/IS31FL3731C/driver.mk create mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c create mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h create mode 100644 drivers/ugfx/gdisp/st7565ergodox/driver.mk create mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c create mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h create mode 100644 drivers/ugfx/gdisp/st7565ergodox/st7565.h create mode 100644 keyboards/ergodox/infinity/board_IS31FL3731C.h create mode 100644 keyboards/ergodox/infinity/board_ST7565.h delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h delete mode 100644 keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h create mode 100644 keyboards/whitefox/board_IS31FL3731C.h delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c delete mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h diff --git a/drivers/ugfx/gdisp/IS31FL3731C/driver.mk b/drivers/ugfx/gdisp/IS31FL3731C/driver.mk new file mode 100644 index 0000000000..58a16d2096 --- /dev/null +++ b/drivers/ugfx/gdisp/IS31FL3731C/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/ugfx/gdisp/IS31FL3731C +GFXSRC += drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c new file mode 100644 index 0000000000..2d78a5533c --- /dev/null +++ b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c @@ -0,0 +1,312 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX +#include "gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_IS31FL3731C.h" + + +// Can't include led_tables from here +extern const uint8_t CIE1931_CURVE[]; + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 9 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 16 +#endif +#ifndef GDISP_INITIAL_CONTRAST + #define GDISP_INITIAL_CONTRAST 0 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT + #define GDISP_INITIAL_BACKLIGHT 0 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#define IS31_ADDR_DEFAULT 0x74 + +#define IS31_REG_CONFIG 0x00 +// bits in reg +#define IS31_REG_CONFIG_PICTUREMODE 0x00 +#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 +#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 +// D2:D0 bits are starting frame for autoplay mode + +#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode + +#define IS31_REG_AUTOPLAYCTRL1 0x02 +// D6:D4 number of loops (000=infty) +// D2:D0 number of frames to be used + +#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) + +#define IS31_REG_DISPLAYOPT 0x05 +#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames +#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 +// D2:D0 bits blink period time (*0.27s) + +#define IS31_REG_AUDIOSYNC 0x06 +#define IS31_REG_AUDIOSYNC_ENABLE 0x1 + +#define IS31_REG_FRAMESTATE 0x07 + +#define IS31_REG_BREATHCTRL1 0x08 +// D6:D4 fade out time (26ms*2^i) +// D2:D0 fade in time (26ms*2^i) + +#define IS31_REG_BREATHCTRL2 0x09 +#define IS31_REG_BREATHCTRL2_ENABLE 0x10 +// D2:D0 extinguish time (3.5ms*2^i) + +#define IS31_REG_SHUTDOWN 0x0A +#define IS31_REG_SHUTDOWN_OFF 0x0 +#define IS31_REG_SHUTDOWN_ON 0x1 + +#define IS31_REG_AGCCTRL 0x0B +#define IS31_REG_ADCRATE 0x0C + +#define IS31_COMMANDREGISTER 0xFD +#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define IS31_FUNCTIONREG_SIZE 0xD + +#define IS31_FRAME_SIZE 0xB4 + +#define IS31_PWM_REG 0x24 +#define IS31_PWM_SIZE 0x90 + +#define IS31_LED_MASK_SIZE 0x12 +#define IS31_SCREEN_WIDTH 16 + +#define IS31 + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + uint8_t write_buffer_offset; + uint8_t write_buffer[IS31_FRAME_SIZE]; + uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; + uint8_t page; +}__attribute__((__packed__)) PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +static GFXINLINE void write_page(GDisplay* g, uint8_t page) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = IS31_COMMANDREGISTER; + tx[1] = page; + write_data(g, tx, 2); +} + +static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = reg; + tx[1] = data; + write_page(g, page); + write_data(g, tx, 2); +} + +static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { + PRIV(g)->write_buffer_offset = offset; + write_page(g, page); + write_data(g, (uint8_t*)PRIV(g), length + 1); +} + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + __builtin_memset(PRIV(g), 0, sizeof(PrivData)); + PRIV(g)->page = 0; + + // Initialise the board interface + init_board(g); + gfxSleepMilliseconds(10); + + // zero function page, all registers (assuming full_page is all zeroes) + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + set_hardware_shutdown(g, false); + gfxSleepMilliseconds(10); + // software shutdown + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + // zero function page, all registers + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + gfxSleepMilliseconds(10); + + + // zero all LED registers on all 8 pages, and enable the mask + __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); + for(uint8_t i=0; i<8; i++) { + write_ram(g, i, 0, IS31_FRAME_SIZE); + gfxSleepMilliseconds(1); + } + + // software shutdown disable (i.e. turn stuff on) + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + + // Finish Init + post_init_board(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOff; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + PRIV(g)->page++; + PRIV(g)->page %= 2; + // TODO: some smarter algorithm for this + // We should run only one physical page at a time + // This way we don't need to send so much data, and + // we could use slightly less memory + uint8_t* src = PRIV(g)->frame_buffer; + for (int y=0;yg.Backlight / 100; + PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; + ++src; + } + } + write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); + gfxSleepMilliseconds(1); + write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_DRAWPIXEL + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); + g->flags |= GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); + } +#endif + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + break; + case powerOn: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_BACKLIGHT: + if (g->g.Backlight == (unsigned)g->p.ptr) + return; + unsigned val = (unsigned)g->p.ptr; + g->g.Backlight = val > 100 ? 100 : val; + g->flags |= GDISP_FLG_NEEDFLUSH; + return; + } + } +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h new file mode 100644 index 0000000000..bb28ad775e --- /dev/null +++ b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h @@ -0,0 +1,36 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565ergodox/driver.mk b/drivers/ugfx/gdisp/st7565ergodox/driver.mk new file mode 100644 index 0000000000..401e15e691 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565ergodox/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/ugfx/gdisp/st7565ergodox +GFXSRC += drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c new file mode 100644 index 0000000000..c576280a12 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c @@ -0,0 +1,329 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX +#include "gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_ST7565.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT +#define GDISP_SCREEN_HEIGHT 32 +#endif +#ifndef GDISP_SCREEN_WIDTH +#define GDISP_SCREEN_WIDTH 128 +#endif +#ifndef GDISP_INITIAL_CONTRAST +#define GDISP_INITIAL_CONTRAST 35 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT +#define GDISP_INITIAL_BACKLIGHT 100 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#include "st7565.h" + +/*===========================================================================*/ +/* Driver config defaults for backward compatibility. */ +/*===========================================================================*/ +#ifndef ST7565_LCD_BIAS +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 +#endif +#ifndef ST7565_ADC +#define ST7565_ADC ST7565_ADC_NORMAL +#endif +#ifndef ST7565_COM_SCAN +#define ST7565_COM_SCAN ST7565_COM_SCAN_INC +#endif +#ifndef ST7565_PAGE_ORDER +#define ST7565_PAGE_ORDER 0,1,2,3 +#endif + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + bool_t buffer2; + uint8_t data_pos; + uint8_t data[16]; + uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; +}PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) +#define RAM(g) (PRIV(g)->ram) + +static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { + PRIV(g)->data[PRIV(g)->data_pos++] = cmd; +} + +static GFXINLINE void flush_cmd(GDisplay* g) { + write_data(g, PRIV(g)->data, PRIV(g)->data_pos); + PRIV(g)->data_pos = 0; +} + +#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } +#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } + +// Some common routines and macros +#define delay(us) gfxSleepMicroseconds(us) +#define delay_ms(ms) gfxSleepMilliseconds(ms) + +#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) +#define xybit(y) (1<<((y)&7)) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/* + * As this controller can't update on a pixel boundary we need to maintain the + * the entire display surface in memory so that we can do the necessary bit + * operations. Fortunately it is a small display in monochrome. + * 64 * 128 / 8 = 1024 bytes. + */ + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + PRIV(g)->buffer2 = false; + PRIV(g)->data_pos = 0; + + // Initialise the board interface + init_board(g); + + // Hardware reset + setpin_reset(g, TRUE); + gfxSleepMilliseconds(20); + setpin_reset(g, FALSE); + gfxSleepMilliseconds(20); + acquire_bus(g); + enter_cmd_mode(g); + + write_cmd(g, ST7565_RESET); + write_cmd(g, ST7565_LCD_BIAS); + write_cmd(g, ST7565_ADC); + write_cmd(g, ST7565_COM_SCAN); + + write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); + write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST); + + // turn on internal power supply (VC=1, VR=1, VF=1) + write_cmd(g, ST7565_POWER_CONTROL | 0x07); + + write_cmd(g, ST7565_INVERT_DISPLAY); + write_cmd(g, ST7565_ALLON_NORMAL); + + write_cmd(g, ST7565_START_LINE | 0); + write_cmd(g, ST7565_RMW); + flush_cmd(g); + + // Finish Init + post_init_board(g); + + // Release the bus + release_bus(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOff; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH +LLDSPEC void gdisp_lld_flush(GDisplay *g) { + unsigned p; + + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + acquire_bus(g); + enter_cmd_mode(g); + unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); + for (p = 0; p < 4; p++) { + write_cmd(g, ST7565_PAGE | (p + dstOffset)); + write_cmd(g, ST7565_COLUMN_MSB | 0); + write_cmd(g, ST7565_COLUMN_LSB | 0); + write_cmd(g, ST7565_RMW); + flush_cmd(g); + enter_data_mode(g); + write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); + enter_cmd_mode(g); + } + unsigned line = (PRIV(g)->buffer2 ? 32 : 0); + write_cmd(g, ST7565_START_LINE | line); + flush_cmd(g); + PRIV(g)->buffer2 = !PRIV(g)->buffer2; + release_bus(g); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; +} +#endif + +#if GDISP_HARDWARE_DRAWPIXEL +LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + if (gdispColor2Native(g->p.color) != Black) + RAM(g)[xyaddr(x, y)] |= xybit(y); + else + RAM(g)[xyaddr(x, y)] &= ~xybit(y); + g->flags |= GDISP_FLG_NEEDFLUSH; +} +#endif + +#if GDISP_HARDWARE_PIXELREAD +LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; +} +#endif + +LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { + uint8_t* buffer = (uint8_t*)g->p.ptr; + int linelength = g->p.cx; + for (int i = 0; i < g->p.cy; i++) { + unsigned dstx = g->p.x; + unsigned dsty = g->p.y + i; + unsigned srcx = g->p.x1; + unsigned srcy = g->p.y1 + i; + unsigned srcbit = srcy * g->p.x2 + srcx; + for(int j=0; j < linelength; j++) { + uint8_t src = buffer[srcbit / 8]; + uint8_t bit = 7-(srcbit % 8); + uint8_t bitset = (src >> bit) & 1; + uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]); + if (bitset) { + *dst |= xybit(dsty); + } + else { + *dst &= ~xybit(dsty); + } + dstx++; + srcbit++; + } + } + g->flags |= GDISP_FLG_NEEDFLUSH; +} + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL +LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + acquire_bus(g); + enter_cmd_mode(g); + write_cmd(g, ST7565_DISPLAY_OFF); + flush_cmd(g); + release_bus(g); + break; + case powerOn: + acquire_bus(g); + enter_cmd_mode(g); + write_cmd(g, ST7565_DISPLAY_ON); + flush_cmd(g); + release_bus(g); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_CONTRAST: + g->g.Contrast = (unsigned)g->p.ptr & 63; + acquire_bus(g); + enter_cmd_mode(g); + write_cmd2(g, ST7565_CONTRAST, g->g.Contrast); + flush_cmd(g); + release_bus(g); + return; + } +} +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h new file mode 100644 index 0000000000..2b66a877c8 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h @@ -0,0 +1,27 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_HARDWARE_BITFILLS TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565ergodox/st7565.h b/drivers/ugfx/gdisp/st7565ergodox/st7565.h new file mode 100644 index 0000000000..24924ff050 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565ergodox/st7565.h @@ -0,0 +1,39 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _ST7565_H +#define _ST7565_H + +#define ST7565_CONTRAST 0x81 +#define ST7565_ALLON_NORMAL 0xA4 +#define ST7565_ALLON 0xA5 +#define ST7565_POSITIVE_DISPLAY 0xA6 +#define ST7565_INVERT_DISPLAY 0xA7 +#define ST7565_DISPLAY_OFF 0xAE +#define ST7565_DISPLAY_ON 0xAF + +#define ST7565_LCD_BIAS_7 0xA3 +#define ST7565_LCD_BIAS_9 0xA2 + +#define ST7565_ADC_NORMAL 0xA0 +#define ST7565_ADC_REVERSE 0xA1 + +#define ST7565_COM_SCAN_INC 0xC0 +#define ST7565_COM_SCAN_DEC 0xC8 + +#define ST7565_START_LINE 0x40 +#define ST7565_PAGE 0xB0 +#define ST7565_COLUMN_MSB 0x10 +#define ST7565_COLUMN_LSB 0x00 +#define ST7565_RMW 0xE0 + +#define ST7565_RESISTOR_RATIO 0x20 +#define ST7565_POWER_CONTROL 0x28 + +#define ST7565_RESET 0xE2 + +#endif /* _ST7565_H */ diff --git a/keyboards/ergodox/infinity/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_IS31FL3731C.h new file mode 100644 index 0000000000..2ea73f1fb3 --- /dev/null +++ b/keyboards/ergodox/infinity/board_IS31FL3731C.h @@ -0,0 +1,113 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +#define GDISP_SCREEN_WIDTH 7 +#define GDISP_SCREEN_HEIGHT 7 + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0x3F, 0x00, /* C5-1 -> C5-16 */ + 0x00, 0x00, /* C6-1 -> C6-16 */ + 0x00, 0x00, /* C7-1 -> C7-16 */ + 0x00, 0x00, /* C8-1 -> C8-16 */ + 0x00, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 45 44 43 42 41 40 39 + { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, +// 52 51 50 49 48 47 46 + { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, +// 58 57 56 55 54 53 N/A + { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, +// 67 66 65 64 63 62 61 + { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, +// 76 75 74 73 72 60 59 + { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, +// N/A N/A N/A N/A N/A N/A 68 + { NA, NA, NA, NA, NA, NA, LA(5, 4) }, +// N/A N/A N/A N/A 71 70 69 + { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/board_ST7565.h b/keyboards/ergodox/infinity/board_ST7565.h new file mode 100644 index 0000000000..9650ffb440 --- /dev/null +++ b/keyboards/ergodox/infinity/board_ST7565.h @@ -0,0 +1,113 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 +#define ST7565_ADC ST7565_ADC_NORMAL +#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC +#define ST7565_PAGE_ORDER 0,1,2,3 +/* + * Custom page order for several LCD boards, e.g. HEM12864-99 + * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 + */ + +#define ST7565_GPIOPORT GPIOC +#define ST7565_PORT PORTC +#define ST7565_A0_PIN 7 +#define ST7565_RST_PIN 8 +#define ST7565_MOSI_PIN 6 +#define ST7565_SLCK_PIN 5 +#define ST7565_SS_PIN 4 + +#define palSetPadModeRaw(portname, bits) \ + ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits + +#define palSetPadModeNamed(portname, portmode) \ + palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) + +#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) +// DSPI Clock and Transfer Attributes +// Frame Size: 8 bits +// MSB First +// CLK Low by default +static const SPIConfig spi1config = { + // Operation complete callback or @p NULL. + .end_cb = NULL, + //The chip select line port - when not using pcs. + .ssport = ST7565_GPIOPORT, + // brief The chip select line pad number - when not using pcs. + .sspad=ST7565_SS_PIN, + // SPI initialization data. + .tar0 = + SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes + | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns + | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns + | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns + | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 + | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns +}; + +static GFXINLINE void acquire_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to acquire + // spiAcquireBus(&SPID1); + spiSelect(&SPID1); +} + +static GFXINLINE void release_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to release + //spiReleaseBus(&SPID1); + spiUnselect(&SPID1); +} + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); + palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + palSetPadModeRaw(MOSI, ST7565_SPI_MODE); + palSetPadModeRaw(SLCK, ST7565_SPI_MODE); + palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL); + + spiInit(); + spiStart(&SPID1, &spi1config); + release_bus(g); +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + if (state) { + palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } + else { + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } +} + +static GFXINLINE void enter_data_mode(GDisplay *g) { + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); +} + +static GFXINLINE void enter_cmd_mode(GDisplay *g) { + palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); +} + + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + spiSend(&SPID1, length, data); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h deleted file mode 100644 index 2ea73f1fb3..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h +++ /dev/null @@ -1,113 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -#define GDISP_SCREEN_WIDTH 7 -#define GDISP_SCREEN_HEIGHT 7 - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0x3F, 0x00, /* C5-1 -> C5-16 */ - 0x00, 0x00, /* C6-1 -> C6-16 */ - 0x00, 0x00, /* C7-1 -> C7-16 */ - 0x00, 0x00, /* C8-1 -> C8-16 */ - 0x00, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16 ) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { -// 45 44 43 42 41 40 39 - { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, -// 52 51 50 49 48 47 46 - { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, -// 58 57 56 55 54 53 N/A - { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, -// 67 66 65 64 63 62 61 - { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, -// 76 75 74 73 72 60 59 - { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, -// N/A N/A N/A N/A N/A N/A 68 - { NA, NA, NA, NA, NA, NA, LA(5, 4) }, -// N/A N/A N/A N/A 71 70 69 - { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, -}; - - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void) g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) -{ - (void) g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void) g; - if(!shutdown) { - palSetPad(GPIOB, 16); - } - else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk deleted file mode 100644 index f32d0d8685..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/IS31FL3731C -GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c deleted file mode 100644 index b4a5c84b0a..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c +++ /dev/null @@ -1,312 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX -#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_IS31FL3731C.h" - - -// Can't include led_tables from here -extern const uint8_t CIE1931_CURVE[]; - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 -#endif -#ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 0 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#define IS31_ADDR_DEFAULT 0x74 - -#define IS31_REG_CONFIG 0x00 -// bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -#define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -#define IS31_REG_DISPLAYOPT 0x05 -#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -#define IS31_REG_AUDIOSYNC 0x06 -#define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -#define IS31_REG_FRAMESTATE 0x07 - -#define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -#define IS31_REG_BREATHCTRL2 0x09 -#define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -#define IS31_REG_SHUTDOWN 0x0A -#define IS31_REG_SHUTDOWN_OFF 0x0 -#define IS31_REG_SHUTDOWN_ON 0x1 - -#define IS31_REG_AGCCTRL 0x0B -#define IS31_REG_ADCRATE 0x0C - -#define IS31_COMMANDREGISTER 0xFD -#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -#define IS31_FUNCTIONREG_SIZE 0xD - -#define IS31_FRAME_SIZE 0xB4 - -#define IS31_PWM_REG 0x24 -#define IS31_PWM_SIZE 0x90 - -#define IS31_LED_MASK_SIZE 0x12 -#define IS31_SCREEN_WIDTH 16 - -#define IS31 - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -}__attribute__((__packed__)) PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay* g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t*)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for(uint8_t i=0; i<8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t* src = PRIV(g)->frame_buffer; - for (int y=0;yg.