summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-06-18Extensible split data sync (#11930)Nick Brassel
* Extensible split data sync capability through transactions. - Split common transport has been split up between the transport layer and data layer. - Split "transactions" model used, with convergence between I2C and serial data definitions. - Slave matrix "generation count" is used to determine if the full slave matrix needs to be retrieved. - Encoders get the same "generation count" treatment. - All other blocks of data are synchronised when a change is detected. - All transmissions have a globally-configurable deadline before a transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms). - Added atomicity for all core-synced data, preventing partial updates - Added retries to AVR i2c_master's i2c_start, to minimise the number of failed transactions when interrupts are disabled on the slave due to atomicity checks. - Some keyboards have had slight modifications made in order to ensure that they still build due to firmware size restrictions. * Fixup LED_MATRIX compile. * Parameterise ERROR_DISCONNECT_COUNT.
2021-06-17Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-06-17OLED driver tweaks (#13215)Ryan
2021-06-15Fix overrun in oled_write_raw when not at (0, 0) (#13204)Jonathan Rascher
2021-06-15Fix overrun in st7565_write_raw when not at (0, 0) (#13209)Jonathan Rascher
2021-06-10Add ST7565 LCD driver (#13089)Ryan
Co-authored-by: Joakim Tufvegren <jocke@barbanet.com>
2021-06-10GMMK Pro RGB Support (#13147)Gigahawk
* Enable SPI1 for GMMK pro * Setup initial boilerplate for new LED driver * RGB matrix minimally functional * Map full LED matrix * Return keymap to default * Fix printscreen LED mapping * Reduce max brightness * Default values for AW20216 * Add documentation for AW20216 * Disable console and warnings * Run cformat * Update drivers/awinic/aw20216.h Co-authored-by: Drashna Jaelre <drashna@live.com> * make aw struct match issi struct Co-authored-by: Drashna Jaelre <drashna@live.com> * add led location defines Co-authored-by: Drashna Jaelre <drashna@live.com> * Use led pin definitions in keyboard.c * Add driver indices to led map * Fix elif typo * Run cformat * Update docs * Fix typo in docs * Document global brightness limits Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-08`spi_master` Kinetis support (#13098)Ryan
2021-06-03Tidy up spi_master includes (#13053)Ryan
2021-06-03Fix up WS2812 SPI driver on F072. (#13022)Nick Brassel
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-10[CI] Format code according to conventions (#12838)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-05-08haptic: correct size of reserved field in the haptic structure. This saves 1 ↵Purdea Andrei
byte of wasted SRAM. (#12483) Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-04-19Fixup Satisfaction75 bootprocess. (#12621)Nick Brassel
- Use normal ChibiOS I2C driver. - Move drawing code to housekeeping -- previously it was during matrix scan, which gets executed during bootmagic checks. However, bootmagic is invoked before QWIIC subsystem is enabled, which means I2C isn't configured yet. All I2C calls to the OLED fail with timeouts while bootmagic is being checked. Housekeeping ensures this is executed once the system has initialised and settled. - QWIIC OLED driver: properly clear out OLED buffer when clearing screen.
2021-02-14Merge branch 'master' into developJoshua Diamond
2021-02-15LED Matrix: rename `LED_DRIVER_LED_COUNT` to `DRIVER_LED_TOTAL` (#11858)Ryan
2021-02-15Format code according to conventions (#11907)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-15Add support for analog USBPD on STM32G4xx. (#11824)Nick Brassel
* Add support for analog USBPD on STM32G4xx. * Split up to a list of driver types, allow for custom.
2021-02-15Format code according to conventions (#11905)github-actions[bot]
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-08Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-02-09ws2812: Fix number of nops for AVR at 8 MHz (#9559)Sergey Vlasov
* ws2812: Fix number of nops for AVR at 8 MHz When trying to calculate the number of nops for AVR running at 8 MHz, the value of `w3` is expected to be negative; however, because `F_CPU` is defined in tmk_core/avr.mk with the `UL` suffix, the preprocessor performs its calculations using `unsigned long`, getting a very large positive number instead of the expected negative number; this then results in generating code with a huge number of nops. Fix the broken calculations by performing a comparison before subtraction, so that the unsigned number wraparound does not occur. The keyboard which triggers the problem is `handwired/promethium`; the buggy code silently compiles, but the resulting timings would be completely wrong. * ws2812: Clean up the code after the 8 MHz fix Remove old code which was unsuccessfully trying to clamp negative w1, w2 and w3 values to 0, and set w1_nops, w2_nops and w3_nops directly.
