diff options
Diffstat (limited to 'keyboards/ep')
21 files changed, 1545 insertions, 0 deletions
diff --git a/keyboards/ep/comsn/hs68/config.h b/keyboards/ep/comsn/hs68/config.h new file mode 100644 index 0000000000..db633a2509 --- /dev/null +++ b/keyboards/ep/comsn/hs68/config.h @@ -0,0 +1,59 @@ +/* +Copyright 2019 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6868 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Elliot Powell +#define PRODUCT ephs68 +#define DESCRIPTION A Hotswapable keyboard for kayak + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS \ + { B6, B5, B4, D0, F6 } +#define MATRIX_COL_PINS \ + { B0, B1, B3, B2, B7, D3, F1, D5, D6, D7, F4, F5, C7, C6, F0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/ep/comsn/hs68/hs68.c b/keyboards/ep/comsn/hs68/hs68.c new file mode 100644 index 0000000000..fdde3ad78d --- /dev/null +++ b/keyboards/ep/comsn/hs68/hs68.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "hs68.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/ep/comsn/hs68/hs68.h b/keyboards/ep/comsn/hs68/hs68.h new file mode 100644 index 0000000000..394208c55c --- /dev/null +++ b/keyboards/ep/comsn/hs68/hs68.h @@ -0,0 +1,42 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define xxx KC_NO + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, xxx, K1E}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E}, \ + { K40, K41, K42, xxx, xxx, xxx, K46, xxx, xxx, xxx, K4A, K4B, K4C, K4D, K4E } \ + } diff --git a/keyboards/ep/comsn/hs68/info.json b/keyboards/ep/comsn/hs68/info.json new file mode 100644 index 0000000000..957684bc5b --- /dev/null +++ b/keyboards/ep/comsn/hs68/info.json @@ -0,0 +1,364 @@ +{ + "keyboard_name": "EPHS68", + "maintainer": "Elliot Powell (u/e11i0t23)", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "ESC", + "x": 0, + "y": 0 + }, + { + "label": "!", + "x": 1, + "y": 0 + }, + { + "label": "\"", + "x": 2, + "y": 0 + }, + { + "label": "\u00a3", + "x": 3, + "y": 0 + }, + { + "label": "$", + "x": 4, + "y": 0 + }, + { + "label": "%", + "x": 5, + "y": 0 + }, + { + "label": "^", + "x": 6, + "y": 0 + }, + { + "label": "&", + "x": 7, + "y": 0 + }, + { + "label": "*", + "x": 8, + "y": 0 + }, + { + "label": "(", + "x": 9, + "y": 0 + }, + { + "label": ")", + "x": 10, + "y": 0 + }, + { + "label": "_", + "x": 11, + "y": 0 + }, + { + "label": "+", + "x": 12, + "y": 0 + }, + { + "label": "Backspace", + "x": 13, + "y": 0, + "w": 2 + }, + { + "label": "GRAV", + "x": 15, + "y": 0 + }, + { + "label": "Tab", + "x": 0, + "y": 1, + "w": 1.5 + }, + { + "label": "Q", + "x": 1.5, + "y": 1 + }, + { + "label": "W", + "x": 2.5, + "y": 1 + }, + { + "label": "E", + "x": 3.5, + "y": 1 + }, + { + "label": "R", + "x": 4.5, + "y": 1 + }, + { + "label": "T", + "x": 5.5, + "y": 1 + }, + { + "label": "Y", + "x": 6.5, + "y": 1 + }, + { + "label": "U", + "x": 7.5, + "y": 1 + }, + { + "label": "I", + "x": 8.5, + "y": 1 + }, + { + "label": "O", + "x": 9.5, + "y": 1 + }, + { + "label": "P", + "x": 10.5, + "y": 1 + }, + { + "label": "{", + "x": 11.5, + "y": 1 + }, + { + "label": "}", + "x": 12.5, + "y": 1 + }, + { + "label": "DEL", + "x": 15, + "y": 1 + }, + { + "label": "Caps Lock", + "x": 0, + "y": 2, + "w": 1.75 + }, + { + "label": "A", + "x": 1.75, + "y": 2 + }, + { + "label": "S", + "x": 2.75, + "y": 2 + }, + { + "label": "D", + "x": 3.75, + "y": 2 + }, + { + "label": "F", + "x": 4.75, + "y": 