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); - } -#endif - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) - return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; - g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } - } -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h deleted file mode 100644 index bb28ad775e..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h deleted file mode 100644 index 9650ffb440..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 -#define ST7565_ADC ST7565_ADC_NORMAL -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0,1,2,3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_GPIOPORT GPIOC -#define ST7565_PORT PORTC -#define ST7565_A0_PIN 7 -#define ST7565_RST_PIN 8 -#define ST7565_MOSI_PIN 6 -#define ST7565_SLCK_PIN 5 -#define ST7565_SS_PIN 4 - -#define palSetPadModeRaw(portname, bits) \ - ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits - -#define palSetPadModeNamed(portname, portmode) \ - palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) - -#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - // Operation complete callback or @p NULL. - .end_cb = NULL, - //The chip select line port - when not using pcs. - .ssport = ST7565_GPIOPORT, - // brief The chip select line pad number - when not using pcs. - .sspad=ST7565_SS_PIN, - // SPI initialization data. - .tar0 = - SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes - | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns - | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns - | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns - | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 - | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns -}; - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); - spiSelect(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to release - //spiReleaseBus(&SPID1); - spiUnselect(&SPID1); -} - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); - palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - palSetPadModeRaw(MOSI, ST7565_SPI_MODE); - palSetPadModeRaw(SLCK, ST7565_SPI_MODE); - palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL); - - spiInit(); - spiStart(&SPID1, &spi1config); - release_bus(g); -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - if (state) { - palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } - else { - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } -} - -static GFXINLINE void enter_data_mode(GDisplay *g) { - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); -} - -static GFXINLINE void enter_cmd_mode(GDisplay *g) { - palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); -} - - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk deleted file mode 100644 index 889a1a0317..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/st7565ergodox -GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c deleted file mode 100644 index b04ad02935..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX -#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_ST7565.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT -#define GDISP_SCREEN_HEIGHT 32 -#endif -#ifndef GDISP_SCREEN_WIDTH -#define GDISP_SCREEN_WIDTH 128 -#endif -#ifndef GDISP_INITIAL_CONTRAST -#define GDISP_INITIAL_CONTRAST 35 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT -#define GDISP_INITIAL_BACKLIGHT 100 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#include "drivers/gdisp/st7565ergodox/st7565.h" - -/*===========================================================================*/ -/* Driver config defaults for backward compatibility. */ -/*===========================================================================*/ -#ifndef ST7565_LCD_BIAS -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#endif -#ifndef ST7565_ADC -#define ST7565_ADC ST7565_ADC_NORMAL -#endif -#ifndef ST7565_COM_SCAN -#define ST7565_COM_SCAN ST7565_COM_SCAN_INC -#endif -#ifndef ST7565_PAGE_ORDER -#define ST7565_PAGE_ORDER 0,1,2,3 -#endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - bool_t buffer2; - uint8_t data_pos; - uint8_t data[16]; - uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; -}PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) -#define RAM(g) (PRIV(g)->ram) - -static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { - PRIV(g)->data[PRIV(g)->data_pos++] = cmd; -} - -static GFXINLINE void flush_cmd(GDisplay* g) { - write_data(g, PRIV(g)->data, PRIV(g)->data_pos); - PRIV(g)->data_pos = 0; -} - -#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } -#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } - -// Some common routines and macros -#define delay(us) gfxSleepMicroseconds(us) -#define delay_ms(ms) gfxSleepMilliseconds(ms) - -#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) -#define xybit(y) (1<<((y)&7)) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* - * As this controller can't update on a pixel boundary we need to maintain the - * the entire display surface in memory so that we can do the necessary bit - * operations. Fortunately it is a small display in monochrome. - * 64 * 128 / 8 = 1024 bytes. - */ - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - PRIV(g)->buffer2 = false; - PRIV(g)->data_pos = 0; - - // Initialise the board interface - init_board(g); - - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); - acquire_bus(g); - enter_cmd_mode(g); - - write_cmd(g, ST7565_RESET); - write_cmd(g, ST7565_LCD_BIAS); - write_cmd(g, ST7565_ADC); - write_cmd(g, ST7565_COM_SCAN); - - write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); - write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST); - - // turn on internal power supply (VC=1, VR=1, VF=1) - write_cmd(g, ST7565_POWER_CONTROL | 0x07); - - write_cmd(g, ST7565_INVERT_DISPLAY); - write_cmd(g, ST7565_ALLON_NORMAL); - - write_cmd(g, ST7565_START_LINE | 0); - write_cmd(g, ST7565_RMW); - flush_cmd(g); - - // Finish Init - post_init_board(g); - - // Release the bus - release_bus(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH -LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; - - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - acquire_bus(g); - enter_cmd_mode(g); - unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); - for (p = 0; p < 4; p++) { - write_cmd(g, ST7565_PAGE | (p + dstOffset)); - write_cmd(g, ST7565_COLUMN_MSB | 0); - write_cmd(g, ST7565_COLUMN_LSB | 0); - write_cmd(g, ST7565_RMW); - flush_cmd(g); - enter_data_mode(g); - write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); - enter_cmd_mode(g); - } - unsigned line = (PRIV(g)->buffer2 ? 32 : 0); - write_cmd(g, ST7565_START_LINE | line); - flush_cmd(g); - PRIV(g)->buffer2 = !PRIV(g)->buffer2; - release_bus(g); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; -} -#endif - -#if GDISP_HARDWARE_DRAWPIXEL -LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - if (gdispColor2Native(g->p.color) != Black) - RAM(g)[xyaddr(x, y)] |= xybit(y); - else - RAM(g)[xyaddr(x, y)] &= ~xybit(y); - g->flags |= GDISP_FLG_NEEDFLUSH; -} -#endif - -#if GDISP_HARDWARE_PIXELREAD -LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; -} -#endif - -LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { - uint8_t* buffer = (uint8_t*)g->p.ptr; - int linelength = g->p.cx; - for (int i = 0; i < g->p.cy; i++) { - unsigned dstx = g->p.x; - unsigned dsty = g->p.y + i; - unsigned srcx = g->p.x1; - unsigned srcy = g->p.y1 + i; - unsigned srcbit = srcy * g->p.x2 + srcx; - for(int j=0; j < linelength; j++) { - uint8_t src = buffer[srcbit / 8]; - uint8_t bit = 7-(srcbit % 8); - uint8_t bitset = (src >> bit) & 1; - uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]); - if (bitset) { - *dst |= xybit(dsty); - } - else { - *dst &= ~xybit(dsty); - } - dstx++; - srcbit++; - } - } - g->flags |= GDISP_FLG_NEEDFLUSH; -} - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL -LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - acquire_bus(g); - enter_cmd_mode(g); - write_cmd(g, ST7565_DISPLAY_OFF); - flush_cmd(g); - release_bus(g); - break; - case powerOn: - acquire_bus(g); - enter_cmd_mode(g); - write_cmd(g, ST7565_DISPLAY_ON); - flush_cmd(g); - release_bus(g); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - g->g.Contrast = (unsigned)g->p.ptr & 63; - acquire_bus(g); - enter_cmd_mode(g); - write_cmd2(g, ST7565_CONTRAST, g->g.Contrast); - flush_cmd(g); - release_bus(g); - return; - } -} -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h deleted file mode 100644 index 2b66a877c8..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE -#define GDISP_HARDWARE_BITFILLS TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h deleted file mode 100644 index 24924ff050..0000000000 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _ST7565_H -#define _ST7565_H - -#define ST7565_CONTRAST 0x81 -#define ST7565_ALLON_NORMAL 0xA4 -#define ST7565_ALLON 0xA5 -#define ST7565_POSITIVE_DISPLAY 0xA6 -#define ST7565_INVERT_DISPLAY 0xA7 -#define ST7565_DISPLAY_OFF 0xAE -#define ST7565_DISPLAY_ON 0xAF - -#define ST7565_LCD_BIAS_7 0xA3 -#define ST7565_LCD_BIAS_9 0xA2 - -#define ST7565_ADC_NORMAL 0xA0 -#define ST7565_ADC_REVERSE 0xA1 - -#define ST7565_COM_SCAN_INC 0xC0 -#define ST7565_COM_SCAN_DEC 0xC8 - -#define ST7565_START_LINE 0x40 -#define ST7565_PAGE 0xB0 -#define ST7565_COLUMN_MSB 0x10 -#define ST7565_COLUMN_LSB 0x00 -#define ST7565_RMW 0xE0 - -#define ST7565_RESISTOR_RATIO 0x20 -#define ST7565_POWER_CONTROL 0x28 - -#define ST7565_RESET 0xE2 - -#endif /* _ST7565_H */ diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index bbb0f6efea..9e22463637 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -67,5 +67,5 @@ LCD_BACKLIGHT_ENABLE = yes MIDI_ENABLE = no RGBLIGHT_ENABLE = no -include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk -include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk \ No newline at end of file +include $(TOP_DIR)/drivers/ugfx/gdisp/st7565ergodox/driver.mk +include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk \ No newline at end of file diff --git a/keyboards/whitefox/board_IS31FL3731C.h b/keyboards/whitefox/board_IS31FL3731C.h new file mode 100644 index 0000000000..3dc5327a58 --- /dev/null +++ b/keyboards/whitefox/board_IS31FL3731C.h @@ -0,0 +1,109 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +#define GDISP_SCREEN_WIDTH 16 +#define GDISP_SCREEN_HEIGHT 5 + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0xFF, 0x00, /* C5-1 -> C5-16 */ + 0xFF, 0x00, /* C6-1 -> C6-16 */ + 0xFF, 0x00, /* C7-1 -> C7-16 */ + 0xFF, 0x00, /* C8-1 -> C8-16 */ + 0xFE, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)}, +// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)}, +// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 + { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)}, +// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 + { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)}, +// 62 63 64 65 66 67 68 69 70 71 + { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)}, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h deleted file mode 100644 index 3dc5327a58..0000000000 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h +++ /dev/null @@ -1,109 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -#define GDISP_SCREEN_WIDTH 16 -#define GDISP_SCREEN_HEIGHT 5 - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0xFF, 0x00, /* C5-1 -> C5-16 */ - 0xFF, 0x00, /* C6-1 -> C6-16 */ - 0xFF, 0x00, /* C7-1 -> C7-16 */ - 0xFF, 0x00, /* C8-1 -> C8-16 */ - 0xFE, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16 ) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { -// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)}, -// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)}, -// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 - { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)}, -// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 - { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)}, -// 62 63 64 65 66 67 68 69 70 71 - { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)}, -}; - - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void) g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) -{ - (void) g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void) g; - if(!shutdown) { - palSetPad(GPIOB, 16); - } - else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk deleted file mode 100644 index f32d0d8685..0000000000 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/gdisp/IS31FL3731C -GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c deleted file mode 100644 index c807cbd1e2..0000000000 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c +++ /dev/null @@ -1,312 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_WHITEFOX -#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_IS31FL3731C.h" - - -// Can't include led_tables from here -extern const uint8_t CIE1931_CURVE[]; - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 -#endif -#ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 0 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#define IS31_ADDR_DEFAULT 0x74 - -#define IS31_REG_CONFIG 0x00 -// bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -#define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -#define IS31_REG_DISPLAYOPT 0x05 -#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -#define IS31_REG_AUDIOSYNC 0x06 -#define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -#define IS31_REG_FRAMESTATE 0x07 - -#define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -#define IS31_REG_BREATHCTRL2 0x09 -#define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -#define IS31_REG_SHUTDOWN 0x0A -#define IS31_REG_SHUTDOWN_OFF 0x0 -#define IS31_REG_SHUTDOWN_ON 0x1 - -#define IS31_REG_AGCCTRL 0x0B -#define IS31_REG_ADCRATE 0x0C - -#define IS31_COMMANDREGISTER 0xFD -#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -#define IS31_FUNCTIONREG_SIZE 0xD - -#define IS31_FRAME_SIZE 0xB4 - -#define IS31_PWM_REG 0x24 -#define IS31_PWM_SIZE 0x90 - -#define IS31_LED_MASK_SIZE 0x12 -#define IS31_SCREEN_WIDTH 16 - -#define IS31 - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -}__attribute__((__packed__)) PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay* g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t*)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for(uint8_t i=0; i<8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t* src = PRIV(g)->frame_buffer; - for (int y=0;yg.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); - } -#endif - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) - return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; - g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } - } -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h deleted file mode 100644 index bb28ad775e..0000000000 --- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index fb34dbb9a4..4cf23a3900 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -70,4 +70,4 @@ CUSTOM_MATRIX = yes # Custom matrix file BACKLIGHT_ENABLE = yes VISUALIZER_ENABLE = yes -include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk +include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk -- cgit v1.2.3 From 630f065376618d94f4616687629aadb3ee91e562 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 9 Jul 2017 13:37:24 +0300 Subject: Remove ergodox from gdisp driver names --- drivers/ugfx/gdisp/IS31FL3731C/driver.mk | 2 - drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c | 312 ------------------- drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h | 36 --- drivers/ugfx/gdisp/is31fl3731c/driver.mk | 2 + drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c | 312 +++++++++++++++++++ drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h | 36 +++ drivers/ugfx/gdisp/st7565/driver.mk | 2 + drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c | 329 +++++++++++++++++++++ drivers/ugfx/gdisp/st7565/gdisp_lld_config.h | 27 ++ drivers/ugfx/gdisp/st7565/st7565.h | 39 +++ drivers/ugfx/gdisp/st7565ergodox/driver.mk | 2 - .../ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c | 329 --------------------- .../ugfx/gdisp/st7565ergodox/gdisp_lld_config.h | 27 -- drivers/ugfx/gdisp/st7565ergodox/st7565.h | 39 --- keyboards/ergodox/infinity/gfxconf.h | 2 +- keyboards/ergodox/infinity/rules.mk | 4 +- keyboards/whitefox/gfxconf.h | 2 +- keyboards/whitefox/rules.mk | 2 +- 18 files changed, 752 insertions(+), 752 deletions(-) delete mode 100644 drivers/ugfx/gdisp/IS31FL3731C/driver.mk delete mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c delete mode 100644 drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h create mode 100644 drivers/ugfx/gdisp/is31fl3731c/driver.mk create mode 100644 drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c create mode 100644 drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h create mode 100644 drivers/ugfx/gdisp/st7565/driver.mk create mode 100644 drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c create mode 100644 drivers/ugfx/gdisp/st7565/gdisp_lld_config.h create mode 100644 drivers/ugfx/gdisp/st7565/st7565.h delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/driver.mk delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h delete mode 100644 drivers/ugfx/gdisp/st7565ergodox/st7565.h diff --git a/drivers/ugfx/gdisp/IS31FL3731C/driver.mk b/drivers/ugfx/gdisp/IS31FL3731C/driver.mk deleted file mode 100644 index 58a16d2096..0000000000 --- a/drivers/ugfx/gdisp/IS31FL3731C/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/ugfx/gdisp/IS31FL3731C -GFXSRC += drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c deleted file mode 100644 index 2d78a5533c..0000000000 --- a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c +++ /dev/null @@ -1,312 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX -#include "gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_IS31FL3731C.h" - - -// Can't include led_tables from here -extern const uint8_t CIE1931_CURVE[]; - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 -#endif -#ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 0 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#define IS31_ADDR_DEFAULT 0x74 - -#define IS31_REG_CONFIG 0x00 -// bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -#define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -#define IS31_REG_DISPLAYOPT 0x05 -#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -#define IS31_REG_AUDIOSYNC 0x06 -#define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -#define IS31_REG_FRAMESTATE 0x07 - -#define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -#define IS31_REG_BREATHCTRL2 0x09 -#define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -#define IS31_REG_SHUTDOWN 0x0A -#define IS31_REG_SHUTDOWN_OFF 0x0 -#define IS31_REG_SHUTDOWN_ON 0x1 - -#define IS31_REG_AGCCTRL 0x0B -#define IS31_REG_ADCRATE 0x0C - -#define IS31_COMMANDREGISTER 0xFD -#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -#define IS31_FUNCTIONREG_SIZE 0xD - -#define IS31_FRAME_SIZE 0xB4 - -#define IS31_PWM_REG 0x24 -#define IS31_PWM_SIZE 0x90 - -#define IS31_LED_MASK_SIZE 0x12 -#define IS31_SCREEN_WIDTH 16 - -#define IS31 - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -}__attribute__((__packed__)) PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay* g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t*)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for(uint8_t i=0; i<8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t* src = PRIV(g)->frame_buffer; - for (int y=0;yg.