2021-01-30Include stdbool.h in uart.h (#11728)Drashna Jaelre
2021-01-29Adds AT90USB162 support (#11570)Dasky
* at90usb162 support * fix missing bracket * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-27UART driver refactor (#11637)Ryan
2021-01-15Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-01-16Add BGR byte order for WS2812 drivers (#11562)kb-elmo
* add byte order bgr for ws2812 * update docs for driver change * Update ws2812_driver.md * Update docs/ws2812_driver.md Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-04Split up QWIIC_ENABLE to use QWIIC_DRIVERS as well, with yes/no for enable ↵Nick Brassel
flag. (#11426)
2021-01-03Merge remote-tracking branch 'upstream/master' into developNick Brassel
2021-01-03Align ChibiOS spi_master behaviour with AVR (#11404)Ryan
* Align ChibiOS spi_master behaviour with AVR * Rollback `spi_transmit()` and `spi_receive()` to preserve DMA
2020-12-30Rewrite APA102 support (#10894)Aldehir Rojas
* Rewrite APA102 support The APA102 source was broken by commit 16a15c1cfcbfd0feb2c2cf1383676747e2f97d73 as it did not include the quantum header. This commit addresses that, as well as other issues with transferring bytes over the SPI interface, i.e. it was not setting the clock pin back to low after sending a bit. The deviation when sending the end frame is kept, but updated to the latest from the referenced project. Finally, these changes expose the global LED brightness parameter of the APA102. Brightness values are configurable through `APA102_DEFAULT_BRIGHTNESS` and `APA102_MAX_BRIGHTNESS`. * Fix typo in led brightness extern * Move driver out of AVR directory and add delay for ARM * Experimental APA102 support on AVR and ARM Co-authored-by: Alde Rojas <hello@alde.io> * Refactor apa102_send_byte() calls to a loop * Implement io_wait function for ARM * Move APA102 drivers to own directory, fix copyright notice * Add APA102 keymap to handwired/onekey * Simplify RGBLIGHT_ENABLE/DRIVER option handling Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
2020-12-27Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-28Ensure single newline at EOF for core files (#11310)Ryan
2020-12-26Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-26Change include guards in tmk_core/ and drivers/ to pragma once (#11240)Ryan
2020-12-18Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-18Various compilation fixes for avr-gcc 10 (#9269)Joel Challis
2020-12-18Merge remote-tracking branch 'upstream/master' into developfauxpark
2020-12-17Run cformat and dos2unix manually (#11235)Ryan
2020-12-16Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-16Normalise include statements in keyboard code (#11185)Ryan
2020-12-13Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-14Add i2c 24LC64 eeprom (#11200)Xelus22
* add 24LC64 eeprom * docs update * Update docs/eeprom_driver.md Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-12-11Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-11Normalise include statements in core code (#11153)Ryan
* Normalise include statements in core code * Missed one
2020-12-06Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-06Update is31fl3731-simple (#7610)Xelus22
* update simple * Update is31fl3731-simple.c
2020-12-06Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-06add definition WS2812_BYTE_ORDER to fix RGB LED issues (#10184)Josh Hinnebusch
* add define for WS2812B-2020 to fix RGB issues * update driver doc * add WS2812_BYTE_ORDER definition to correct RGB byte issues * add definition variable thing * update per PR request * update per PR reqs * update per PR request * inital changes * move defines to color.h and add rgbw incase * Update docs/ws2812_driver.md Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: hineybush <hineybushkeyboards@gmail.com> Co-authored-by: Xelus22 <preyas22@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-12-06Merge remote-tracking branch 'origin/master' into developQMK Bot
2020-12-06Added OLED Initialized checks (#11129)XScorpion2