2 + }, + { + "label": "G", + "x": 5.75, + "y": 2 + }, + { + "label": "H", + "x": 6.75, + "y": 2 + }, + { + "label": "J", + "x": 7.75, + "y": 2 + }, + { + "label": "K", + "x": 8.75, + "y": 2 + }, + { + "label": "L", + "x": 9.75, + "y": 2 + }, + { + "label": ":", + "x": 10.75, + "y": 2 + }, + { + "label": "@", + "x": 11.75, + "y": 2 + }, + { + "label": "~", + "x": 12.75, + "y": 2 + }, + { + "label": "Enter", + "x": 13.75, + "y": 1, + "w": 1.25, + "h": 2 + }, + { + "label": "PGUP", + "x": 15, + "y": 2 + }, + { + "label": "Shift", + "x": 0, + "y": 3, + "w": 1.25 + }, + { + "label": "|", + "x": 1.25, + "y": 3 + }, + { + "label": "Z", + "x": 2.25, + "y": 3 + }, + { + "label": "X", + "x": 3.25, + "y": 3 + }, + { + "label": "C", + "x": 4.25, + "y": 3 + }, + { + "label": "V", + "x": 5.25, + "y": 3 + }, + { + "label": "B", + "x": 6.25, + "y": 3 + }, + { + "label": "N", + "x": 7.25, + "y": 3 + }, + { + "label": "M", + "x": 8.25, + "y": 3 + }, + { + "label": "<", + "x": 9.25, + "y": 3 + }, + { + "label": ">", + "x": 10.25, + "y": 3 + }, + { + "label": "?", + "x": 11.25, + "y": 3 + }, + { + "label": "Shift", + "x": 12.25, + "y": 3, + "w": 1.75 + }, + { + "label": "UP", + "x": 14, + "y": 3 + }, + { + "label": "PGDN", + "x": 15, + "y": 3 + }, + { + "label": "Ctrl", + "x": 0, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 1.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Alt", + "x": 2.5, + "y": 4, + "w": 1.25 + }, + { + "x": 3.75, + "y": 4, + "w": 6.25 + }, + { + "label": "AltGr", + "x": 10, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 11.25, + "y": 4, + "w": 1.25 + }, + { + "label": "LEFT", + "x": 13, + "y": 4 + }, + { + "label": "DOWN", + "x": 14, + "y": 4 + }, + { + "label": "RIGHT", + "x": 15, + "y": 4 + } + ] + } + } +} diff --git a/keyboards/ep/comsn/hs68/keymaps/default/keymap.c b/keyboards/ep/comsn/hs68/keymaps/default/keymap.c new file mode 100644 index 0000000000..b2972da6da --- /dev/null +++ b/keyboards/ep/comsn/hs68/keymaps/default/keymap.c @@ -0,0 +1,27 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_END, + KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_LEFT, KC_DOWN, KC_RIGHT + ), +}; diff --git a/keyboards/ep/comsn/hs68/readme.md b/keyboards/ep/comsn/hs68/readme.md new file mode 100644 index 0000000000..0f230208f0 --- /dev/null +++ b/keyboards/ep/comsn/hs68/readme.md @@ -0,0 +1,13 @@ +# hs68 + +Hotswap 68% deisnged for the Kayak + +Keyboard Maintainer: [e11i0t23](https://github.com/e11i0t23) +Hardware Supported: ephs68 pcb. Kayak case kits +Hardware Availability: None + +Make example for this keyboard (after setting up your build environment): + + make ep/comsn/hs68:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk new file mode 100644 index 0000000000..b7d3b9b528 --- /dev/null +++ b/keyboards/ep/comsn/hs68/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/ep/comsn/mollydooker/config.h b/keyboards/ep/comsn/mollydooker/config.h new file mode 100644 index 0000000000..3ba661525a --- /dev/null +++ b/keyboards/ep/comsn/mollydooker/config.h @@ -0,0 +1,214 @@ +/* +Copyright 2019 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x9696 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Elliot Powell +#define PRODUCT mollydooker +#define DESCRIPTION Custom southpaw replacement PCB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 19 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS \ + { F4, F5, F6, F7, D2 } +#define MATRIX_COL_PINS \ + { B1, B2, B3, E6, B7, F1, F0, D0, D1, D7, D5, D4, D6, B4, B5, D3, B6, C6, C7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE +#define RGB_DI_PIN B0 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 84 +#define RGBLIGHT_LIMIT_VAL 35 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ diff --git a/keyboards/ep/comsn/mollydooker/info.json b/keyboards/ep/comsn/mollydooker/info.json new file mode 100644 index 0000000000..6ede5c1d8a --- /dev/null +++ b/keyboards/ep/comsn/mollydooker/info.json @@ -0,0 +1,96 @@ +{ + "keyboard_name": "mollydooker", + "maintainer": "Elliot Powell (u/e11i0t23)", + "width": 20, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "VolDn", "x": 0, "y": 0 }, + { "label": "VolUp", "x": 1, "y": 0 }, + { "label": "Mute", "x": 2, "y": 0 }, + { "label": "~", "x": 3, "y": 0 }, + { "label": "Esc", "x": 4, "y": 0 }, + { "label": "!", "x": 5, "y": 0 }, + { "label": "@", "x": 6, "y": 0 }, + { "label": "#", "x": 7, "y": 0 }, + { "label": "$", "x": 8, "y": 0 }, + { "label": "%", "x": 9, "y": 0 }, + { "label": "^", "x": 10, "y": 0 }, + { "label": "&", "x": 11, "y": 0 }, + { "label": "*", "x": 12, "y": 0 }, + { "label": "(", "x": 13, "y": 0 }, + { "label": ")", "x": 14, "y": 0 }, + { "label": "_", "x": 15, "y": 0 }, + { "label": "+", "x": 16, "y": 0 }, + { "label": "Backspace", "x": 17, "y": 0, "w": 2 }, + { "label": "Del", "x": 19, "y": 0 }, + { "label": "7", "x": 0, "y": 1 }, + { "label": "8", "x": 1, "y": 1 }, + { "label": "9", "x": 2, "y": 1 }, + { "label": "+", "x": 3, "y": 1, "h": 2 }, + { "label": "Tab", "x": 4, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 5.5, "y": 1 }, + { "label": "W", "x": 6.5, "y": 1 }, + { "label": "E", "x": 7.5, "y": 1 }, + { "label": "R", "x": 8.5, "y": 1 }, + { "label": "T", "x": 9.5, "y": 1 }, + { "label": "Y", "x": 10.5, "y": 1 }, + { "label": "U", "x": 11.5, "y": 1 }, + { "label": "I", "x": 12.5, "y": 1 }, + { "label": "O", "x": 13.5, "y": 1 }, + { "label": "P", "x": 14.5, "y": 1 }, + { "label": "{", "x": 15.5, "y": 1 }, + { "label": "}", "x": 16.5, "y": 1 }, + { "label": "|", "x": 17.5, "y": 1, "w": 1.5 }, + { "label": "PgUp", "x": 19, "y": 1 }, + { "label": "4", "x": 0, "y": 2 }, + { "label": "5", "x": 1, "y": 2 }, + { "label": "6", "x": 2, "y": 2 }, + { "label": "Caps Lock", "x": 4, "y": 2, "w": 1.75 }, + { "label": "A", "x": 5.75, "y": 2 }, + { "label": "S", "x": 6.75, "y": 2 }, + { "label": "D", "x": 7.75, "y": 2 }, + { "label": "F", "x": 8.75, "y": 2 }, + { "label": "G", "x": 9.75, "y": 2 }, + { "label": "H", "x": 10.75, "y": 2 }, + { "label": "J", "x": 11.75, "y": 2 }, + { "label": "K", "x": 12.75, "y": 2 }, + { "label": "L", "x": 13.75, "y": 2 }, + { "label": ":", "x": 14.75, "y": 2 }, + { "label": "\"", "x": 15.75, "y": 2 }, + { "label": "Enter", "x": 16.75, "y": 2, "w": 2.25 }, + { "label": "PgDn", "x": 19, "y": 2 }, + { "label": "1", "x": 0, "y": 3 }, + { "label": "2", "x": 1, "y": 3 }, + { "label": "3", "x": 2, "y": 3 }, + { "label": "Enter", "x": 3, "y": 3, "h": 2 }, + { "label": "Shift", "x": 4, "y": 3, "w": 2.25 }, + { "label": "Z", "x": 6.25, "y": 3 }, + { "label": "X", "x": 7.25, "y": 3 }, + { "label": "C", "x": 8.25, "y": 3 }, + { "label": "V", "x": 9.25, "y": 3 }, + { "label": "B", "x": 10.25, "y": 3 }, + { "label": "N", "x": 11.25, "y": 3 }, + { "label": "M", "x": 12.25, "y": 3 }, + { "label": "<", "x": 13.25, "y": 3 }, + { "label": ">", "x": 14.25, "y": 3 }, + { "label": "?", "x": 15.25, "y": 3 }, + { "label": "Shift", "x": 16.25, "y": 3, "w": 1.75 }, + { "label": "Up", "x": 18, "y": 3 }, + { "label": "fn0", "x": 19, "y": 3 }, + { "label": "0", "x": 0, "y": 4, "w": 2 }, + { "label": ".", "x": 2, "y": 4 }, + { "label": "Ctrl", "x": 4, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 5.