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; - } -#endif - -#if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); - } -#endif - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) - return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; - g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } - } -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h b/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h deleted file mode 100644 index bb28ad775e..0000000000 --- a/drivers/ugfx/gdisp/IS31FL3731C/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/is31fl3731c/driver.mk b/drivers/ugfx/gdisp/is31fl3731c/driver.mk new file mode 100644 index 0000000000..c9de62d1e8 --- /dev/null +++ b/drivers/ugfx/gdisp/is31fl3731c/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/ugfx/gdisp/is31fl3731c +GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c new file mode 100644 index 0000000000..c55dd0a0ea --- /dev/null +++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c @@ -0,0 +1,312 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK +#include "gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_IS31FL3731C.h" + + +// Can't include led_tables from here +extern const uint8_t CIE1931_CURVE[]; + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 9 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 16 +#endif +#ifndef GDISP_INITIAL_CONTRAST + #define GDISP_INITIAL_CONTRAST 0 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT + #define GDISP_INITIAL_BACKLIGHT 0 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#define IS31_ADDR_DEFAULT 0x74 + +#define IS31_REG_CONFIG 0x00 +// bits in reg +#define IS31_REG_CONFIG_PICTUREMODE 0x00 +#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 +#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 +// D2:D0 bits are starting frame for autoplay mode + +#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode + +#define IS31_REG_AUTOPLAYCTRL1 0x02 +// D6:D4 number of loops (000=infty) +// D2:D0 number of frames to be used + +#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) + +#define IS31_REG_DISPLAYOPT 0x05 +#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames +#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 +// D2:D0 bits blink period time (*0.27s) + +#define IS31_REG_AUDIOSYNC 0x06 +#define IS31_REG_AUDIOSYNC_ENABLE 0x1 + +#define IS31_REG_FRAMESTATE 0x07 + +#define IS31_REG_BREATHCTRL1 0x08 +// D6:D4 fade out time (26ms*2^i) +// D2:D0 fade in time (26ms*2^i) + +#define IS31_REG_BREATHCTRL2 0x09 +#define IS31_REG_BREATHCTRL2_ENABLE 0x10 +// D2:D0 extinguish time (3.5ms*2^i) + +#define IS31_REG_SHUTDOWN 0x0A +#define IS31_REG_SHUTDOWN_OFF 0x0 +#define IS31_REG_SHUTDOWN_ON 0x1 + +#define IS31_REG_AGCCTRL 0x0B +#define IS31_REG_ADCRATE 0x0C + +#define IS31_COMMANDREGISTER 0xFD +#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define IS31_FUNCTIONREG_SIZE 0xD + +#define IS31_FRAME_SIZE 0xB4 + +#define IS31_PWM_REG 0x24 +#define IS31_PWM_SIZE 0x90 + +#define IS31_LED_MASK_SIZE 0x12 +#define IS31_SCREEN_WIDTH 16 + +#define IS31 + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + uint8_t write_buffer_offset; + uint8_t write_buffer[IS31_FRAME_SIZE]; + uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; + uint8_t page; +}__attribute__((__packed__)) PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +static GFXINLINE void write_page(GDisplay* g, uint8_t page) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = IS31_COMMANDREGISTER; + tx[1] = page; + write_data(g, tx, 2); +} + +static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = reg; + tx[1] = data; + write_page(g, page); + write_data(g, tx, 2); +} + +static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { + PRIV(g)->write_buffer_offset = offset; + write_page(g, page); + write_data(g, (uint8_t*)PRIV(g), length + 1); +} + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + __builtin_memset(PRIV(g), 0, sizeof(PrivData)); + PRIV(g)->page = 0; + + // Initialise the board interface + init_board(g); + gfxSleepMilliseconds(10); + + // zero function page, all registers (assuming full_page is all zeroes) + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + set_hardware_shutdown(g, false); + gfxSleepMilliseconds(10); + // software shutdown + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + // zero function page, all registers + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + gfxSleepMilliseconds(10); + + + // zero all LED registers on all 8 pages, and enable the mask + __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); + for(uint8_t i=0; i<8; i++) { + write_ram(g, i, 0, IS31_FRAME_SIZE); + gfxSleepMilliseconds(1); + } + + // software shutdown disable (i.e. turn stuff on) + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + + // Finish Init + post_init_board(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOff; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + PRIV(g)->page++; + PRIV(g)->page %= 2; + // TODO: some smarter algorithm for this + // We should run only one physical page at a time + // This way we don't need to send so much data, and + // we could use slightly less memory + uint8_t* src = PRIV(g)->frame_buffer; + for (int y=0;yg.Backlight / 100; + PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; + ++src; + } + } + write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); + gfxSleepMilliseconds(1); + write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_DRAWPIXEL + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); + g->flags |= GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); + } +#endif + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + break; + case powerOn: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_BACKLIGHT: + if (g->g.Backlight == (unsigned)g->p.ptr) + return; + unsigned val = (unsigned)g->p.ptr; + g->g.Backlight = val > 100 ? 100 : val; + g->flags |= GDISP_FLG_NEEDFLUSH; + return; + } + } +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h new file mode 100644 index 0000000000..bb28ad775e --- /dev/null +++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h @@ -0,0 +1,36 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk new file mode 100644 index 0000000000..0190b60194 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/ugfx/gdisp/st7565 +GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c new file mode 100644 index 0000000000..69c5747728 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c @@ -0,0 +1,329 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK +#include "gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_ST7565.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT +#define GDISP_SCREEN_HEIGHT 32 +#endif +#ifndef GDISP_SCREEN_WIDTH +#define GDISP_SCREEN_WIDTH 128 +#endif +#ifndef GDISP_INITIAL_CONTRAST +#define GDISP_INITIAL_CONTRAST 35 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT +#define GDISP_INITIAL_BACKLIGHT 100 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#include "st7565.h" + +/*===========================================================================*/ +/* Driver config defaults for backward compatibility. */ +/*===========================================================================*/ +#ifndef ST7565_LCD_BIAS +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 +#endif +#ifndef ST7565_ADC +#define ST7565_ADC ST7565_ADC_NORMAL +#endif +#ifndef ST7565_COM_SCAN +#define ST7565_COM_SCAN ST7565_COM_SCAN_INC +#endif +#ifndef ST7565_PAGE_ORDER +#define ST7565_PAGE_ORDER 0,1,2,3 +#endif + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + bool_t buffer2; + uint8_t data_pos; + uint8_t data[16]; + uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; +}PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) +#define RAM(g) (PRIV(g)->ram) + +static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { + PRIV(g)->data[PRIV(g)->data_pos++] = cmd; +} + +static GFXINLINE void flush_cmd(GDisplay* g) { + write_data(g, PRIV(g)->data, PRIV(g)->data_pos); + PRIV(g)->data_pos = 0; +} + +#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } +#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } + +// Some common routines and macros +#define delay(us) gfxSleepMicroseconds(us) +#define delay_ms(ms) gfxSleepMilliseconds(ms) + +#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) +#define xybit(y) (1<<((y)&7)) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/* + * As this controller can't update on a pixel boundary we need to maintain the + * the entire display surface in memory so that we can do the necessary bit + * operations. Fortunately it is a small display in monochrome. + * 64 * 128 / 8 = 1024 bytes. + */ + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + PRIV(g)->buffer2 = false; + PRIV(g)->data_pos = 0; + + // Initialise the board interface + init_board(g); + + // Hardware reset + setpin_reset(g, TRUE); + gfxSleepMilliseconds(20); + setpin_reset(g, FALSE); + gfxSleepMilliseconds(20); + acquire_bus(g); + enter_cmd_mode(g); + + write_cmd(g, ST7565_RESET); + write_cmd(g, ST7565_LCD_BIAS); + write_cmd(g, ST7565_ADC); + write_cmd(g, ST7565_COM_SCAN); + + write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); + write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST); + + // turn on internal power supply (VC=1, VR=1, VF=1) + write_cmd(g, ST7565_POWER_CONTROL | 0x07); + + write_cmd(g, ST7565_INVERT_DISPLAY); + write_cmd(g, ST7565_ALLON_NORMAL); + + write_cmd(g, ST7565_START_LINE | 0); + write_cmd(g, ST7565_RMW); + flush_cmd(g); + + // Finish Init + post_init_board(g); + + // Release the bus + release_bus(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOff; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH +LLDSPEC void gdisp_lld_flush(GDisplay *g) { + unsigned p; + + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + acquire_bus(g); + enter_cmd_mode(g); + unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); + for (p = 0; p < 4; p++) { + write_cmd(g, ST7565_PAGE | (p + dstOffset)); + write_cmd(g, ST7565_COLUMN_MSB | 0); + write_cmd(g, ST7565_COLUMN_LSB | 0); + write_cmd(g, ST7565_RMW); + flush_cmd(g); + enter_data_mode(g); + write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); + enter_cmd_mode(g); + } + unsigned line = (PRIV(g)->buffer2 ? 32 : 0); + write_cmd(g, ST7565_START_LINE | line); + flush_cmd(g); + PRIV(g)->buffer2 = !PRIV(g)->buffer2; + release_bus(g); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; +} +#endif + +#if GDISP_HARDWARE_DRAWPIXEL +LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + if (gdispColor2Native(g->p.color) != Black) + RAM(g)[xyaddr(x, y)] |= xybit(y); + else + RAM(g)[xyaddr(x, y)] &= ~xybit(y); + g->flags |= GDISP_FLG_NEEDFLUSH; +} +#endif + +#if GDISP_HARDWARE_PIXELREAD +LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; +} +#endif + +LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { + uint8_t* buffer = (uint8_t*)g->p.ptr; + int linelength = g->p.cx; + for (int i = 0; i < g->p.cy; i++) { + unsigned dstx = g->p.x; + unsigned dsty = g->p.y + i; + unsigned srcx = g->p.x1; + unsigned srcy = g->p.y1 + i; + unsigned srcbit = srcy * g->p.x2 + srcx; + for(int j=0; j < linelength; j++) { + uint8_t src = buffer[srcbit / 8]; + uint8_t bit = 7-(srcbit % 8); + uint8_t bitset = (src >> bit) & 1; + uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]); + if (bitset) { + *dst |= xybit(dsty); + } + else { + *dst &= ~xybit(dsty); + } + dstx++; + srcbit++; + } + } + g->flags |= GDISP_FLG_NEEDFLUSH; +} + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL +LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + acquire_bus(g); + enter_cmd_mode(g); + write_cmd(g, ST7565_DISPLAY_OFF); + flush_cmd(g); + release_bus(g); + break; + case powerOn: + acquire_bus(g); + enter_cmd_mode(g); + write_cmd(g, ST7565_DISPLAY_ON); + flush_cmd(g); + release_bus(g); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_CONTRAST: + g->g.Contrast = (unsigned)g->p.ptr & 63; + acquire_bus(g); + enter_cmd_mode(g); + write_cmd2(g, ST7565_CONTRAST, g->g.Contrast); + flush_cmd(g); + release_bus(g); + return; + } +} +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h new file mode 100644 index 0000000000..2b66a877c8 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h @@ -0,0 +1,27 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_HARDWARE_BITFILLS TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h new file mode 100644 index 0000000000..24924ff050 --- /dev/null +++ b/drivers/ugfx/gdisp/st7565/st7565.h @@ -0,0 +1,39 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _ST7565_H +#define _ST7565_H + +#define ST7565_CONTRAST 0x81 +#define ST7565_ALLON_NORMAL 0xA4 +#define ST7565_ALLON 0xA5 +#define ST7565_POSITIVE_DISPLAY 0xA6 +#define ST7565_INVERT_DISPLAY 0xA7 +#define ST7565_DISPLAY_OFF 0xAE +#define ST7565_DISPLAY_ON 0xAF + +#define ST7565_LCD_BIAS_7 0xA3 +#define ST7565_LCD_BIAS_9 0xA2 + +#define ST7565_ADC_NORMAL 0xA0 +#define ST7565_ADC_REVERSE 0xA1 + +#define ST7565_COM_SCAN_INC 0xC0 +#define ST7565_COM_SCAN_DEC 0xC8 + +#define ST7565_START_LINE 0x40 +#define ST7565_PAGE 0xB0 +#define ST7565_COLUMN_MSB 0x10 +#define ST7565_COLUMN_LSB 0x00 +#define ST7565_RMW 0xE0 + +#define ST7565_RESISTOR_RATIO 0x20 +#define ST7565_POWER_CONTROL 0x28 + +#define ST7565_RESET 0xE2 + +#endif /* _ST7565_H */ diff --git a/drivers/ugfx/gdisp/st7565ergodox/driver.mk b/drivers/ugfx/gdisp/st7565ergodox/driver.mk deleted file mode 100644 index 401e15e691..0000000000 --- a/drivers/ugfx/gdisp/st7565ergodox/driver.mk +++ /dev/null @@ -1,2 +0,0 @@ -GFXINC += drivers/ugfx/gdisp/st7565ergodox -GFXSRC += drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c deleted file mode 100644 index c576280a12..0000000000 --- a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_ST7565.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#include "gfx.h" - -#if GFX_USE_GDISP - -#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX -#include "gdisp_lld_config.h" -#include "src/gdisp/gdisp_driver.h" - -#include "board_ST7565.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -#ifndef GDISP_SCREEN_HEIGHT -#define GDISP_SCREEN_HEIGHT 32 -#endif -#ifndef GDISP_SCREEN_WIDTH -#define GDISP_SCREEN_WIDTH 128 -#endif -#ifndef GDISP_INITIAL_CONTRAST -#define GDISP_INITIAL_CONTRAST 35 -#endif -#ifndef GDISP_INITIAL_BACKLIGHT -#define GDISP_INITIAL_BACKLIGHT 100 -#endif - -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) - -#include "st7565.h" - -/*===========================================================================*/ -/* Driver config defaults for backward compatibility. */ -/*===========================================================================*/ -#ifndef ST7565_LCD_BIAS -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#endif -#ifndef ST7565_ADC -#define ST7565_ADC ST7565_ADC_NORMAL -#endif -#ifndef ST7565_COM_SCAN -#define ST7565_COM_SCAN ST7565_COM_SCAN_INC -#endif -#ifndef ST7565_PAGE_ORDER -#define ST7565_PAGE_ORDER 0,1,2,3 -#endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct{ - bool_t buffer2; - uint8_t data_pos; - uint8_t data[16]; - uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; -}PrivData; - -// Some common routines and macros -#define PRIV(g) ((PrivData*)g->priv) -#define RAM(g) (PRIV(g)->ram) - -static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { - PRIV(g)->data[PRIV(g)->data_pos++] = cmd; -} - -static GFXINLINE void flush_cmd(GDisplay* g) { - write_data(g, PRIV(g)->data, PRIV(g)->data_pos); - PRIV(g)->data_pos = 0; -} - -#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } -#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } - -// Some common routines and macros -#define delay(us) gfxSleepMicroseconds(us) -#define delay_ms(ms) gfxSleepMilliseconds(ms) - -#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) -#define xybit(y) (1<<((y)&7)) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* - * As this controller can't update on a pixel boundary we need to maintain the - * the entire display surface in memory so that we can do the necessary bit - * operations. Fortunately it is a small display in monochrome. - * 64 * 128 / 8 = 1024 bytes. - */ - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - PRIV(g)->buffer2 = false; - PRIV(g)->data_pos = 0; - - // Initialise the board interface - init_board(g); - - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); - acquire_bus(g); - enter_cmd_mode(g); - - write_cmd(g, ST7565_RESET); - write_cmd(g, ST7565_LCD_BIAS); - write_cmd(g, ST7565_ADC); - write_cmd(g, ST7565_COM_SCAN); - - write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); - write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST); - - // turn on internal power supply (VC=1, VR=1, VF=1) - write_cmd(g, ST7565_POWER_CONTROL | 0x07); - - write_cmd(g, ST7565_INVERT_DISPLAY); - write_cmd(g, ST7565_ALLON_NORMAL); - - write_cmd(g, ST7565_START_LINE | 0); - write_cmd(g, ST7565_RMW); - flush_cmd(g); - - // Finish Init - post_init_board(g); - - // Release the bus - release_bus(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -#if GDISP_HARDWARE_FLUSH -LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; - - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - acquire_bus(g); - enter_cmd_mode(g); - unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); - for (p = 0; p < 4; p++) { - write_cmd(g, ST7565_PAGE | (p + dstOffset)); - write_cmd(g, ST7565_COLUMN_MSB | 0); - write_cmd(g, ST7565_COLUMN_LSB | 0); - write_cmd(g, ST7565_RMW); - flush_cmd(g); - enter_data_mode(g); - write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); - enter_cmd_mode(g); - } - unsigned line = (PRIV(g)->buffer2 ? 32 : 0); - write_cmd(g, ST7565_START_LINE | line); - flush_cmd(g); - PRIV(g)->buffer2 = !PRIV(g)->buffer2; - release_bus(g); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; -} -#endif - -#if GDISP_HARDWARE_DRAWPIXEL -LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - if (gdispColor2Native(g->p.color) != Black) - RAM(g)[xyaddr(x, y)] |= xybit(y); - else - RAM(g)[xyaddr(x, y)] &= ~xybit(y); - g->flags |= GDISP_FLG_NEEDFLUSH; -} -#endif - -#if GDISP_HARDWARE_PIXELREAD -LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; -} -#endif - -LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { - uint8_t* buffer = (uint8_t*)g->p.ptr; - int linelength = g->p.cx; - for (int i = 0; i < g->p.cy; i++) { - unsigned dstx = g->p.x; - unsigned dsty = g->p.y + i; - unsigned srcx = g->p.x1; - unsigned srcy = g->p.y1 + i; - unsigned srcbit = srcy * g->p.x2 + srcx; - for(int j=0; j < linelength; j++) { - uint8_t src = buffer[srcbit / 8]; - uint8_t bit = 7-(srcbit % 8); - uint8_t bitset = (src >> bit) & 1; - uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]); - if (bitset) { - *dst |= xybit(dsty); - } - else { - *dst &= ~xybit(dsty); - } - dstx++; - srcbit++; - } - } - g->flags |= GDISP_FLG_NEEDFLUSH; -} - -#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL -LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - acquire_bus(g); - enter_cmd_mode(g); - write_cmd(g, ST7565_DISPLAY_OFF); - flush_cmd(g); - release_bus(g); - break; - case powerOn: - acquire_bus(g); - enter_cmd_mode(g); - write_cmd(g, ST7565_DISPLAY_ON); - flush_cmd(g); - release_bus(g); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - g->g.Contrast = (unsigned)g->p.ptr & 63; - acquire_bus(g); - enter_cmd_mode(g); - write_cmd2(g, ST7565_CONTRAST, g->g.Contrast); - flush_cmd(g); - release_bus(g); - return; - } -} -#endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h deleted file mode 100644 index 2b66a877c8..0000000000 --- a/drivers/ugfx/gdisp/st7565ergodox/gdisp_lld_config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE -#define GDISP_HARDWARE_BITFILLS TRUE - -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565ergodox/st7565.h b/drivers/ugfx/gdisp/st7565ergodox/st7565.h deleted file mode 100644 index 24924ff050..0000000000 --- a/drivers/ugfx/gdisp/st7565ergodox/st7565.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _ST7565_H -#define _ST7565_H - -#define ST7565_CONTRAST 0x81 -#define ST7565_ALLON_NORMAL 0xA4 -#define ST7565_ALLON 0xA5 -#define ST7565_POSITIVE_DISPLAY 0xA6 -#define ST7565_INVERT_DISPLAY 0xA7 -#define ST7565_DISPLAY_OFF 0xAE -#define ST7565_DISPLAY_ON 0xAF - -#define ST7565_LCD_BIAS_7 0xA3 -#define ST7565_LCD_BIAS_9 0xA2 - -#define ST7565_ADC_NORMAL 0xA0 -#define ST7565_ADC_REVERSE 0xA1 - -#define ST7565_COM_SCAN_INC 0xC0 -#define ST7565_COM_SCAN_DEC 0xC8 - -#define ST7565_START_LINE 0x40 -#define ST7565_PAGE 0xB0 -#define ST7565_COLUMN_MSB 0x10 -#define ST7565_COLUMN_LSB 0x00 -#define ST7565_RMW 0xE0 - -#define ST7565_RESISTOR_RATIO 0x20 -#define ST7565_POWER_CONTROL 0x28 - -#define ST7565_RESET 0xE2 - -#endif /* _ST7565_H */ diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h index 45b9f58580..a3fb5b0c78 100644 --- a/keyboards/ergodox/infinity/gfxconf.h +++ b/keyboards/ergodox/infinity/gfxconf.h @@ -130,7 +130,7 @@ //#define GDISP_TOTAL_DISPLAYS 2 #ifndef EMULATOR -#define GDISP_DRIVER_LIST GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX +#define GDISP_DRIVER_LIST GDISPVMT_ST7565_QMK, GDISPVMT_IS31FL3731C_QMK #else #define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX #endif diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index 9e22463637..18171560da 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -67,5 +67,5 @@ LCD_BACKLIGHT_ENABLE = yes MIDI_ENABLE = no RGBLIGHT_ENABLE = no -include $(TOP_DIR)/drivers/ugfx/gdisp/st7565ergodox/driver.mk -include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk \ No newline at end of file +include $(TOP_DIR)/drivers/ugfx/gdisp/st7565/driver.mk +include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk \ No newline at end of file diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h index 890317a0f4..27dfb94fbf 100644 --- a/keyboards/whitefox/gfxconf.h +++ b/keyboards/whitefox/gfxconf.h @@ -130,7 +130,7 @@ //#define GDISP_TOTAL_DISPLAYS 2 #ifndef EMULATOR -#define GDISP_DRIVER_LIST GDISPVMT_IS31FL3731C_WHITEFOX +#define GDISP_DRIVER_LIST GDISPVMT_IS31FL3731C_QMK #endif #ifdef GDISP_DRIVER_LIST diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index 4cf23a3900..c0effcb7b7 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -70,4 +70,4 @@ CUSTOM_MATRIX = yes # Custom matrix file BACKLIGHT_ENABLE = yes VISUALIZER_ENABLE = yes -include $(TOP_DIR)/drivers/ugfx/gdisp/IS31FL3731C/driver.mk +include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk -- cgit v1.2.3 From 011ee294414800eaa18ce7c3f9447054d9eae765 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 9 Jul 2017 13:50:18 +0300 Subject: Fixup mixed tabs/spaces --- drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c | 246 ++++++++++----------- drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h | 14 +- drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c | 36 +-- drivers/ugfx/gdisp/st7565/gdisp_lld_config.h | 6 +- keyboards/ergodox/infinity/board_ST7565.h | 6 +- 5 files changed, 154 insertions(+), 154 deletions(-) diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c index c55dd0a0ea..0691dbfbf3 100644 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c +++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c @@ -19,7 +19,7 @@ along with this program. If not, see . #if GFX_USE_GDISP -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK +#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK #include "gdisp_lld_config.h" #include "src/gdisp/gdisp_driver.h" @@ -34,26 +34,26 @@ extern const uint8_t CIE1931_CURVE[]; /*===========================================================================*/ #ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 + #define GDISP_SCREEN_HEIGHT 9 #endif #ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 + #define GDISP_SCREEN_WIDTH 16 #endif #ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 + #define GDISP_INITIAL_CONTRAST 0 #endif #ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 0 + #define GDISP_INITIAL_BACKLIGHT 0 #endif -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) #define IS31_ADDR_DEFAULT 0x74 -#define IS31_REG_CONFIG 0x00 +#define IS31_REG_CONFIG 0x00 // bits in reg -#define IS31_REG_CONFIG_PICTUREMODE 0x00 -#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 +#define IS31_REG_CONFIG_PICTUREMODE 0x00 +#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 #define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 // D2:D0 bits are starting frame for autoplay mode @@ -144,14 +144,14 @@ static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint } LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; + PRIV(g)->page = 0; - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); + // Initialise the board interface + init_board(g); + gfxSleepMilliseconds(10); // zero function page, all registers (assuming full_page is all zeroes) write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); @@ -179,134 +179,134 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { // Finish Init post_init_board(g); - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOff; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; } #if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t* src = PRIV(g)->frame_buffer; - for (int y=0;yg.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; - ++src; - } - } + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + PRIV(g)->page++; + PRIV(g)->page %= 2; + // TODO: some smarter algorithm for this + // We should run only one physical page at a time + // This way we don't need to send so much data, and + // we could use slightly less memory + uint8_t* src = PRIV(g)->frame_buffer; + for (int y=0;yg.Backlight / 100; + PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; + ++src; + } + } write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); gfxSleepMilliseconds(1); write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } #endif #if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; - } + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); + g->flags |= GDISP_FLG_NEEDFLUSH; + } #endif #if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); - } + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); + } #endif #if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: + break; + case powerOn: write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) + break; + default: return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_BACKLIGHT: + if (g->g.Backlight == (unsigned)g->p.ptr) + return; + unsigned val = (unsigned)g->p.ptr; + g->g.Backlight = val > 100 ? 100 : val; g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } - } + return; + } + } #endif // GDISP_NEED_CONTROL #endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h index bb28ad775e..588d688cf6 100644 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h +++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h @@ -24,13 +24,13 @@ along with this program. If not, see . /* Driver hardware support. */ /*===========================================================================*/ -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 -#endif /* GFX_USE_GDISP */ +#endif /* GFX_USE_GDISP */ -#endif /* _GDISP_LLD_CONFIG_H */ +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c index 69c5747728..55552cb795 100644 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c +++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c @@ -9,7 +9,7 @@ #if GFX_USE_GDISP -#define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK +#define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK #include "gdisp_lld_config.h" #include "src/gdisp/gdisp_driver.h" @@ -20,24 +20,24 @@ /*===========================================================================*/ #ifndef GDISP_SCREEN_HEIGHT -#define GDISP_SCREEN_HEIGHT 32 +#define GDISP_SCREEN_HEIGHT 32 #endif #ifndef GDISP_SCREEN_WIDTH -#define GDISP_SCREEN_WIDTH 128 +#define GDISP_SCREEN_WIDTH 128 #endif #ifndef GDISP_INITIAL_CONTRAST -#define GDISP_INITIAL_CONTRAST 35 +#define GDISP_INITIAL_CONTRAST 35 #endif #ifndef GDISP_INITIAL_BACKLIGHT -#define GDISP_INITIAL_BACKLIGHT 100 +#define GDISP_INITIAL_BACKLIGHT 100 #endif -#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) #include "st7565.h" /*===========================================================================*/ -/* Driver config defaults for backward compatibility. */ +/* Driver config defaults for backward compatibility. */ /*===========================================================================*/ #ifndef ST7565_LCD_BIAS #define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 @@ -65,7 +65,7 @@ typedef struct{ // Some common routines and macros #define PRIV(g) ((PrivData*)g->priv) -#define RAM(g) (PRIV(g)->ram) +#define RAM(g) (PRIV(g)->ram) static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { PRIV(g)->data[PRIV(g)->data_pos++] = cmd; @@ -76,15 +76,15 @@ static GFXINLINE void flush_cmd(GDisplay* g) { PRIV(g)->data_pos = 0; } -#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } -#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } +#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } +#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } // Some common routines and macros -#define delay(us) gfxSleepMicroseconds(us) -#define delay_ms(ms) gfxSleepMilliseconds(ms) +#define delay(us) gfxSleepMicroseconds(us) +#define delay_ms(ms) gfxSleepMilliseconds(ms) -#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) -#define xybit(y) (1<<((y)&7)) +#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) +#define xybit(y) (1<<((y)&7)) /*===========================================================================*/ /* Driver exported functions. */ @@ -150,7 +150,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { #if GDISP_HARDWARE_FLUSH LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; + unsigned p; // Don't flush if we don't need it. if (!(g->flags & GDISP_FLG_NEEDFLUSH)) @@ -181,7 +181,7 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) { #if GDISP_HARDWARE_DRAWPIXEL LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; + coord_t x, y; switch(g->g.Orientation) { default: @@ -212,7 +212,7 @@ LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { #if GDISP_HARDWARE_PIXELREAD LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; + coord_t x, y; switch(g->g.Orientation) { default: @@ -257,7 +257,7 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { else { *dst &= ~xybit(dsty); } - dstx++; + dstx++; srcbit++; } } diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h index 2b66a877c8..4446bd38bc 100644 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h +++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h @@ -14,7 +14,7 @@ /* Driver hardware support. */ /*===========================================================================*/ -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing #define GDISP_HARDWARE_DRAWPIXEL TRUE #define GDISP_HARDWARE_PIXELREAD TRUE #define GDISP_HARDWARE_CONTROL TRUE @@ -22,6 +22,6 @@ #define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO -#endif /* GFX_USE_GDISP */ +#endif /* GFX_USE_GDISP */ -#endif /* _GDISP_LLD_CONFIG_H */ +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/ergodox/infinity/board_ST7565.h b/keyboards/ergodox/infinity/board_ST7565.h index 9650ffb440..9ab636c95d 100644 --- a/keyboards/ergodox/infinity/board_ST7565.h +++ b/keyboards/ergodox/infinity/board_ST7565.h @@ -83,7 +83,7 @@ static GFXINLINE void init_board(GDisplay *g) { } static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; + (void) g; } static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { @@ -106,8 +106,8 @@ static GFXINLINE void enter_cmd_mode(GDisplay *g) { static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - spiSend(&SPID1, length, data); + (void) g; + spiSend(&SPID1, length, data); } #endif /* _GDISP_LLD_BOARD_H */ -- cgit v1.2.3 From 8a962f7b271e965fa69eeb9aeab23a5969669984 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 9 Jul 2017 14:03:36 +0300 Subject: Define visualizer thread priority by default --- keyboards/ergodox/infinity/config.h | 2 -- keyboards/whitefox/config.h | 4 +--- quantum/visualizer/visualizer.c | 3 ++- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h index 25cc8af0fc..fa157a893f 100644 --- a/keyboards/ergodox/infinity/config.h +++ b/keyboards/ergodox/infinity/config.h @@ -51,8 +51,6 @@ along with this program. If not, see . #define SERIAL_LINK_BAUD 562500 #define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) -// The visualizer needs gfx thread priorities -#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) #define VISUALIZER_USER_DATA_SIZE 16 diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h index 08de9b9aa8..76040bd744 100644 --- a/keyboards/whitefox/config.h +++ b/keyboards/whitefox/config.h @@ -87,6 +87,4 @@ along with this program. If not, see . #define LED_DISPLAY_NUMBER 0 #define LED_NUM_ROWS 5 -#define LED_NUM_COLS 16 - -#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) +#define LED_NUM_COLS 16 \ No newline at end of file diff --git a/quantum/visualizer/visualizer.c b/quantum/visualizer/visualizer.c index cc99d1e3b6..68b86f590c 100644 --- a/quantum/visualizer/visualizer.c +++ b/quantum/visualizer/visualizer.c @@ -52,7 +52,8 @@ SOFTWARE. // Define this in config.h #ifndef VISUALIZER_THREAD_PRIORITY -#define "Visualizer thread priority not defined" +// The visualizer needs gfx thread priorities +#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) #endif static visualizer_keyboard_status_t current_status = { -- cgit v1.2.3 From f3c113fb5a5ea89762b5c51d5d182093f6fb999d Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 9 Jul 2017 14:31:38 +0300 Subject: Shared gfxconf --- keyboards/ergodox/infinity/gfxconf.h | 300 +------------------------------- keyboards/whitefox/gfxconf.h | 300 +------------------------------- quantum/visualizer/common_gfxconf.h | 325 +++++++++++++++++++++++++++++++++++ quantum/visualizer/visualizer.mk | 3 + 4 files changed, 330 insertions(+), 598 deletions(-) create mode 100644 quantum/visualizer/common_gfxconf.h diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h index a3fb5b0c78..0d017aea97 100644 --- a/keyboards/ergodox/infinity/gfxconf.h +++ b/keyboards/ergodox/infinity/gfxconf.h @@ -22,310 +22,12 @@ #ifndef _GFXCONF_H #define _GFXCONF_H - -/////////////////////////////////////////////////////////////////////////// -// GOS - One of these must be defined, preferably in your Makefile // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_USE_OS_CHIBIOS TRUE -//#define GFX_USE_OS_FREERTOS FALSE -// #define GFX_FREERTOS_USE_TRACE FALSE -//#define GFX_USE_OS_WIN32 FALSE -//#define GFX_USE_OS_LINUX FALSE -//#define GFX_USE_OS_OSX FALSE -//#define GFX_USE_OS_ECOS FALSE -//#define GFX_USE_OS_RAWRTOS FALSE -//#define GFX_USE_OS_ARDUINO FALSE -//#define GFX_USE_OS_KEIL FALSE -//#define GFX_USE_OS_CMSIS FALSE -//#define GFX_USE_OS_RAW32 FALSE -// #define INTERRUPTS_OFF() optional_code -// #define INTERRUPTS_ON() optional_code -// These are not defined by default for some reason -#define GOS_NEED_X_THREADS FALSE -#define GOS_NEED_X_HEAP FALSE - -// Options that (should where relevant) apply to all operating systems - #define GFX_NO_INLINE FALSE -// #define GFX_COMPILER GFX_COMPILER_UNKNOWN -// #define GFX_CPU GFX_CPU_UNKNOWN -// #define GFX_OS_HEAP_SIZE 0 -// #define GFX_OS_NO_INIT FALSE -// #define GFX_OS_INIT_NO_WARNING FALSE -// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine -// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine -// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine - - -/////////////////////////////////////////////////////////////////////////// -// GDISP // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GDISP TRUE - -//#define GDISP_NEED_AUTOFLUSH FALSE -//#define GDISP_NEED_TIMERFLUSH FALSE -//#define GDISP_NEED_VALIDATION TRUE -//#define GDISP_NEED_CLIP TRUE -#define GDISP_NEED_CIRCLE TRUE -#define GDISP_NEED_ELLIPSE TRUE -#define GDISP_NEED_ARC TRUE -#define GDISP_NEED_ARCSECTORS TRUE -#define GDISP_NEED_CONVEX_POLYGON TRUE -//#define GDISP_NEED_SCROLL FALSE -#define GDISP_NEED_PIXELREAD TRUE -#define GDISP_NEED_CONTROL TRUE -//#define GDISP_NEED_QUERY FALSE -//#define GDISP_NEED_MULTITHREAD FALSE -//#define GDISP_NEED_STREAMING FALSE -#define GDISP_NEED_TEXT TRUE -// #define GDISP_NEED_TEXT_WORDWRAP FALSE -// #define GDISP_NEED_ANTIALIAS FALSE -// #define GDISP_NEED_UTF8 FALSE - #define GDISP_NEED_TEXT_KERNING TRUE -// #define GDISP_INCLUDE_FONT_UI1 FALSE -// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. -// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE - #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE -// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE -// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE - #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE -// #define GDISP_INCLUDE_USER_FONTS FALSE - -//#define GDISP_NEED_IMAGE FALSE -// #define GDISP_NEED_IMAGE_NATIVE FALSE -// #define GDISP_NEED_IMAGE_GIF FALSE -// #define GDISP_NEED_IMAGE_BMP FALSE -// #define GDISP_NEED_IMAGE_BMP_1 FALSE -// #define GDISP_NEED_IMAGE_BMP_4 FALSE -// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_8 FALSE -// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_16 FALSE -// #define GDISP_NEED_IMAGE_BMP_24 FALSE -// #define GDISP_NEED_IMAGE_BMP_32 FALSE -// #define GDISP_NEED_IMAGE_JPG FALSE -// #define GDISP_NEED_IMAGE_PNG FALSE -// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE -#ifdef EMULATOR -#define GDISP_NEED_PIXMAP TRUE -#endif -// #define GDISP_NEED_PIXMAP_IMAGE FALSE - -//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. -//#define GDISP_LINEBUF_SIZE 128 -//#define GDISP_STARTUP_COLOR Black -#define GDISP_NEED_STARTUP_LOGO FALSE - -//#define GDISP_TOTAL_DISPLAYS 2 - #ifndef EMULATOR #define GDISP_DRIVER_LIST GDISPVMT_ST7565_QMK, GDISPVMT_IS31FL3731C_QMK #else #define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX #endif - #ifdef GDISP_DRIVER_LIST - // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability - #define GDISP_HARDWARE_STREAM_WRITE FALSE - #define GDISP_HARDWARE_STREAM_READ FALSE - #define GDISP_HARDWARE_STREAM_POS FALSE - #define GDISP_HARDWARE_DRAWPIXEL TRUE - #define GDISP_HARDWARE_CLEARS FALSE - #define GDISP_HARDWARE_FILLS FALSE - //#define GDISP_HARDWARE_BITFILLS FALSE - #define GDISP_HARDWARE_SCROLL FALSE - #define GDISP_HARDWARE_PIXELREAD TRUE - #define GDISP_HARDWARE_CONTROL TRUE - #define GDISP_HARDWARE_QUERY FALSE - #define GDISP_HARDWARE_CLIP FALSE - - #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 - #endif - -// The custom format is not defined for some reason, so define it as error -// so we don't get compiler warnings -#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR - -#define GDISP_USE_GFXNET FALSE -// #define GDISP_GFXNET_PORT 13001 -// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE -// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE -// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GWIN // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GWIN FALSE - -//#define GWIN_NEED_WINDOWMANAGER FALSE -// #define GWIN_REDRAW_IMMEDIATE FALSE -// #define GWIN_REDRAW_SINGLEOP FALSE -// #define GWIN_NEED_FLASHING FALSE -// #define GWIN_FLASHING_PERIOD 250 - -//#define GWIN_NEED_CONSOLE FALSE -// #define GWIN_CONSOLE_USE_HISTORY FALSE -// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE -// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE -// #define GWIN_CONSOLE_ESCSEQ FALSE -// #define GWIN_CONSOLE_USE_BASESTREAM FALSE -// #define GWIN_CONSOLE_USE_FLOAT FALSE -//#define GWIN_NEED_GRAPH FALSE -//#define GWIN_NEED_GL3D FALSE - -//#define GWIN_NEED_WIDGET FALSE -//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 -// #define GWIN_NEED_LABEL FALSE -// #define GWIN_LABEL_ATTRIBUTE FALSE -// #define GWIN_NEED_BUTTON FALSE -// #define GWIN_BUTTON_LAZY_RELEASE FALSE -// #define GWIN_NEED_SLIDER FALSE -// #define GWIN_SLIDER_NOSNAP FALSE -// #define GWIN_SLIDER_DEAD_BAND 5 -// #define GWIN_SLIDER_TOGGLE_INC 20 -// #define GWIN_NEED_CHECKBOX FALSE -// #define GWIN_NEED_IMAGE FALSE -// #define GWIN_NEED_IMAGE_ANIMATION FALSE -// #define GWIN_NEED_RADIO FALSE -// #define GWIN_NEED_LIST FALSE -// #define GWIN_NEED_LIST_IMAGES FALSE -// #define GWIN_NEED_PROGRESSBAR FALSE -// #define GWIN_PROGRESSBAR_AUTO FALSE -// #define GWIN_NEED_KEYBOARD FALSE -// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 -// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE -// #define GWIN_NEED_TEXTEDIT FALSE -// #define GWIN_FLAT_STYLING FALSE -// #define GWIN_WIDGET_TAGS FALSE - -//#define GWIN_NEED_CONTAINERS FALSE -// #define GWIN_NEED_CONTAINER FALSE -// #define GWIN_NEED_FRAME FALSE -// #define GWIN_NEED_TABSET FALSE -// #define GWIN_TABSET_TABHEIGHT 18 - - -/////////////////////////////////////////////////////////////////////////// -// GEVENT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GEVENT TRUE - -//#define GEVENT_ASSERT_NO_RESOURCE FALSE -//#define GEVENT_MAXIMUM_SIZE 32 -//#define GEVENT_MAX_SOURCE_LISTENERS 32 - - -/////////////////////////////////////////////////////////////////////////// -// GTIMER // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GTIMER FALSE - -//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY -//#define GTIMER_THREAD_WORKAREA_SIZE 2048 - - -/////////////////////////////////////////////////////////////////////////// -// GQUEUE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GQUEUE FALSE - -//#define GQUEUE_NEED_ASYNC FALSE -//#define GQUEUE_NEED_GSYNC FALSE -//#define GQUEUE_NEED_FSYNC FALSE -//#define GQUEUE_NEED_BUFFERS FALSE - -/////////////////////////////////////////////////////////////////////////// -// GINPUT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GINPUT FALSE - -//#define GINPUT_NEED_MOUSE FALSE -// #define GINPUT_TOUCH_STARTRAW FALSE -// #define GINPUT_TOUCH_NOTOUCH FALSE -// #define GINPUT_TOUCH_NOCALIBRATE FALSE -// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE -// #define GINPUT_MOUSE_POLL_PERIOD 25 -// #define GINPUT_MOUSE_CLICK_TIME 300 -// #define GINPUT_TOUCH_CXTCLICK_TIME 700 -// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE -// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE -// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 -//#define GINPUT_NEED_KEYBOARD FALSE -// #define GINPUT_KEYBOARD_POLL_PERIOD 200 -// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 -// #define GKEYBOARD_LAYOUT_OFF FALSE -// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE -//#define GINPUT_NEED_TOGGLE FALSE -//#define GINPUT_NEED_DIAL FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GFILE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GFILE FALSE - -//#define GFILE_NEED_PRINTG FALSE -//#define GFILE_NEED_SCANG FALSE -//#define GFILE_NEED_STRINGS FALSE -//#define GFILE_NEED_FILELISTS FALSE -//#define GFILE_NEED_STDIO FALSE -//#define GFILE_NEED_NOAUTOMOUNT FALSE -//#define GFILE_NEED_NOAUTOSYNC FALSE - -//#define GFILE_NEED_MEMFS FALSE -//#define GFILE_NEED_ROMFS FALSE -//#define GFILE_NEED_RAMFS FALSE -//#define GFILE_NEED_FATFS FALSE -//#define GFILE_NEED_NATIVEFS FALSE -//#define GFILE_NEED_CHBIOSFS FALSE - -//#define GFILE_ALLOW_FLOATS FALSE -//#define GFILE_ALLOW_DEVICESPECIFIC FALSE -//#define GFILE_MAX_GFILES 3 - -/////////////////////////////////////////////////////////////////////////// -// GADC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GADC FALSE - -//#define GADC_MAX_LOWSPEED_DEVICES 4 - - -/////////////////////////////////////////////////////////////////////////// -// GAUDIO // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GAUDIO FALSE -// There seems to be a bug in the ugfx code, the wrong define is used -// So define it in order to avoid warnings -#define GFX_USE_GAUDIN GFX_USE_GAUDIO -// #define GAUDIO_NEED_PLAY FALSE -// #define GAUDIO_NEED_RECORD FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GMISC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GMISC TRUE - -//#define GMISC_NEED_ARRAYOPS FALSE -//#define GMISC_NEED_FASTTRIG FALSE -//#define GMISC_NEED_FIXEDTRIG FALSE -//#define GMISC_NEED_INVSQRT FALSE -// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE -// #define GMISC_INVSQRT_REAL_SLOW FALSE -#define GMISC_NEED_MATRIXFLOAT2D TRUE -#define GMISC_NEED_MATRIXFIXED2D FALSE +#include "common_gfxconf.h" #endif /* _GFXCONF_H */ diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h index 27dfb94fbf..eb93f92ebb 100644 --- a/keyboards/whitefox/gfxconf.h +++ b/keyboards/whitefox/gfxconf.h @@ -22,308 +22,10 @@ #ifndef _GFXCONF_H #define _GFXCONF_H - -/////////////////////////////////////////////////////////////////////////// -// GOS - One of these must be defined, preferably in your Makefile // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_USE_OS_CHIBIOS TRUE -//#define GFX_USE_OS_FREERTOS FALSE -// #define GFX_FREERTOS_USE_TRACE FALSE -//#define GFX_USE_OS_WIN32 FALSE -//#define GFX_USE_OS_LINUX FALSE -//#define GFX_USE_OS_OSX FALSE -//#define GFX_USE_OS_ECOS FALSE -//#define GFX_USE_OS_RAWRTOS FALSE -//#define GFX_USE_OS_ARDUINO FALSE -//#define GFX_USE_OS_KEIL FALSE -//#define GFX_USE_OS_CMSIS FALSE -//#define GFX_USE_OS_RAW32 FALSE -// #define INTERRUPTS_OFF() optional_code -// #define INTERRUPTS_ON() optional_code -// These are not defined by default for some reason -#define GOS_NEED_X_THREADS FALSE -#define GOS_NEED_X_HEAP FALSE - -// Options that (should where relevant) apply to all operating systems - #define GFX_NO_INLINE FALSE -// #define GFX_COMPILER GFX_COMPILER_UNKNOWN -// #define GFX_CPU GFX_CPU_UNKNOWN -// #define GFX_OS_HEAP_SIZE 0 -// #define GFX_OS_NO_INIT FALSE -// #define GFX_OS_INIT_NO_WARNING FALSE -// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine -// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine -// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine - - -/////////////////////////////////////////////////////////////////////////// -// GDISP // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GDISP TRUE - -//#define GDISP_NEED_AUTOFLUSH FALSE -//#define GDISP_NEED_TIMERFLUSH FALSE -//#define GDISP_NEED_VALIDATION TRUE -//#define GDISP_NEED_CLIP TRUE -#define GDISP_NEED_CIRCLE TRUE -#define GDISP_NEED_ELLIPSE TRUE -#define GDISP_NEED_ARC TRUE -#define GDISP_NEED_ARCSECTORS TRUE -#define GDISP_NEED_CONVEX_POLYGON TRUE -//#define GDISP_NEED_SCROLL FALSE -#define GDISP_NEED_PIXELREAD TRUE -#define GDISP_NEED_CONTROL TRUE -//#define GDISP_NEED_QUERY FALSE -//#define GDISP_NEED_MULTITHREAD FALSE -//#define GDISP_NEED_STREAMING FALSE -#define GDISP_NEED_TEXT TRUE -// #define GDISP_NEED_TEXT_WORDWRAP FALSE -// #define GDISP_NEED_ANTIALIAS FALSE -// #define GDISP_NEED_UTF8 FALSE - #define GDISP_NEED_TEXT_KERNING TRUE -// #define GDISP_INCLUDE_FONT_UI1 FALSE -// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. -// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE - #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE -// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE -// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE - #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE -// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE -// #define GDISP_INCLUDE_USER_FONTS FALSE - -//#define GDISP_NEED_IMAGE FALSE -// #define GDISP_NEED_IMAGE_NATIVE FALSE -// #define GDISP_NEED_IMAGE_GIF FALSE -// #define GDISP_NEED_IMAGE_BMP FALSE -// #define GDISP_NEED_IMAGE_BMP_1 FALSE -// #define GDISP_NEED_IMAGE_BMP_4 FALSE -// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_8 FALSE -// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE -// #define GDISP_NEED_IMAGE_BMP_16 FALSE -// #define GDISP_NEED_IMAGE_BMP_24 FALSE -// #define GDISP_NEED_IMAGE_BMP_32 FALSE -// #define GDISP_NEED_IMAGE_JPG FALSE -// #define GDISP_NEED_IMAGE_PNG FALSE -// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE -#ifdef EMULATOR -#define GDISP_NEED_PIXMAP TRUE -#endif -// #define GDISP_NEED_PIXMAP_IMAGE FALSE - -//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. -//#define GDISP_LINEBUF_SIZE 128 -//#define GDISP_STARTUP_COLOR Black -#define GDISP_NEED_STARTUP_LOGO FALSE - -//#define GDISP_TOTAL_DISPLAYS 2 - #ifndef EMULATOR #define GDISP_DRIVER_LIST GDISPVMT_IS31FL3731C_QMK #endif - #ifdef GDISP_DRIVER_LIST - // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability - #define GDISP_HARDWARE_STREAM_WRITE FALSE - #define GDISP_HARDWARE_STREAM_READ FALSE - #define GDISP_HARDWARE_STREAM_POS FALSE - #define GDISP_HARDWARE_DRAWPIXEL TRUE - #define GDISP_HARDWARE_CLEARS FALSE - #define GDISP_HARDWARE_FILLS FALSE - //#define GDISP_HARDWARE_BITFILLS FALSE - #define GDISP_HARDWARE_SCROLL FALSE - #define GDISP_HARDWARE_PIXELREAD TRUE - #define GDISP_HARDWARE_CONTROL TRUE - #define GDISP_HARDWARE_QUERY FALSE - #define GDISP_HARDWARE_CLIP FALSE - - #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 - #endif - -// The custom format is not defined for some reason, so define it as error -// so we don't get compiler warnings -#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR - -#define GDISP_USE_GFXNET FALSE -// #define GDISP_GFXNET_PORT 13001 -// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE -// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE -// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GWIN // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GWIN FALSE - -//#define GWIN_NEED_WINDOWMANAGER FALSE -// #define GWIN_REDRAW_IMMEDIATE FALSE -// #define GWIN_REDRAW_SINGLEOP FALSE -// #define GWIN_NEED_FLASHING FALSE -// #define GWIN_FLASHING_PERIOD 250 - -//#define GWIN_NEED_CONSOLE FALSE -// #define GWIN_CONSOLE_USE_HISTORY FALSE -// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE -// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE -// #define GWIN_CONSOLE_ESCSEQ FALSE -// #define GWIN_CONSOLE_USE_BASESTREAM FALSE -// #define GWIN_CONSOLE_USE_FLOAT FALSE -//#define GWIN_NEED_GRAPH FALSE -//#define GWIN_NEED_GL3D FALSE - -//#define GWIN_NEED_WIDGET FALSE -//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 -// #define GWIN_NEED_LABEL FALSE -// #define GWIN_LABEL_ATTRIBUTE FALSE -// #define GWIN_NEED_BUTTON FALSE -// #define GWIN_BUTTON_LAZY_RELEASE FALSE -// #define GWIN_NEED_SLIDER FALSE -// #define GWIN_SLIDER_NOSNAP FALSE -// #define GWIN_SLIDER_DEAD_BAND 5 -// #define GWIN_SLIDER_TOGGLE_INC 20 -// #define GWIN_NEED_CHECKBOX FALSE -// #define GWIN_NEED_IMAGE FALSE -// #define GWIN_NEED_IMAGE_ANIMATION FALSE -// #define GWIN_NEED_RADIO FALSE -// #define GWIN_NEED_LIST FALSE -// #define GWIN_NEED_LIST_IMAGES FALSE -// #define GWIN_NEED_PROGRESSBAR FALSE -// #define GWIN_PROGRESSBAR_AUTO FALSE -// #define GWIN_NEED_KEYBOARD FALSE -// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 -// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE -// #define GWIN_NEED_TEXTEDIT FALSE -// #define GWIN_FLAT_STYLING FALSE -// #define GWIN_WIDGET_TAGS FALSE - -//#define GWIN_NEED_CONTAINERS FALSE -// #define GWIN_NEED_CONTAINER FALSE -// #define GWIN_NEED_FRAME FALSE -// #define GWIN_NEED_TABSET FALSE -// #define GWIN_TABSET_TABHEIGHT 18 - - -/////////////////////////////////////////////////////////////////////////// -// GEVENT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GEVENT TRUE - -//#define GEVENT_ASSERT_NO_RESOURCE FALSE -//#define GEVENT_MAXIMUM_SIZE 32 -//#define GEVENT_MAX_SOURCE_LISTENERS 32 - - -/////////////////////////////////////////////////////////////////////////// -// GTIMER // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GTIMER FALSE - -//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY -//#define GTIMER_THREAD_WORKAREA_SIZE 2048 - - -/////////////////////////////////////////////////////////////////////////// -// GQUEUE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GQUEUE FALSE - -//#define GQUEUE_NEED_ASYNC FALSE -//#define GQUEUE_NEED_GSYNC FALSE -//#define GQUEUE_NEED_FSYNC FALSE -//#define GQUEUE_NEED_BUFFERS FALSE - -/////////////////////////////////////////////////////////////////////////// -// GINPUT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GINPUT FALSE - -//#define GINPUT_NEED_MOUSE FALSE -// #define GINPUT_TOUCH_STARTRAW FALSE -// #define GINPUT_TOUCH_NOTOUCH FALSE -// #define GINPUT_TOUCH_NOCALIBRATE FALSE -// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE -// #define GINPUT_MOUSE_POLL_PERIOD 25 -// #define GINPUT_MOUSE_CLICK_TIME 300 -// #define GINPUT_TOUCH_CXTCLICK_TIME 700 -// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE -// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE -// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 -//#define GINPUT_NEED_KEYBOARD FALSE -// #define GINPUT_KEYBOARD_POLL_PERIOD 200 -// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 -// #define GKEYBOARD_LAYOUT_OFF FALSE -// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE -//#define GINPUT_NEED_TOGGLE FALSE -//#define GINPUT_NEED_DIAL FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GFILE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GFILE FALSE - -//#define GFILE_NEED_PRINTG FALSE -//#define GFILE_NEED_SCANG FALSE -//#define GFILE_NEED_STRINGS FALSE -//#define GFILE_NEED_FILELISTS FALSE -//#define GFILE_NEED_STDIO FALSE -//#define GFILE_NEED_NOAUTOMOUNT FALSE -//#define GFILE_NEED_NOAUTOSYNC FALSE - -//#define GFILE_NEED_MEMFS FALSE -//#define GFILE_NEED_ROMFS FALSE -//#define GFILE_NEED_RAMFS FALSE -//#define GFILE_NEED_FATFS FALSE -//#define GFILE_NEED_NATIVEFS FALSE -//#define GFILE_NEED_CHBIOSFS FALSE - -//#define GFILE_ALLOW_FLOATS FALSE -//#define GFILE_ALLOW_DEVICESPECIFIC FALSE -//#define GFILE_MAX_GFILES 3 - -/////////////////////////////////////////////////////////////////////////// -// GADC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GADC FALSE - -//#define GADC_MAX_LOWSPEED_DEVICES 4 - - -/////////////////////////////////////////////////////////////////////////// -// GAUDIO // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GAUDIO FALSE -// There seems to be a bug in the ugfx code, the wrong define is used -// So define it in order to avoid warnings -#define GFX_USE_GAUDIN GFX_USE_GAUDIO -// #define GAUDIO_NEED_PLAY FALSE -// #define GAUDIO_NEED_RECORD FALSE - - -/////////////////////////////////////////////////////////////////////////// -// GMISC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GMISC TRUE - -//#define GMISC_NEED_ARRAYOPS FALSE -//#define GMISC_NEED_FASTTRIG FALSE -//#define GMISC_NEED_FIXEDTRIG FALSE -//#define GMISC_NEED_INVSQRT FALSE -// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE -// #define GMISC_INVSQRT_REAL_SLOW FALSE -#define GMISC_NEED_MATRIXFLOAT2D TRUE -#define GMISC_NEED_MATRIXFIXED2D FALSE +#include "common_gfxconf.h" #endif /* _GFXCONF_H */ diff --git a/quantum/visualizer/common_gfxconf.h b/quantum/visualizer/common_gfxconf.h new file mode 100644 index 0000000000..eb705b1881 --- /dev/null +++ b/quantum/visualizer/common_gfxconf.h @@ -0,0 +1,325 @@ +/** + * This file has a different license to the rest of the uGFX system. + * You can copy, modify and distribute this file as you see fit. + * You do not need to publish your source modifications to this file. + * The only thing you are not permitted to do is to relicense it + * under a different license. + */ + +/** + * Copy this file into your project directory and rename it as gfxconf.h + * Edit your copy to turn on the uGFX features you want to use. + * The values below are the defaults. + * + * Only remove the comments from lines where you want to change the + * default value. This allows definitions to be included from + * driver makefiles when required and provides the best future + * compatibility for your project. + * + * Please use spaces instead of tabs in this file. + */ + +#ifndef COMMON_GFXCONF_H +#define COMMON_GFXCONF_H + + +/////////////////////////////////////////////////////////////////////////// +// GOS - One of these must be defined, preferably in your Makefile // +/////////////////////////////////////////////////////////////////////////// +//#define GFX_USE_OS_CHIBIOS TRUE +//#define GFX_USE_OS_FREERTOS FALSE +// #define GFX_FREERTOS_USE_TRACE FALSE +//#define GFX_USE_OS_WIN32 FALSE +//#define GFX_USE_OS_LINUX FALSE +//#define GFX_USE_OS_OSX FALSE +//#define GFX_USE_OS_ECOS FALSE +//#define GFX_USE_OS_RAWRTOS FALSE +//#define GFX_USE_OS_ARDUINO FALSE +//#define GFX_USE_OS_KEIL FALSE +//#define GFX_USE_OS_CMSIS FALSE +//#define GFX_USE_OS_RAW32 FALSE +// #define INTERRUPTS_OFF() optional_code +// #define INTERRUPTS_ON() optional_code +// These are not defined by default for some reason +#define GOS_NEED_X_THREADS FALSE +#define GOS_NEED_X_HEAP FALSE + +// Options that (should where relevant) apply to all operating systems + #define GFX_NO_INLINE FALSE +// #define GFX_COMPILER GFX_COMPILER_UNKNOWN +// #define GFX_CPU GFX_CPU_UNKNOWN +// #define GFX_OS_HEAP_SIZE 0 +// #define GFX_OS_NO_INIT FALSE +// #define GFX_OS_INIT_NO_WARNING FALSE +// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine +// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine +// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine + + +/////////////////////////////////////////////////////////////////////////// +// GDISP // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GDISP TRUE + +//#define GDISP_NEED_AUTOFLUSH FALSE +//#define GDISP_NEED_TIMERFLUSH FALSE +//#define GDISP_NEED_VALIDATION TRUE +//#define GDISP_NEED_CLIP TRUE +#define GDISP_NEED_CIRCLE TRUE +#define GDISP_NEED_ELLIPSE TRUE +#define GDISP_NEED_ARC TRUE +#define GDISP_NEED_ARCSECTORS TRUE +#define GDISP_NEED_CONVEX_POLYGON TRUE +//#define GDISP_NEED_SCROLL FALSE +#define GDISP_NEED_PIXELREAD TRUE +#define GDISP_NEED_CONTROL TRUE +//#define GDISP_NEED_QUERY FALSE +//#define GDISP_NEED_MULTITHREAD FALSE +//#define GDISP_NEED_STREAMING FALSE +#define GDISP_NEED_TEXT TRUE +// #define GDISP_NEED_TEXT_WORDWRAP FALSE +// #define GDISP_NEED_ANTIALIAS FALSE +// #define GDISP_NEED_UTF8 FALSE + #define GDISP_NEED_TEXT_KERNING TRUE +// #define GDISP_INCLUDE_FONT_UI1 FALSE +// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. +// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE + #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE +// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE +// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE + #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE +// #define GDISP_INCLUDE_USER_FONTS FALSE + +//#define GDISP_NEED_IMAGE FALSE +// #define GDISP_NEED_IMAGE_NATIVE FALSE +// #define GDISP_NEED_IMAGE_GIF FALSE +// #define GDISP_NEED_IMAGE_BMP FALSE +// #define GDISP_NEED_IMAGE_BMP_1 FALSE +// #define GDISP_NEED_IMAGE_BMP_4 FALSE +// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_8 FALSE +// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_16 FALSE +// #define GDISP_NEED_IMAGE_BMP_24 FALSE +// #define GDISP_NEED_IMAGE_BMP_32 FALSE +// #define GDISP_NEED_IMAGE_JPG FALSE +// #define GDISP_NEED_IMAGE_PNG FALSE +// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE +#ifdef EMULATOR +#define GDISP_NEED_PIXMAP TRUE +#endif +// #define GDISP_NEED_PIXMAP_IMAGE FALSE + +//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. +//#define GDISP_LINEBUF_SIZE 128 +//#define GDISP_STARTUP_COLOR Black +#define GDISP_NEED_STARTUP_LOGO FALSE + +//#define GDISP_TOTAL_DISPLAYS 2 + + #ifdef GDISP_DRIVER_LIST + // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability + #define GDISP_HARDWARE_STREAM_WRITE FALSE + #define GDISP_HARDWARE_STREAM_READ FALSE + #define GDISP_HARDWARE_STREAM_POS FALSE + #define GDISP_HARDWARE_DRAWPIXEL TRUE + #define GDISP_HARDWARE_CLEARS FALSE + #define GDISP_HARDWARE_FILLS FALSE + //#define GDISP_HARDWARE_BITFILLS FALSE + #define GDISP_HARDWARE_SCROLL FALSE + #define GDISP_HARDWARE_PIXELREAD TRUE + #define GDISP_HARDWARE_CONTROL TRUE + #define GDISP_HARDWARE_QUERY FALSE + #define GDISP_HARDWARE_CLIP FALSE + + #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 + #endif + +// The custom format is not defined for some reason, so define it as error +// so we don't get compiler warnings +#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR + +#define GDISP_USE_GFXNET FALSE +// #define GDISP_GFXNET_PORT 13001 +// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE +// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE +// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GWIN // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GWIN FALSE + +//#define GWIN_NEED_WINDOWMANAGER FALSE +// #define GWIN_REDRAW_IMMEDIATE FALSE +// #define GWIN_REDRAW_SINGLEOP FALSE +// #define GWIN_NEED_FLASHING FALSE +// #define GWIN_FLASHING_PERIOD 250 + +//#define GWIN_NEED_CONSOLE FALSE +// #define GWIN_CONSOLE_USE_HISTORY FALSE +// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE +// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE +// #define GWIN_CONSOLE_ESCSEQ FALSE +// #define GWIN_CONSOLE_USE_BASESTREAM FALSE +// #define GWIN_CONSOLE_USE_FLOAT FALSE +//#define GWIN_NEED_GRAPH FALSE +//#define GWIN_NEED_GL3D FALSE + +//#define GWIN_NEED_WIDGET FALSE +//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 +// #define GWIN_NEED_LABEL FALSE +// #define GWIN_LABEL_ATTRIBUTE FALSE +// #define GWIN_NEED_BUTTON FALSE +// #define GWIN_BUTTON_LAZY_RELEASE FALSE +// #define GWIN_NEED_SLIDER FALSE +// #define GWIN_SLIDER_NOSNAP FALSE +// #define GWIN_SLIDER_DEAD_BAND 5 +// #define GWIN_SLIDER_TOGGLE_INC 20 +// #define GWIN_NEED_CHECKBOX FALSE +// #define GWIN_NEED_IMAGE FALSE +// #define GWIN_NEED_IMAGE_ANIMATION FALSE +// #define GWIN_NEED_RADIO FALSE +// #define GWIN_NEED_LIST FALSE +// #define GWIN_NEED_LIST_IMAGES FALSE +// #define GWIN_NEED_PROGRESSBAR FALSE +// #define GWIN_PROGRESSBAR_AUTO FALSE +// #define GWIN_NEED_KEYBOARD FALSE +// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 +// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE +// #define GWIN_NEED_TEXTEDIT FALSE +// #define GWIN_FLAT_STYLING FALSE +// #define GWIN_WIDGET_TAGS FALSE + +//#define GWIN_NEED_CONTAINERS FALSE +// #define GWIN_NEED_CONTAINER FALSE +// #define GWIN_NEED_FRAME FALSE +// #define GWIN_NEED_TABSET FALSE +// #define GWIN_TABSET_TABHEIGHT 18 + + +/////////////////////////////////////////////////////////////////////////// +// GEVENT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GEVENT TRUE + +//#define GEVENT_ASSERT_NO_RESOURCE FALSE +//#define GEVENT_MAXIMUM_SIZE 32 +//#define GEVENT_MAX_SOURCE_LISTENERS 32 + + +/////////////////////////////////////////////////////////////////////////// +// GTIMER // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GTIMER FALSE + +//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY +//#define GTIMER_THREAD_WORKAREA_SIZE 2048 + + +/////////////////////////////////////////////////////////////////////////// +// GQUEUE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GQUEUE FALSE + +//#define GQUEUE_NEED_ASYNC FALSE +//#define GQUEUE_NEED_GSYNC FALSE +//#define GQUEUE_NEED_FSYNC FALSE +//#define GQUEUE_NEED_BUFFERS FALSE + +/////////////////////////////////////////////////////////////////////////// +// GINPUT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GINPUT FALSE + +//#define GINPUT_NEED_MOUSE FALSE +// #define GINPUT_TOUCH_STARTRAW FALSE +// #define GINPUT_TOUCH_NOTOUCH FALSE +// #define GINPUT_TOUCH_NOCALIBRATE FALSE +// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE +// #define GINPUT_MOUSE_POLL_PERIOD 25 +// #define GINPUT_MOUSE_CLICK_TIME 300 +// #define GINPUT_TOUCH_CXTCLICK_TIME 700 +// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE +// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE +// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 +//#define GINPUT_NEED_KEYBOARD FALSE +// #define GINPUT_KEYBOARD_POLL_PERIOD 200 +// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 +// #define GKEYBOARD_LAYOUT_OFF FALSE +// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE +//#define GINPUT_NEED_TOGGLE FALSE +//#define GINPUT_NEED_DIAL FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GFILE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GFILE FALSE + +//#define GFILE_NEED_PRINTG FALSE +//#define GFILE_NEED_SCANG FALSE +//#define GFILE_NEED_STRINGS FALSE +//#define GFILE_NEED_FILELISTS FALSE +//#define GFILE_NEED_STDIO FALSE +//#define GFILE_NEED_NOAUTOMOUNT FALSE +//#define GFILE_NEED_NOAUTOSYNC FALSE + +//#define GFILE_NEED_MEMFS FALSE +//#define GFILE_NEED_ROMFS FALSE +//#define GFILE_NEED_RAMFS FALSE +//#define GFILE_NEED_FATFS FALSE +//#define GFILE_NEED_NATIVEFS FALSE +//#define GFILE_NEED_CHBIOSFS FALSE + +//#define GFILE_ALLOW_FLOATS FALSE +//#define GFILE_ALLOW_DEVICESPECIFIC FALSE +//#define GFILE_MAX_GFILES 3 + +/////////////////////////////////////////////////////////////////////////// +// GADC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GADC FALSE + +//#define GADC_MAX_LOWSPEED_DEVICES 4 + + +/////////////////////////////////////////////////////////////////////////// +// GAUDIO // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GAUDIO FALSE +// There seems to be a bug in the ugfx code, the wrong define is used +// So define it in order to avoid warnings +#define GFX_USE_GAUDIN GFX_USE_GAUDIO +// #define GAUDIO_NEED_PLAY FALSE +// #define GAUDIO_NEED_RECORD FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GMISC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GMISC TRUE + +//#define GMISC_NEED_ARRAYOPS FALSE +//#define GMISC_NEED_FASTTRIG FALSE +//#define GMISC_NEED_FIXEDTRIG FALSE +//#define GMISC_NEED_INVSQRT FALSE +// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE +// #define GMISC_INVSQRT_REAL_SLOW FALSE +#define GMISC_NEED_MATRIXFLOAT2D TRUE +#define GMISC_NEED_MATRIXFIXED2D FALSE + +#endif /* COMMON_GFXCONF_H */ diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk index 0f7d8636cf..1fe7435d97 100644 --- a/quantum/visualizer/visualizer.mk +++ b/quantum/visualizer/visualizer.mk @@ -47,6 +47,9 @@ SRC += $(VISUALIZER_DIR)/led_keyframes.c endif include $(GFXLIB)/gfx.mk +# For the common_gfxconf.h +GFXINC += quantum/visualizer + GFXSRC := $(patsubst $(TOP_DIR)/%,%,$(GFXSRC)) GFXDEFS := $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS))) -- cgit v1.2.3 From 2251560256ff1a139178dc80b18dd8ef1d8e83d6 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 9 Jul 2017 17:46:51 +0300 Subject: Clarify naming between LCD_BACKLIGHT and LED_BACKLIGHT --- keyboards/ergodox/infinity/animations.c | 44 ++++---- keyboards/ergodox/infinity/simple_visualizer.h | 2 +- keyboards/ergodox/infinity/visualizer.c | 4 +- keyboards/whitefox/animations.c | 36 +++---- lcd_backlight_keyframes.h | 30 ++++++ quantum/visualizer/lcd_backlight_keyframes.c | 8 +- quantum/visualizer/lcd_backlight_keyframes.h | 30 ------ quantum/visualizer/led_backlight_keyframes.c | 143 +++++++++++++++++++++++++ quantum/visualizer/led_backlight_keyframes.h | 44 ++++++++ quantum/visualizer/led_keyframes.c | 143 ------------------------- quantum/visualizer/led_keyframes.h | 44 -------- quantum/visualizer/visualizer.mk | 2 +- 12 files changed, 265 insertions(+), 265 deletions(-) create mode 100644 lcd_backlight_keyframes.h delete mode 100644 quantum/visualizer/lcd_backlight_keyframes.h create mode 100644 quantum/visualizer/led_backlight_keyframes.c create mode 100644 quantum/visualizer/led_backlight_keyframes.h delete mode 100644 quantum/visualizer/led_keyframes.c delete mode 100644 quantum/visualizer/led_keyframes.h diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c index ebc08fde36..faac96215a 100644 --- a/keyboards/ergodox/infinity/animations.c +++ b/keyboards/ergodox/infinity/animations.c @@ -26,7 +26,7 @@ #endif #ifdef BACKLIGHT_ENABLE -#include "led_keyframes.h" +#include "led_backlight_keyframes.h" #endif #include "visualizer_keyframes.h" @@ -39,10 +39,10 @@ static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* lcd_keyframe_enable(animation, state); #endif #ifdef LCD_BACKLIGHT_ENABLE - backlight_keyframe_enable(animation, state); + lcd_backlight_keyframe_enable(animation, state); #endif #ifdef BACKLIGHT_ENABLE - led_keyframe_enable(animation, state); + led_backlight_keyframe_enable(animation, state); #endif return false; } @@ -52,10 +52,10 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t lcd_keyframe_disable(animation, state); #endif #ifdef LCD_BACKLIGHT_ENABLE - backlight_keyframe_disable(animation, state); + lcd_backlight_keyframe_disable(animation, state); #endif #ifdef BACKLIGHT_ENABLE - led_keyframe_disable(animation, state); + led_backlight_keyframe_disable(animation, state); #endif return false; } @@ -63,10 +63,10 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { bool ret = false; #ifdef LCD_BACKLIGHT_ENABLE - ret |= backlight_keyframe_animate_color(animation, state); + ret |= lcd_backlight_keyframe_animate_color(animation, state); #endif #ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_in_all(animation, state); + ret |= led_backlight_keyframe_fade_in_all(animation, state); #endif return ret; } @@ -74,10 +74,10 @@ static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { bool ret = false; #ifdef LCD_BACKLIGHT_ENABLE - ret |= backlight_keyframe_animate_color(animation, state); + ret |= lcd_backlight_keyframe_animate_color(animation, state); #endif #ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_out_all(animation, state); + ret |= led_backlight_keyframe_fade_out_all(animation, state); #endif return ret; } @@ -133,20 +133,20 @@ keyframe_animation_t led_test_animation = { }, .frame_functions = { - led_keyframe_fade_in_all, + led_backlight_keyframe_fade_in_all, keyframe_no_operation, - led_keyframe_fade_out_all, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_mirror_orientation, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_normal_orientation, - led_keyframe_crossfade, + led_backlight_keyframe_fade_out_all, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_left_to_right_gradient, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_top_to_bottom_gradient, + led_backlight_keyframe_mirror_orientation, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_left_to_right_gradient, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_top_to_bottom_gradient, + led_backlight_keyframe_normal_orientation, + led_backlight_keyframe_crossfade, }, }; #endif diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h index ded8a3222e..88e96f2af9 100644 --- a/keyboards/ergodox/infinity/simple_visualizer.h +++ b/keyboards/ergodox/infinity/simple_visualizer.h @@ -58,7 +58,7 @@ static keyframe_animation_t color_animation = { // this prevents the color from changing when activating the layer // momentarily .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, - .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color}, + .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color}, }; void initialize_user_visualizer(visualizer_state_t* state) { diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c index 5b6b320074..047a1119ce 100644 --- a/keyboards/ergodox/infinity/visualizer.c +++ b/keyboards/ergodox/infinity/visualizer.c @@ -79,7 +79,7 @@ static keyframe_animation_t one_led_color = { .num_frames = 1, .loop = false, .frame_lengths = {gfxMillisecondsToTicks(0)}, - .frame_functions = {backlight_keyframe_set_color}, + .frame_functions = {lcd_backlight_keyframe_set_color}, }; bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) { @@ -94,7 +94,7 @@ static keyframe_animation_t two_led_colors = { .num_frames = 2, .loop = true, .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)}, - .frame_functions = {backlight_keyframe_set_color, swap_led_target_color}, + .frame_functions = {lcd_backlight_keyframe_set_color, swap_led_target_color}, }; // The LCD animation alternates between the layer name display and a diff --git a/keyboards/whitefox/animations.c b/keyboards/whitefox/animations.c index ed1d75efb8..a15d46ccda 100644 --- a/keyboards/whitefox/animations.c +++ b/keyboards/whitefox/animations.c @@ -20,7 +20,7 @@ #include "visualizer.h" #ifdef BACKLIGHT_ENABLE -#include "led_keyframes.h" +#include "led_backlight_keyframes.h" #endif #include "visualizer_keyframes.h" @@ -30,14 +30,14 @@ static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { #ifdef BACKLIGHT_ENABLE - led_keyframe_enable(animation, state); + led_backlight_keyframe_enable(animation, state); #endif return false; } static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { #ifdef BACKLIGHT_ENABLE - led_keyframe_disable(animation, state); + led_backlight_keyframe_disable(animation, state); #endif return false; } @@ -45,7 +45,7 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { bool ret = false; #ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_in_all(animation, state); + ret |= led_backlight_keyframe_fade_in_all(animation, state); #endif return ret; } @@ -53,7 +53,7 @@ static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { bool ret = false; #ifdef BACKLIGHT_ENABLE - ret |= led_keyframe_fade_out_all(animation, state); + ret |= led_backlight_keyframe_fade_out_all(animation, state); #endif return ret; } @@ -107,20 +107,20 @@ keyframe_animation_t led_test_animation = { }, .frame_functions = { - led_keyframe_fade_in_all, + led_backlight_keyframe_fade_in_all, keyframe_no_operation, - led_keyframe_fade_out_all, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_mirror_orientation, - led_keyframe_crossfade, - led_keyframe_left_to_right_gradient, - led_keyframe_crossfade, - led_keyframe_top_to_bottom_gradient, - led_keyframe_normal_orientation, - led_keyframe_crossfade, + led_backlight_keyframe_fade_out_all, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_left_to_right_gradient, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_top_to_bottom_gradient, + led_backlight_keyframe_mirror_orientation, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_left_to_right_gradient, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_top_to_bottom_gradient, + led_backlight_keyframe_normal_orientation, + led_backlight_keyframe_crossfade, }, }; #endif diff --git a/lcd_backlight_keyframes.h b/lcd_backlight_keyframes.h new file mode 100644 index 0000000000..bde118449b --- /dev/null +++ b/lcd_backlight_keyframes.h @@ -0,0 +1,30 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ +#define QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ + +#include "visualizer.h" + +// Animates the LCD backlight color between the current color and the target color (of the state) +bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state); +// Sets the backlight color to the target color +bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state); + +bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state); +bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state); + +#endif /* QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ */ diff --git a/quantum/visualizer/lcd_backlight_keyframes.c b/quantum/visualizer/lcd_backlight_keyframes.c index 8436d4e3dd..8c402baf6c 100644 --- a/quantum/visualizer/lcd_backlight_keyframes.c +++ b/quantum/visualizer/lcd_backlight_keyframes.c @@ -16,7 +16,7 @@ #include "lcd_backlight_keyframes.h" -bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state) { +bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state) { int frame_length = animation->frame_lengths[animation->current_frame]; int current_pos = frame_length - animation->time_left_in_frame; uint8_t t_h = LCD_HUE(state->target_lcd_color); @@ -49,7 +49,7 @@ bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualize return true; } -bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state) { +bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state) { (void)animation; state->prev_lcd_color = state->target_lcd_color; state->current_lcd_color = state->target_lcd_color; @@ -60,14 +60,14 @@ bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_st return false; } -bool backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { +bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { (void)animation; (void)state; lcd_backlight_hal_color(0, 0, 0); return false; } -bool backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { +bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { (void)animation; (void)state; lcd_backlight_color(LCD_HUE(state->current_lcd_color), diff --git a/quantum/visualizer/lcd_backlight_keyframes.h b/quantum/visualizer/lcd_backlight_keyframes.h deleted file mode 100644 index e1c125cf91..0000000000 --- a/quantum/visualizer/lcd_backlight_keyframes.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ -#define QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ - -#include "visualizer.h" - -// Animates the LCD backlight color between the current color and the target color (of the state) -bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state); -// Sets the backlight color to the target color -bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state); - -bool backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state); -bool backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state); - -#endif /* QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ */ diff --git a/quantum/visualizer/led_backlight_keyframes.c b/quantum/visualizer/led_backlight_keyframes.c new file mode 100644 index 0000000000..d2921a391a --- /dev/null +++ b/quantum/visualizer/led_backlight_keyframes.c @@ -0,0 +1,143 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ +#include "gfx.h" +#include "math.h" +#include "led_backlight_keyframes.h" + +static uint8_t fade_led_color(keyframe_animation_t* animation, int from, int to) { + int frame_length = animation->frame_lengths[animation->current_frame]; + int current_pos = frame_length - animation->time_left_in_frame; + int delta = to - from; + int luma = (delta * current_pos) / frame_length; + luma += from; + return luma; +} + +static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) { + uint8_t luma = fade_led_color(animation, from, to); + color_t color = LUMA2COLOR(luma); + gdispGClear(LED_DISPLAY, color); +} + +// TODO: Should be customizable per keyboard +#define NUM_ROWS LED_NUM_ROWS +#define NUM_COLS LED_NUM_COLS + +static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS]; +static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS]; + +static uint8_t compute_gradient_color(float t, float index, float num) { + const float two_pi = M_PI * 2.0f; + float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi; + float x = t * two_pi + normalized_index; + float v = 0.5 * (cosf(x) + 1.0f); + return (uint8_t)(255.0f * v); +} + +bool led_backlight_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + keyframe_fade_all_leds_from_to(animation, 0, 255); + return true; +} + +bool led_backlight_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + keyframe_fade_all_leds_from_to(animation, 255, 0); + return true; +} + +bool led_backlight_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + float frame_length = animation->frame_lengths[animation->current_frame]; + float current_pos = frame_length - animation->time_left_in_frame; + float t = current_pos / frame_length; + for (int i=0; i< NUM_COLS; i++) { + uint8_t color = compute_gradient_color(t, i, NUM_COLS); + gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color)); + } + return true; +} + +bool led_backlight_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + float frame_length = animation->frame_lengths[animation->current_frame]; + float current_pos = frame_length - animation->time_left_in_frame; + float t = current_pos / frame_length; + for (int i=0; i< NUM_ROWS; i++) { + uint8_t color = compute_gradient_color(t, i, NUM_ROWS); + gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color)); + } + return true; +} + +static void copy_current_led_state(uint8_t* dest) { + for (int i=0;ifirst_update_of_frame) { + copy_current_led_state(&crossfade_start_frame[0][0]); + run_next_keyframe(animation, state); + copy_current_led_state(&crossfade_end_frame[0][0]); + } + for (int i=0;iframe_lengths[animation->current_frame]; - int current_pos = frame_length - animation->time_left_in_frame; - int delta = to - from; - int luma = (delta * current_pos) / frame_length; - luma += from; - return luma; -} - -static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) { - uint8_t luma = fade_led_color(animation, from, to); - color_t color = LUMA2COLOR(luma); - gdispGClear(LED_DISPLAY, color); -} - -// TODO: Should be customizable per keyboard -#define NUM_ROWS LED_NUM_ROWS -#define NUM_COLS LED_NUM_COLS - -static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS]; -static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS]; - -static uint8_t compute_gradient_color(float t, float index, float num) { - const float two_pi = M_PI * 2.0f; - float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi; - float x = t * two_pi + normalized_index; - float v = 0.5 * (cosf(x) + 1.0f); - return (uint8_t)(255.0f * v); -} - -bool led_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - keyframe_fade_all_leds_from_to(animation, 0, 255); - return true; -} - -bool led_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - keyframe_fade_all_leds_from_to(animation, 255, 0); - return true; -} - -bool led_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - float frame_length = animation->frame_lengths[animation->current_frame]; - float current_pos = frame_length - animation->time_left_in_frame; - float t = current_pos / frame_length; - for (int i=0; i< NUM_COLS; i++) { - uint8_t color = compute_gradient_color(t, i, NUM_COLS); - gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color)); - } - return true; -} - -bool led_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - float frame_length = animation->frame_lengths[animation->current_frame]; - float current_pos = frame_length - animation->time_left_in_frame; - float t = current_pos / frame_length; - for (int i=0; i< NUM_ROWS; i++) { - uint8_t color = compute_gradient_color(t, i, NUM_ROWS); - gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color)); - } - return true; -} - -static void copy_current_led_state(uint8_t* dest) { - for (int i=0;ifirst_update_of_frame) { - copy_current_led_state(&crossfade_start_frame[0][0]); - run_next_keyframe(animation, state); - copy_current_led_state(&crossfade_end_frame[0][0]); - } - for (int i=0;i Date: Sun, 9 Jul 2017 17:50:01 +0300 Subject: Shared default animations --- keyboards/ergodox/infinity/animations.c | 154 ---------------------- keyboards/ergodox/infinity/animations.h | 30 ----- keyboards/ergodox/infinity/rules.mk | 3 +- keyboards/ergodox/infinity/simple_visualizer.h | 2 +- keyboards/ergodox/infinity/visualizer.c | 2 +- keyboards/whitefox/animations.c | 128 ------------------ keyboards/whitefox/animations.h | 30 ----- keyboards/whitefox/rules.mk | 3 +- keyboards/whitefox/visualizer.c | 2 +- quantum/visualizer/default_animations.c | 176 +++++++++++++++++++++++++ quantum/visualizer/default_animations.h | 30 +++++ quantum/visualizer/visualizer.mk | 2 + 12 files changed, 213 insertions(+), 349 deletions(-) delete mode 100644 keyboards/ergodox/infinity/animations.c delete mode 100644 keyboards/ergodox/infinity/animations.h delete mode 100644 keyboards/whitefox/animations.c delete mode 100644 keyboards/whitefox/animations.h create mode 100644 quantum/visualizer/default_animations.c create mode 100644 quantum/visualizer/default_animations.h diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c deleted file mode 100644 index faac96215a..0000000000 --- a/keyboards/ergodox/infinity/animations.c +++ /dev/null @@ -1,154 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#if defined(VISUALIZER_ENABLE) - -#include "animations.h" -#include "visualizer.h" -#ifdef LCD_ENABLE -#include "lcd_keyframes.h" -#endif -#ifdef LCD_BACKLIGHT_ENABLE -#include "lcd_backlight_keyframes.h" -#endif - -#ifdef BACKLIGHT_ENABLE -#include "led_backlight_keyframes.h" -#endif - -#include "visualizer_keyframes.h" - - -#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE) - -static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef LCD_ENABLE - lcd_keyframe_enable(animation, state); -#endif -#ifdef LCD_BACKLIGHT_ENABLE - lcd_backlight_keyframe_enable(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - led_backlight_keyframe_enable(animation, state); -#endif - return false; -} - -static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef LCD_ENABLE - lcd_keyframe_disable(animation, state); -#endif -#ifdef LCD_BACKLIGHT_ENABLE - lcd_backlight_keyframe_disable(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - led_backlight_keyframe_disable(animation, state); -#endif - return false; -} - -static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef LCD_BACKLIGHT_ENABLE - ret |= lcd_backlight_keyframe_animate_color(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - ret |= led_backlight_keyframe_fade_in_all(animation, state); -#endif - return ret; -} - -static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef LCD_BACKLIGHT_ENABLE - ret |= lcd_backlight_keyframe_animate_color(animation, state); -#endif -#ifdef BACKLIGHT_ENABLE - ret |= led_backlight_keyframe_fade_out_all(animation, state); -#endif - return ret; -} - - -// Don't worry, if the startup animation is long, you can use the keyboard like normal -// during that time -keyframe_animation_t default_startup_animation = { - .num_frames = 3, - .loop = false, - .frame_lengths = {0, 0, gfxMillisecondsToTicks(5000)}, - .frame_functions = { - keyframe_enable, - lcd_keyframe_draw_logo, - keyframe_fade_in, - }, -}; - -keyframe_animation_t default_suspend_animation = { - .num_frames = 3, - .loop = false, - .