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 6.5, "y": 4, "w": 1.25 }, + { "label": "Space", "x": 7.75, "y": 4, "w": 6.25 }, + { "label": "Alt", "x": 14, "y": 4, "w": 1.5 }, + { "label": "Ctrl", "x": 15.5, "y": 4, "w": 1.5 }, + { "label": "Left", "x": 17, "y": 4 }, + { "label": "Down", "x": 18, "y": 4 }, + { "label": "Right", "x": 19, "y": 4 } + ] + } + } +} diff --git a/keyboards/ep/comsn/mollydooker/keymaps/default/keymap.c b/keyboards/ep/comsn/mollydooker/keymaps/default/keymap.c new file mode 100644 index 0000000000..a213973cdb --- /dev/null +++ b/keyboards/ep/comsn/mollydooker/keymaps/default/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + KC_NLCK, KC_PSLS, KC_PMNS, RGB_MOD, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_P4, KC_P5, KC_P6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_P1, KC_P2, KC_P3, KC_PENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_F5, + KC_P0, KC_PDOT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), +}; + +int RGB_current_mode; + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + enum rgb_matrix_effects { + RGB_MATRIX_SOLID_COLOR = 1, + #ifdef RGB_MATRIX_KEYPRESSES + RGB_MATRIX_SOLID_REACTIVE, + #endif + RGB_MATRIX_EFFECT_MAX + }; + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/ep/comsn/mollydooker/mollydooker.c b/keyboards/ep/comsn/mollydooker/mollydooker.c new file mode 100644 index 0000000000..d0d6f302ee --- /dev/null +++ b/keyboards/ep/comsn/mollydooker/mollydooker.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "mollydooker.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/ep/comsn/mollydooker/mollydooker.h b/keyboards/ep/comsn/mollydooker/mollydooker.h new file mode 100644 index 0000000000..0cdac37a02 --- /dev/null +++ b/keyboards/ep/comsn/mollydooker/mollydooker.h @@ -0,0 +1,41 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define xxxx KC_NO + +#define LAYOUT( \ + K100, K101, K102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117, k118, \ + K200, k201, K202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, k217, k218, \ + K300, k301, K302, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k315, k317, k318, \ + K400, K401, K402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, k414, k416, k417, k418, \ + K500, K502, k504, k505, k506, k509, k513, k514, k516, k517, k518) \ +{ \ + {K100, K101, K102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, k117, k118}, \ + {K200, k201, K202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, k217, k218}, \ + {K300, k301, K302, xxxx, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k315, xxxx, k317, k318}, \ + {K400, K401, K402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, k414, xxxx, k416, k417, k418}, \ + {K500, xxxx, K502, xxxx, k504, k505, k506, xxxx, xxxx, k509, xxxx, xxxx, xxxx, k513, k514, xxxx, k516, k517, k518} \ +} diff --git a/keyboards/ep/comsn/mollydooker/readme.md b/keyboards/ep/comsn/mollydooker/readme.md new file mode 100644 index 0000000000..c43875fdde --- /dev/null +++ b/keyboards/ep/comsn/mollydooker/readme.md @@ -0,0 +1,13 @@ +# mollydooker + +A southpaw extended 65 replacement PCB with per key RGB + +Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23](https://reddit.com/u/e11i0t23) +Hardware Supported: mollydooker +Hardware Availability: None + +Make example for this keyboard (after setting up your build environment): + + make ep/comsn/mollydooker:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk new file mode 100644 index 0000000000..db4f2edc0b --- /dev/null +++ b/keyboards/ep/comsn/mollydooker/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/ep/comsn/tf_longeboye/config.h b/keyboards/ep/comsn/tf_longeboye/config.h new file mode 100644 index 0000000000..e622010dbe --- /dev/null +++ b/keyboards/ep/comsn/tf_longeboye/config.h @@ -0,0 +1,64 @@ +/* +Copyright 2019 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x9696 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Elliot Powell +#define PRODUCT TF Longeboye +#define DESCRIPTION TF Longeboye Designed for Papi SodaMan of MKUK + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 18 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS \ + { B5, B4, D1, D2, D3 } +#define MATRIX_COL_PINS \ + { F4, F5, F6, F7, B1, B3, B2, B6, F0, F1, C7, D5, B7, E6, D7, C6, D4, D0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/ep/comsn/tf_longeboye/info.json b/keyboards/ep/comsn/tf_longeboye/info.json new file mode 100644 index 0000000000..5cfa993d30 --- /dev/null +++ b/keyboards/ep/comsn/tf_longeboye/info.json @@ -0,0 +1,99 @@ +{ + "keyboard_name": "tf_longeboye", + "maintainer": "Elliot Powell (u/e11i0t23)", + "width": 21.5, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "!", "x": 1, "y": 0 }, + { "label": "\"", "x": 2, "y": 0 }, + { "label": "\u00a3", "x": 3, "y": 0 }, + { "label": "$", "x": 4, "y": 0 }, + { "label": "%", "x": 5, "y": 0 }, + { "label": "^", "x": 6, "y": 0 }, + { "label": "&", "x": 7, "y": 0 }, + { "label": "*", "x": 8, "y": 0 }, + { "label": "(", "x": 9, "y": 0 }, + { "label": ")", "x": 10, "y": 0 }, + { "label": "_", "x": 11, "y": 0 }, + { "label": "+", "x": 12, "y": 0 }, + { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, + { "label": "Insert", "x": 15.25, "y": 0 }, + { "label": "PgUp", "x": 16.25, "y": 0 }, + { "label": "Num Lock", "x": 17.5, "y": 0 }, + { "label": "/", "x": 18.5, "y": 0 }, + { "label": "*", "x": 19.5, "y": 0 }, + { "label": "-", "x": 20.5, "y": 0 }, + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "{", "x": 11.5, "y": 1 }, + { "label": "}", "x": 12.5, "y": 1 }, + { "label": "Delete", "x": 15.25, "y": 1 }, + { "label": "PgDn", "x": 16.25, "y": 1 }, + { "label": "7", "x": 17.5, "y": 1 }, + { "label": "8", "x": 18.5, "y": 1 }, + { "label": "9", "x": 19.5, "y": 1 }, + { "label": "+", "x": 20.5, "y": 1, "h": 2 }, + { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ":", "x": 10.75, "y": 2 }, + { "label": "@", "x": 11.75, "y": 2 }, + { "label": "~", "x": 12.75, "y": 2 }, + { "label": "Enter", "x": 13.75, "y": 1, "w": 1.25, "h": 2 }, + { "label": "4", "x": 17.5, "y": 2 }, + { "label": "5", "x": 18.5, "y": 2 }, + { "label": "6", "x": 19.5, "y": 2 }, + { "label": "Shift", "x": 0, "y": 3, "w": 1.25 }, + { "label": "|", "x": 1.25, "y": 3 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": "<", "x": 9.25, "y": 3 }, + { "label": ">", "x": 10.25, "y": 3 }, + { "label": "?", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "fn", "x": 14, "y": 3 }, + { "label": "\u2191", "x": 15.25, "y": 3 }, + { "label": "1", "x": 17.5, "y": 3 }, + { "label": "2", "x": 18.5, "y": 3 }, + { "label": "3", "x": 19.5, "y": 3 }, + { "label": "Enter", "x": 20.5, "y": 3, "h": 2 }, + { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "Alt Gr", "x": 10, "y": 4, "w": 1.25 }, + { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "Ctrl", "x": 12.5, "y": 4, "w": 1.25 }, + { "label": "\u2190", "x": 14.25, "y": 4 }, + { "label": "\u2193", "x": 15.25, "y": 4 }, + { "label": "\u2192", "x": 16.25, "y": 4 }, + { "label": "0", "x": 17.5, "y": 4, "w": 2 }, + { "label": ".", "x": 19.5, "y": 4 } + ] + } + } +} diff --git a/keyboards/ep/comsn/tf_longeboye/keymaps/default/keymap.c b/keyboards/ep/comsn/tf_longeboye/keymaps/default/keymap.c new file mode 100644 index 0000000000..2e9da9b04a --- /dev/null +++ b/keyboards/ep/comsn/tf_longeboye/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + [1] = LAYOUT( /* Base */ + + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, SGUI(KC_S), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS +), + +}; + + diff --git a/keyboards/ep/comsn/tf_longeboye/readme.md b/keyboards/ep/comsn/tf_longeboye/readme.md new file mode 100644 index 0000000000..3bd89fbec0 --- /dev/null +++ b/keyboards/ep/comsn/tf_longeboye/readme.md @@ -0,0 +1,11 @@ +# TF Longeboye + +Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23](https://reddit.com/u/e11i0t23) +Hardware Supported: TF Longeboye +Hardware Availability: None + +Make example for this keyboard (after setting up your build environment): + + make ep/comsn/tf_longeboye:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk new file mode 100644 index 0000000000..195c9e5023 --- /dev/null +++ b/keyboards/ep/comsn/tf_longeboye/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/ep/comsn/tf_longeboye/tf__longeboye.c b/keyboards/ep/comsn/tf_longeboye/tf__longeboye.c new file mode 100644 index 0000000000..9e8141772c --- /dev/null +++ b/keyboards/ep/comsn/tf_longeboye/tf__longeboye.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "tf_longeboye.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/ep/comsn/tf_longeboye/tf_longeboye.h b/keyboards/ep/comsn/tf_longeboye/tf_longeboye.h new file mode 100644 index 0000000000..f673ff66d7 --- /dev/null +++ b/keyboards/ep/comsn/tf_longeboye/tf_longeboye.h @@ -0,0 +1,40 @@ +/* Copyright 2019 Elliot Powell + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K013, K014, K015, K016, K018, K019, K408, K114, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K113, K115, K116, K118, K119, K407, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, K218, K219, K405, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K318, K319, K404, K316, \ + K400, K401, K402, K406, K410, K411, K413, K414, K415, K416, K418, K403 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K013, K014, K015, K016, K018, K019, }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K113, K114, K115, K116, K118, K119, }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, KC_NO, K216, K218, K219, }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, K316, K318, K319, }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, KC_NO, K410, K411, K413, K414, K415, K416, K418, KC_NO, } \ +} |