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0}, - .frame_functions = { - lcd_keyframe_display_layer_text, - keyframe_fade_out, - keyframe_disable, - }, -}; -#endif - -#if defined(BACKLIGHT_ENABLE) -#define CROSSFADE_TIME 1000 -#define GRADIENT_TIME 3000 - -keyframe_animation_t led_test_animation = { - .num_frames = 14, - .loop = true, - .frame_lengths = { - gfxMillisecondsToTicks(1000), // fade in - gfxMillisecondsToTicks(1000), // no op (leds on) - gfxMillisecondsToTicks(1000), // fade out - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // mirror leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // normal leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - - }, - .frame_functions = { - led_backlight_keyframe_fade_in_all, - keyframe_no_operation, - led_backlight_keyframe_fade_out_all, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_left_to_right_gradient, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_top_to_bottom_gradient, - led_backlight_keyframe_mirror_orientation, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_left_to_right_gradient, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_top_to_bottom_gradient, - led_backlight_keyframe_normal_orientation, - led_backlight_keyframe_crossfade, - }, -}; -#endif - -#endif diff --git a/keyboards/ergodox/infinity/animations.h b/keyboards/ergodox/infinity/animations.h deleted file mode 100644 index 6d8b9830d9..0000000000 --- a/keyboards/ergodox/infinity/animations.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ -#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ - -#include "visualizer.h" - -// You can use these default animations, but of course you can also write your own custom ones instead -extern keyframe_animation_t default_startup_animation; -extern keyframe_animation_t default_suspend_animation; - -// An animation for testing and demonstrating the led support, should probably not be used for real world -// cases -extern keyframe_animation_t led_test_animation; - -#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */ diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index 18171560da..2ccf98b8c5 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -1,7 +1,6 @@ # project specific files SRC = matrix.c \ - led.c \ - animations.c + led.c ## chip/board settings # - the next two should match the directories in diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h index 88e96f2af9..73d0e08870 100644 --- a/keyboards/ergodox/infinity/simple_visualizer.h +++ b/keyboards/ergodox/infinity/simple_visualizer.h @@ -34,7 +34,7 @@ #include "lcd_backlight_keyframes.h" #include "system/serial_link.h" #include "led.h" -#include "animations.h" +#include "default_animations.h" static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); static const uint32_t initial_color = LCD_COLOR(0, 0, 0); diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c index 047a1119ce..4b16021abc 100644 --- a/keyboards/ergodox/infinity/visualizer.c +++ b/keyboards/ergodox/infinity/visualizer.c @@ -31,7 +31,7 @@ along with this program. If not, see . #include "lcd_keyframes.h" #include "lcd_backlight_keyframes.h" #include "system/serial_link.h" -#include "animations.h" +#include "default_animations.h" static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); static const uint32_t initial_color = LCD_COLOR(0, 0, 0); diff --git a/keyboards/whitefox/animations.c b/keyboards/whitefox/animations.c deleted file mode 100644 index a15d46ccda..0000000000 --- a/keyboards/whitefox/animations.c +++ /dev/null @@ -1,128 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#if defined(VISUALIZER_ENABLE) - -#include "animations.h" -#include "visualizer.h" - -#ifdef BACKLIGHT_ENABLE -#include "led_backlight_keyframes.h" -#endif - -#include "visualizer_keyframes.h" - - -#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE) - -static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef BACKLIGHT_ENABLE - led_backlight_keyframe_enable(animation, state); -#endif - return false; -} - -static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { -#ifdef BACKLIGHT_ENABLE - led_backlight_keyframe_disable(animation, state); -#endif - return false; -} - -static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef BACKLIGHT_ENABLE - ret |= led_backlight_keyframe_fade_in_all(animation, state); -#endif - return ret; -} - -static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -#ifdef BACKLIGHT_ENABLE - ret |= led_backlight_keyframe_fade_out_all(animation, state); -#endif - return ret; -} - - -// Don't worry, if the startup animation is long, you can use the keyboard like normal -// during that time -keyframe_animation_t default_startup_animation = { - .num_frames = 2, - .loop = false, - .frame_lengths = {0, gfxMillisecondsToTicks(5000)}, - .frame_functions = { - keyframe_enable, - keyframe_fade_in, - }, -}; - -keyframe_animation_t default_suspend_animation = { - .num_frames = 2, - .loop = false, - .frame_lengths = {gfxMillisecondsToTicks(1000), 0}, - .frame_functions = { - keyframe_fade_out, - keyframe_disable, - }, -}; -#endif - -#if defined(BACKLIGHT_ENABLE) -#define CROSSFADE_TIME 1000 -#define GRADIENT_TIME 3000 - -keyframe_animation_t led_test_animation = { - .num_frames = 14, - .loop = true, - .frame_lengths = { - gfxMillisecondsToTicks(1000), // fade in - gfxMillisecondsToTicks(1000), // no op (leds on) - gfxMillisecondsToTicks(1000), // fade out - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // mirror leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // normal leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - - }, - .frame_functions = { - led_backlight_keyframe_fade_in_all, - keyframe_no_operation, - led_backlight_keyframe_fade_out_all, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_left_to_right_gradient, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_top_to_bottom_gradient, - led_backlight_keyframe_mirror_orientation, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_left_to_right_gradient, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_top_to_bottom_gradient, - led_backlight_keyframe_normal_orientation, - led_backlight_keyframe_crossfade, - }, -}; -#endif - -#endif diff --git a/keyboards/whitefox/animations.h b/keyboards/whitefox/animations.h deleted file mode 100644 index 6d8b9830d9..0000000000 --- a/keyboards/whitefox/animations.h +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ -#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ - -#include "visualizer.h" - -// You can use these default animations, but of course you can also write your own custom ones instead -extern keyframe_animation_t default_startup_animation; -extern keyframe_animation_t default_suspend_animation; - -// An animation for testing and demonstrating the led support, should probably not be used for real world -// cases -extern keyframe_animation_t led_test_animation; - -#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */ diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index c0effcb7b7..3911480718 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -1,7 +1,6 @@ # project specific files SRC = matrix.c \ - led.c \ - animations.c + led.c ## chip/board settings # - the next two should match the directories in diff --git a/keyboards/whitefox/visualizer.c b/keyboards/whitefox/visualizer.c index 167e0ec4de..e5bafcbe95 100644 --- a/keyboards/whitefox/visualizer.c +++ b/keyboards/whitefox/visualizer.c @@ -20,7 +20,7 @@ #include "visualizer.h" #include "visualizer_keyframes.h" #include "led.h" -#include "animations.h" +#include "default_animations.h" static bool initial_update = true; diff --git a/quantum/visualizer/default_animations.c b/quantum/visualizer/default_animations.c new file mode 100644 index 0000000000..2d03273720 --- /dev/null +++ b/quantum/visualizer/default_animations.c @@ -0,0 +1,176 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#if defined(VISUALIZER_ENABLE) + +#include "default_animations.h" +#include "visualizer.h" +#ifdef LCD_ENABLE +#include "lcd_keyframes.h" +#endif +#ifdef LCD_BACKLIGHT_ENABLE +#include "lcd_backlight_keyframes.h" +#endif + +#ifdef BACKLIGHT_ENABLE +#include "led_backlight_keyframes.h" +#endif + +#include "visualizer_keyframes.h" + + +#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE) + +static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { +#ifdef LCD_ENABLE + lcd_keyframe_enable(animation, state); +#endif +#ifdef LCD_BACKLIGHT_ENABLE + lcd_backlight_keyframe_enable(animation, state); +#endif +#ifdef BACKLIGHT_ENABLE + led_backlight_keyframe_enable(animation, state); +#endif + return false; +} + +static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { +#ifdef LCD_ENABLE + lcd_keyframe_disable(animation, state); +#endif +#ifdef LCD_BACKLIGHT_ENABLE + lcd_backlight_keyframe_disable(animation, state); +#endif +#ifdef BACKLIGHT_ENABLE + led_backlight_keyframe_disable(animation, state); +#endif + return false; +} + +static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { + bool ret = false; +#ifdef LCD_BACKLIGHT_ENABLE + ret |= lcd_backlight_keyframe_animate_color(animation, state); +#endif +#ifdef BACKLIGHT_ENABLE + ret |= led_backlight_keyframe_fade_in_all(animation, state); +#endif + return ret; +} + +static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { + bool ret = false; +#ifdef LCD_BACKLIGHT_ENABLE + ret |= lcd_backlight_keyframe_animate_color(animation, state); +#endif +#ifdef BACKLIGHT_ENABLE + ret |= led_backlight_keyframe_fade_out_all(animation, state); +#endif + return ret; +} + + +// Don't worry, if the startup animation is long, you can use the keyboard like normal +// during that time +keyframe_animation_t default_startup_animation = { +#if LCD_ENABLE + .num_frames = 3, +#else + .num_frames = 2, +#endif + .loop = false, + .frame_lengths = { + 0, +#if LCD_ENABLE + 0, +#endif + gfxMillisecondsToTicks(5000)}, + .frame_functions = { + keyframe_enable, +#if LCD_ENABLE + lcd_keyframe_draw_logo, +#endif + keyframe_fade_in, + }, +}; + +keyframe_animation_t default_suspend_animation = { +#if LCD_ENABLE + .num_frames = 3, +#else + .num_frames = 2, +#endif + .loop = false, + .frame_lengths = { +#if LCD_ENABLE + 0, +#endif + gfxMillisecondsToTicks(1000), + 0}, + .frame_functions = { +#if LCD_ENABLE + lcd_keyframe_display_layer_text, +#endif + keyframe_fade_out, + keyframe_disable, + }, +}; +#endif + +#if defined(BACKLIGHT_ENABLE) +#define CROSSFADE_TIME 1000 +#define GRADIENT_TIME 3000 + +keyframe_animation_t led_test_animation = { + .num_frames = 14, + .loop = true, + .frame_lengths = { + gfxMillisecondsToTicks(1000), // fade in + gfxMillisecondsToTicks(1000), // no op (leds on) + gfxMillisecondsToTicks(1000), // fade out + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // mirror leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // normal leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + + }, + .frame_functions = { + led_backlight_keyframe_fade_in_all, + keyframe_no_operation, + led_backlight_keyframe_fade_out_all, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_left_to_right_gradient, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_top_to_bottom_gradient, + led_backlight_keyframe_mirror_orientation, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_left_to_right_gradient, + led_backlight_keyframe_crossfade, + led_backlight_keyframe_top_to_bottom_gradient, + led_backlight_keyframe_normal_orientation, + led_backlight_keyframe_crossfade, + }, +}; +#endif + +#endif diff --git a/quantum/visualizer/default_animations.h b/quantum/visualizer/default_animations.h new file mode 100644 index 0000000000..51320b8b8a --- /dev/null +++ b/quantum/visualizer/default_animations.h @@ -0,0 +1,30 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef DEFAULT_ANIMATIONS_H_ +#define DEFAULT_ANIMATIONS_H_ + +#include "visualizer.h" + +// You can use these default animations, but of course you can also write your own custom ones instead +extern keyframe_animation_t default_startup_animation; +extern keyframe_animation_t default_suspend_animation; + +// An animation for testing and demonstrating the led support, should probably not be used for real world +// cases +extern keyframe_animation_t led_test_animation; + +#endif /* DEFAULT_ANIMATIONS_H_ */ diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk index a04c9775fa..3a0f771bca 100644 --- a/quantum/visualizer/visualizer.mk +++ b/quantum/visualizer/visualizer.mk @@ -46,6 +46,8 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) SRC += $(VISUALIZER_DIR)/led_backlight_keyframes.c endif +SRC += $(VISUALIZER_DIR)/default_animations.c + include $(GFXLIB)/gfx.mk # For the common_gfxconf.h GFXINC += quantum/visualizer -- cgit v1.2.3 From 9d8279960d8784d5602025f6845b0af92db12848 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 9 Jul 2017 20:35:33 +0300 Subject: Make it easier to use drivers --- drivers/ugfx/gdisp/is31fl3731c/driver.mk | 1 + drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c | 12 +++----- drivers/ugfx/gdisp/st7565/driver.mk | 1 + drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c | 4 +-- keyboards/ergodox/infinity/board_IS31FL3731C.h | 3 -- keyboards/ergodox/infinity/config.h | 5 ---- keyboards/ergodox/infinity/gfxconf.h | 6 ---- keyboards/ergodox/infinity/rules.mk | 9 ++++-- keyboards/whitefox/board_IS31FL3731C.h | 3 -- keyboards/whitefox/config.h | 8 +---- keyboards/whitefox/gfxconf.h | 4 --- keyboards/whitefox/rules.mk | 4 ++- quantum/visualizer/lcd_keyframes.c | 4 +-- quantum/visualizer/led_backlight_keyframes.c | 4 +-- quantum/visualizer/visualizer.mk | 35 ++++++++++++++++++++++ 15 files changed, 58 insertions(+), 45 deletions(-) diff --git a/drivers/ugfx/gdisp/is31fl3731c/driver.mk b/drivers/ugfx/gdisp/is31fl3731c/driver.mk index c9de62d1e8..4364787c90 100644 --- a/drivers/ugfx/gdisp/is31fl3731c/driver.mk +++ b/drivers/ugfx/gdisp/is31fl3731c/driver.mk @@ -1,2 +1,3 @@ GFXINC += drivers/ugfx/gdisp/is31fl3731c GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c +GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK \ No newline at end of file diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c index 0691dbfbf3..3faddcda8b 100644 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c +++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c @@ -19,7 +19,10 @@ along with this program. If not, see . #if GFX_USE_GDISP -#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK +#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK +#define GDISP_SCREEN_HEIGHT LED_HEIGHT +#define GDISP_SCREEN_WIDTH LED_WIDTH + #include "gdisp_lld_config.h" #include "src/gdisp/gdisp_driver.h" @@ -33,12 +36,6 @@ extern const uint8_t CIE1931_CURVE[]; /* Driver local definitions. */ /*===========================================================================*/ -#ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 9 -#endif -#ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 16 -#endif #ifndef GDISP_INITIAL_CONTRAST #define GDISP_INITIAL_CONTRAST 0 #endif @@ -100,7 +97,6 @@ extern const uint8_t CIE1931_CURVE[]; #define IS31_PWM_SIZE 0x90 #define IS31_LED_MASK_SIZE 0x12 -#define IS31_SCREEN_WIDTH 16 #define IS31 diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk index 0190b60194..31fc8f1c76 100644 --- a/drivers/ugfx/gdisp/st7565/driver.mk +++ b/drivers/ugfx/gdisp/st7565/driver.mk @@ -1,2 +1,3 @@ GFXINC += drivers/ugfx/gdisp/st7565 GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c +GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK \ No newline at end of file diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c index 55552cb795..4a4c83e891 100644 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c +++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c @@ -20,10 +20,10 @@ /*===========================================================================*/ #ifndef GDISP_SCREEN_HEIGHT -#define GDISP_SCREEN_HEIGHT 32 +#define GDISP_SCREEN_HEIGHT LCD_HEIGHT #endif #ifndef GDISP_SCREEN_WIDTH -#define GDISP_SCREEN_WIDTH 128 +#define GDISP_SCREEN_WIDTH LCD_WIDTH #endif #ifndef GDISP_INITIAL_CONTRAST #define GDISP_INITIAL_CONTRAST 35 diff --git a/keyboards/ergodox/infinity/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_IS31FL3731C.h index 2ea73f1fb3..f248cc25ba 100644 --- a/keyboards/ergodox/infinity/board_IS31FL3731C.h +++ b/keyboards/ergodox/infinity/board_IS31FL3731C.h @@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = { 400000 // clock speed (Hz); 400kHz max for IS31 }; -#define GDISP_SCREEN_WIDTH 7 -#define GDISP_SCREEN_HEIGHT 7 - static const uint8_t led_mask[] = { 0xFF, 0x00, /* C1-1 -> C1-16 */ 0xFF, 0x00, /* C2-1 -> C2-16 */ diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h index fa157a893f..c46edeb7b2 100644 --- a/keyboards/ergodox/infinity/config.h +++ b/keyboards/ergodox/infinity/config.h @@ -54,11 +54,6 @@ along with this program. If not, see . #define VISUALIZER_USER_DATA_SIZE 16 -#define LCD_DISPLAY_NUMBER 0 -#define LED_DISPLAY_NUMBER 1 - -#define LED_NUM_ROWS 7 -#define LED_NUM_COLS 7 /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h index 0d017aea97..ca338399d3 100644 --- a/keyboards/ergodox/infinity/gfxconf.h +++ b/keyboards/ergodox/infinity/gfxconf.h @@ -22,12 +22,6 @@ #ifndef _GFXCONF_H #define _GFXCONF_H -#ifndef EMULATOR -#define GDISP_DRIVER_LIST GDISPVMT_ST7565_QMK, GDISPVMT_IS31FL3731C_QMK -#else -#define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX -#endif - #include "common_gfxconf.h" #endif /* _GFXCONF_H */ diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index 2ccf98b8c5..a341bbfce8 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -66,5 +66,10 @@ LCD_BACKLIGHT_ENABLE = yes MIDI_ENABLE = no RGBLIGHT_ENABLE = no -include $(TOP_DIR)/drivers/ugfx/gdisp/st7565/driver.mk -include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk \ No newline at end of file +LCD_DRIVER = st7565 +LCD_WIDTH = 128 +LCD_HEIGHT = 32 + +LED_DRIVER = is31fl3731c +LED_WIDTH = 7 +LED_HEIGHT = 7 \ No newline at end of file diff --git a/keyboards/whitefox/board_IS31FL3731C.h b/keyboards/whitefox/board_IS31FL3731C.h index 3dc5327a58..dea643f107 100644 --- a/keyboards/whitefox/board_IS31FL3731C.h +++ b/keyboards/whitefox/board_IS31FL3731C.h @@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = { 400000 // clock speed (Hz); 400kHz max for IS31 }; -#define GDISP_SCREEN_WIDTH 16 -#define GDISP_SCREEN_HEIGHT 5 - static const uint8_t led_mask[] = { 0xFF, 0x00, /* C1-1 -> C1-16 */ 0xFF, 0x00, /* C2-1 -> C2-16 */ diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h index 76040bd744..dc33a7ce5b 100644 --- a/keyboards/whitefox/config.h +++ b/keyboards/whitefox/config.h @@ -81,10 +81,4 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -#endif - -// The visualizer needs gfx thread priorities -#define LED_DISPLAY_NUMBER 0 - -#define LED_NUM_ROWS 5 -#define LED_NUM_COLS 16 \ No newline at end of file +#endif \ No newline at end of file diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h index eb93f92ebb..ca338399d3 100644 --- a/keyboards/whitefox/gfxconf.h +++ b/keyboards/whitefox/gfxconf.h @@ -22,10 +22,6 @@ #ifndef _GFXCONF_H #define _GFXCONF_H -#ifndef EMULATOR -#define GDISP_DRIVER_LIST GDISPVMT_IS31FL3731C_QMK -#endif - #include "common_gfxconf.h" #endif /* _GFXCONF_H */ diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index 3911480718..32273e08aa 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -69,4 +69,6 @@ CUSTOM_MATRIX = yes # Custom matrix file BACKLIGHT_ENABLE = yes VISUALIZER_ENABLE = yes -include $(TOP_DIR)/drivers/ugfx/gdisp/is31fl3731c/driver.mk +LED_DRIVER = is31fl3731c +LED_WIDTH = 16 +LED_HEIGHT = 5 \ No newline at end of file diff --git a/quantum/visualizer/lcd_keyframes.c b/quantum/visualizer/lcd_keyframes.c index 82e4184d2c..75eb457001 100644 --- a/quantum/visualizer/lcd_keyframes.c +++ b/quantum/visualizer/lcd_keyframes.c @@ -166,8 +166,8 @@ bool lcd_keyframe_draw_logo(keyframe_animation_t* animation, visualizer_state_t* // or state structs, here we use the image //gdispGBlitArea is a tricky function to use since it supports blitting part of the image - // if you have full screen image, then just use 128 and 32 for both source and target dimensions - gdispGBlitArea(GDISP, 0, 0, 128, 32, 0, 0, 128, (pixel_t*)resource_lcd_logo); + // if you have full screen image, then just use LCD_WIDTH and LCD_HEIGHT for both source and target dimensions + gdispGBlitArea(GDISP, 0, 0, LCD_WIDTH, LCD_HEIGHT, 0, 0, LCD_WIDTH, (pixel_t*)resource_lcd_logo); return false; } diff --git a/quantum/visualizer/led_backlight_keyframes.c b/quantum/visualizer/led_backlight_keyframes.c index d2921a391a..eb3f5561d8 100644 --- a/quantum/visualizer/led_backlight_keyframes.c +++ b/quantum/visualizer/led_backlight_keyframes.c @@ -41,8 +41,8 @@ static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint } // TODO: Should be customizable per keyboard -#define NUM_ROWS LED_NUM_ROWS -#define NUM_COLS LED_NUM_COLS +#define NUM_ROWS LED_HEIGHT +#define NUM_COLS LED_WIDTH static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS]; static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS]; diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk index 3a0f771bca..102d23b7ef 100644 --- a/quantum/visualizer/visualizer.mk +++ b/quantum/visualizer/visualizer.mk @@ -20,6 +20,30 @@ # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. +define ADD_DRIVER + $(1)_DRIVER:=$(strip $($(1)_DRIVER)) + $(1)_WIDTH:=$(strip $($(1)_WIDTH)) + $(1)_HEIGHT:=$(strip $($(1)_HEIGHT)) + ifeq ($($(1)_DRIVER),) + $$(error $(1)_DRIVER is not defined) + endif + ifeq ($($(1)_WIDTH),) + $$(error $(1)_WIDTH is not defined) + endif + ifeq ($($(1)_HEIGHT),) + $$(error $(1)_HEIGHT is not defined) + endif + OPT_DEFS+=-D$(1)_WIDTH=$($(1)_WIDTH) + OPT_DEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT) + GFXDEFS+=-D$(1)_WIDTH=$($(1)_WIDTH) + GFXDEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT) + $(1)_DISPLAY_NUMBER:=$$(words $$(GDISP_DRIVER_LIST)) + OPT_DEFS+=-D$(1)_DISPLAY_NUMBER=$$($(1)_DISPLAY_NUMBER) + include $(TOP_DIR)/drivers/ugfx/gdisp/$($(1)_DRIVER)/driver.mk +endef + +GDISP_DRIVER_LIST:= + SRC += $(VISUALIZER_DIR)/visualizer.c \ $(VISUALIZER_DIR)/visualizer_keyframes.c EXTRAINCDIRS += $(GFXINC) $(VISUALIZER_DIR) @@ -40,10 +64,12 @@ SRC += $(VISUALIZER_DIR)/lcd_backlight_keyframes.c # Note, that the linker will strip out any resources that are not actually in use SRC += $(VISUALIZER_DIR)/resources/lcd_logo.c OPT_DEFS += -DLCD_BACKLIGHT_ENABLE +$(eval $(call ADD_DRIVER,LCD)) endif ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) SRC += $(VISUALIZER_DIR)/led_backlight_keyframes.c +$(eval $(call ADD_DRIVER,LED)) endif SRC += $(VISUALIZER_DIR)/default_animations.c @@ -55,6 +81,15 @@ GFXINC += quantum/visualizer GFXSRC := $(patsubst $(TOP_DIR)/%,%,$(GFXSRC)) GFXDEFS := $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS))) +GDISP_LIST_COMMA=, +GDISP_LIST_EMPTY= +GDISP_LIST_SPACE=$(GDISP_LIST_EMPTY) $(GDISP_LIST_EMPTY) + +GDISP_DRIVER_LIST := $(strip $(GDISP_DRIVER_LIST)) +GDISP_DRIVER_LIST := $(subst $(GDISP_LIST_SPACE),$(GDISP_LIST_COMMA),$(GDISP_DRIVER_LIST)) + +GFXDEFS +=-DGDISP_DRIVER_LIST="$(GDISP_DRIVER_LIST)" + ifneq ("$(wildcard $(KEYMAP_PATH)/visualizer.c)","") SRC += keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/visualizer.c else -- cgit v1.2.3 From 190b90892bf1b17f5cb24a1e7bd88c63047c3eb0 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Mon, 10 Jul 2017 10:48:02 +0300 Subject: Rename board files to lowercase --- drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c | 2 +- drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c | 2 +- keyboards/ergodox/infinity/board_IS31FL3731C.h | 110 -------------------- keyboards/ergodox/infinity/board_ST7565.h | 113 --------------------- keyboards/ergodox/infinity/board_is31fl3731c.h | 110 ++++++++++++++++++++ keyboards/ergodox/infinity/board_st7565.h | 113 +++++++++++++++++++++ keyboards/whitefox/board_IS31FL3731C.h | 106 ------------------- keyboards/whitefox/board_is31fl3731c.h | 106 +++++++++++++++++++ 8 files changed, 331 insertions(+), 331 deletions(-) delete mode 100644 keyboards/ergodox/infinity/board_IS31FL3731C.h delete mode 100644 keyboards/ergodox/infinity/board_ST7565.h create mode 100644 keyboards/ergodox/infinity/board_is31fl3731c.h create mode 100644 keyboards/ergodox/infinity/board_st7565.h delete mode 100644 keyboards/whitefox/board_IS31FL3731C.h create mode 100644 keyboards/whitefox/board_is31fl3731c.h diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c index 3faddcda8b..917adadb84 100644 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c +++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c @@ -26,7 +26,7 @@ along with this program. If not, see . #include "gdisp_lld_config.h" #include "src/gdisp/gdisp_driver.h" -#include "board_IS31FL3731C.h" +#include "board_is31fl3731c.h" // Can't include led_tables from here diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c index 4a4c83e891..c38194b069 100644 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c +++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c @@ -13,7 +13,7 @@ #include "gdisp_lld_config.h" #include "src/gdisp/gdisp_driver.h" -#include "board_ST7565.h" +#include "board_st7565.h" /*===========================================================================*/ /* Driver local definitions. */ diff --git a/keyboards/ergodox/infinity/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_IS31FL3731C.h deleted file mode 100644 index f248cc25ba..0000000000 --- a/keyboards/ergodox/infinity/board_IS31FL3731C.h +++ /dev/null @@ -1,110 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0x3F, 0x00, /* C5-1 -> C5-16 */ - 0x00, 0x00, /* C6-1 -> C6-16 */ - 0x00, 0x00, /* C7-1 -> C7-16 */ - 0x00, 0x00, /* C8-1 -> C8-16 */ - 0x00, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16 ) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { -// 45 44 43 42 41 40 39 - { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, -// 52 51 50 49 48 47 46 - { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, -// 58 57 56 55 54 53 N/A - { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, -// 67 66 65 64 63 62 61 - { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, -// 76 75 74 73 72 60 59 - { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, -// N/A N/A N/A N/A N/A N/A 68 - { NA, NA, NA, NA, NA, NA, LA(5, 4) }, -// N/A N/A N/A N/A 71 70 69 - { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, -}; - - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void) g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) -{ - (void) g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void) g; - if(!shutdown) { - palSetPad(GPIOB, 16); - } - else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/board_ST7565.h b/keyboards/ergodox/infinity/board_ST7565.h deleted file mode 100644 index 9ab636c95d..0000000000 --- a/keyboards/ergodox/infinity/board_ST7565.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 -#define ST7565_ADC ST7565_ADC_NORMAL -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0,1,2,3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_GPIOPORT GPIOC -#define ST7565_PORT PORTC -#define ST7565_A0_PIN 7 -#define ST7565_RST_PIN 8 -#define ST7565_MOSI_PIN 6 -#define ST7565_SLCK_PIN 5 -#define ST7565_SS_PIN 4 - -#define palSetPadModeRaw(portname, bits) \ - ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits - -#define palSetPadModeNamed(portname, portmode) \ - palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) - -#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - // Operation complete callback or @p NULL. - .end_cb = NULL, - //The chip select line port - when not using pcs. - .ssport = ST7565_GPIOPORT, - // brief The chip select line pad number - when not using pcs. - .sspad=ST7565_SS_PIN, - // SPI initialization data. - .tar0 = - SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes - | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns - | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns - | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns - | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 - | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns -}; - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); - spiSelect(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to release - //spiReleaseBus(&SPID1); - spiUnselect(&SPID1); -} - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); - palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - palSetPadModeRaw(MOSI, ST7565_SPI_MODE); - palSetPadModeRaw(SLCK, ST7565_SPI_MODE); - palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL); - - spiInit(); - spiStart(&SPID1, &spi1config); - release_bus(g); -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - if (state) { - palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } - else { - palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); - } -} - -static GFXINLINE void enter_data_mode(GDisplay *g) { - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); -} - -static GFXINLINE void enter_cmd_mode(GDisplay *g) { - palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); -} - - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/board_is31fl3731c.h b/keyboards/ergodox/infinity/board_is31fl3731c.h new file mode 100644 index 0000000000..f248cc25ba --- /dev/null +++ b/keyboards/ergodox/infinity/board_is31fl3731c.h @@ -0,0 +1,110 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0x3F, 0x00, /* C5-1 -> C5-16 */ + 0x00, 0x00, /* C6-1 -> C6-16 */ + 0x00, 0x00, /* C7-1 -> C7-16 */ + 0x00, 0x00, /* C8-1 -> C8-16 */ + 0x00, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 45 44 43 42 41 40 39 + { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, +// 52 51 50 49 48 47 46 + { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, +// 58 57 56 55 54 53 N/A + { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, +// 67 66 65 64 63 62 61 + { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, +// 76 75 74 73 72 60 59 + { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, +// N/A N/A N/A N/A N/A N/A 68 + { NA, NA, NA, NA, NA, NA, LA(5, 4) }, +// N/A N/A N/A N/A 71 70 69 + { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox/infinity/board_st7565.h b/keyboards/ergodox/infinity/board_st7565.h new file mode 100644 index 0000000000..9ab636c95d --- /dev/null +++ b/keyboards/ergodox/infinity/board_st7565.h @@ -0,0 +1,113 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 +#define ST7565_ADC ST7565_ADC_NORMAL +#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC +#define ST7565_PAGE_ORDER 0,1,2,3 +/* + * Custom page order for several LCD boards, e.g. HEM12864-99 + * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 + */ + +#define ST7565_GPIOPORT GPIOC +#define ST7565_PORT PORTC +#define ST7565_A0_PIN 7 +#define ST7565_RST_PIN 8 +#define ST7565_MOSI_PIN 6 +#define ST7565_SLCK_PIN 5 +#define ST7565_SS_PIN 4 + +#define palSetPadModeRaw(portname, bits) \ + ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits + +#define palSetPadModeNamed(portname, portmode) \ + palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) + +#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) +// DSPI Clock and Transfer Attributes +// Frame Size: 8 bits +// MSB First +// CLK Low by default +static const SPIConfig spi1config = { + // Operation complete callback or @p NULL. + .end_cb = NULL, + //The chip select line port - when not using pcs. + .ssport = ST7565_GPIOPORT, + // brief The chip select line pad number - when not using pcs. + .sspad=ST7565_SS_PIN, + // SPI initialization data. + .tar0 = + SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes + | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns + | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns + | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns + | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 + | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns +}; + +static GFXINLINE void acquire_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to acquire + // spiAcquireBus(&SPID1); + spiSelect(&SPID1); +} + +static GFXINLINE void release_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to release + //spiReleaseBus(&SPID1); + spiUnselect(&SPID1); +} + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); + palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + palSetPadModeRaw(MOSI, ST7565_SPI_MODE); + palSetPadModeRaw(SLCK, ST7565_SPI_MODE); + palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL); + + spiInit(); + spiStart(&SPID1, &spi1config); + release_bus(g); +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + if (state) { + palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } + else { + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } +} + +static GFXINLINE void enter_data_mode(GDisplay *g) { + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); +} + +static GFXINLINE void enter_cmd_mode(GDisplay *g) { + palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); +} + + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + spiSend(&SPID1, length, data); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/whitefox/board_IS31FL3731C.h b/keyboards/whitefox/board_IS31FL3731C.h deleted file mode 100644 index dea643f107..0000000000 --- a/keyboards/whitefox/board_IS31FL3731C.h +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0xFF, 0x00, /* C5-1 -> C5-16 */ - 0xFF, 0x00, /* C6-1 -> C6-16 */ - 0xFF, 0x00, /* C7-1 -> C7-16 */ - 0xFF, 0x00, /* C8-1 -> C8-16 */ - 0xFE, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16 ) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { -// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)}, -// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)}, -// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 - { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)}, -// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 - { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)}, -// 62 63 64 65 66 67 68 69 70 71 - { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)}, -}; - - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void) g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) -{ - (void) g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void) g; - if(!shutdown) { - palSetPad(GPIOB, 16); - } - else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/whitefox/board_is31fl3731c.h b/keyboards/whitefox/board_is31fl3731c.h new file mode 100644 index 0000000000..dea643f107 --- /dev/null +++ b/keyboards/whitefox/board_is31fl3731c.h @@ -0,0 +1,106 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0xFF, 0x00, /* C5-1 -> C5-16 */ + 0xFF, 0x00, /* C6-1 -> C6-16 */ + 0xFF, 0x00, /* C7-1 -> C7-16 */ + 0xFF, 0x00, /* C8-1 -> C8-16 */ + 0xFE, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)}, +// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)}, +// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 + { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)}, +// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 + { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)}, +// 62 63 64 65 66 67 68 69 70 71 + { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)}, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ -- cgit v1.2.3 From 551924f8a02b374201f7d0066755fa183a45accf Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Mon, 10 Jul 2017 10:49:50 +0300 Subject: Add template board files --- .../gdisp/is31fl3731c/board_is31fl3731c_template.h | 110 ++++++++++++++++++++ drivers/ugfx/gdisp/st7565/board_st7565_template.h | 113 +++++++++++++++++++++ 2 files changed, 223 insertions(+) create mode 100644 drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h create mode 100644 drivers/ugfx/gdisp/st7565/board_st7565_template.h diff --git a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h new file mode 100644 index 0000000000..f248cc25ba --- /dev/null +++ b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h @@ -0,0 +1,110 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0x3F, 0x00, /* C5-1 -> C5-16 */ + 0x00, 0x00, /* C6-1 -> C6-16 */ + 0x00, 0x00, /* C7-1 -> C7-16 */ + 0x00, 0x00, /* C8-1 -> C8-16 */ + 0x00, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 45 44 43 42 41 40 39 + { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, +// 52 51 50 49 48 47 46 + { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, +// 58 57 56 55 54 53 N/A + { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, +// 67 66 65 64 63 62 61 + { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, +// 76 75 74 73 72 60 59 + { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, +// N/A N/A N/A N/A N/A N/A 68 + { NA, NA, NA, NA, NA, NA, LA(5, 4) }, +// N/A N/A N/A N/A 71 70 69 + { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/ugfx/gdisp/st7565/board_st7565_template.h b/drivers/ugfx/gdisp/st7565/board_st7565_template.h new file mode 100644 index 0000000000..9ab636c95d --- /dev/null +++ b/drivers/ugfx/gdisp/st7565/board_st7565_template.h @@ -0,0 +1,113 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 +#define ST7565_ADC ST7565_ADC_NORMAL +#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC +#define ST7565_PAGE_ORDER 0,1,2,3 +/* + * Custom page order for several LCD boards, e.g. HEM12864-99 + * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 + */ + +#define ST7565_GPIOPORT GPIOC +#define ST7565_PORT PORTC +#define ST7565_A0_PIN 7 +#define ST7565_RST_PIN 8 +#define ST7565_MOSI_PIN 6 +#define ST7565_SLCK_PIN 5 +#define ST7565_SS_PIN 4 + +#define palSetPadModeRaw(portname, bits) \ + ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits + +#define palSetPadModeNamed(portname, portmode) \ + palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) + +#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) +// DSPI Clock and Transfer Attributes +// Frame Size: 8 bits +// MSB First +// CLK Low by default +static const SPIConfig spi1config = { + // Operation complete callback or @p NULL. + .end_cb = NULL, + //The chip select line port - when not using pcs. + .ssport = ST7565_GPIOPORT, + // brief The chip select line pad number - when not using pcs. + .sspad=ST7565_SS_PIN, + // SPI initialization data. + .tar0 = + SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes + | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns + | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns + | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns + | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 + | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns +}; + +static GFXINLINE void acquire_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to acquire + // spiAcquireBus(&SPID1); + spiSelect(&SPID1); +} + +static GFXINLINE void release_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to release + //spiReleaseBus(&SPID1); + spiUnselect(&SPID1); +} + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); + palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + palSetPadModeRaw(MOSI, ST7565_SPI_MODE); + palSetPadModeRaw(SLCK, ST7565_SPI_MODE); + palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL); + + spiInit(); + spiStart(&SPID1, &spi1config); + release_bus(g); +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + if (state) { + palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } + else { + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } +} + +static GFXINLINE void enter_data_mode(GDisplay *g) { + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); +} + +static GFXINLINE void enter_cmd_mode(GDisplay *g) { + palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); +} + + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + spiSend(&SPID1, length, data); +} + +#endif /* _GDISP_LLD_BOARD_H */ -- cgit v1.2.3 From 10546665f4cdc25e3405bfa108b066004d436aea Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sat, 8 Jul 2017 18:42:13 +0300 Subject: Fix uninitialized backlight_level in the Visualizer --- quantum/visualizer/visualizer.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/quantum/visualizer/visualizer.c b/quantum/visualizer/visualizer.c index 68b86f590c..5b4d8d603e 100644 --- a/quantum/visualizer/visualizer.c +++ b/quantum/visualizer/visualizer.c @@ -256,6 +256,9 @@ static DECLARE_THREAD_FUNCTION(visualizerThread, arg) { .mods = 0xFF, .leds = 0xFFFFFFFF, .suspended = false, + #ifdef BACKLIGHT_ENABLE + .backlight_level = 0, + #endif #ifdef VISUALIZER_USER_DATA_SIZE .user_data = {0}, #endif @@ -300,6 +303,7 @@ static DECLARE_THREAD_FUNCTION(visualizerThread, arg) { else { gdispGSetPowerMode(LED_DISPLAY, powerOff); } + state.status.backlight_level = current_status.backlight_level; } #endif if (visualizer_enabled) { -- cgit v1.2.3