diff options
Diffstat (limited to 'drivers')
27 files changed, 4352 insertions, 70 deletions
diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index 2fdd9f65e1..385bd97cb8 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -15,21 +15,24 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/* This library follows the convention of the AVR i2c_master library. +/* This library is only valid for STM32 processors. + * This library follows the convention of the AVR i2c_master library. * As a result addresses are expected to be already shifted (addr << 1). * I2CD1 is the default driver which corresponds to pins B6 and B7. This * can be changed. * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that - * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. + * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used + * but using any other I2C pins should be trivial. */ #include "i2c_master.h" +#include "quantum.h" #include <string.h> #include <hal.h> static uint8_t i2c_address; -// This configures the I2C clock to 400Mhz assuming a 72Mhz clock +// This configures the I2C clock to 400khz assuming a 72Mhz clock // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html static const I2CConfig i2cconfig = { STM32_TIMINGR_PRESC(15U) | @@ -39,13 +42,17 @@ static const I2CConfig i2cconfig = { 0 }; +__attribute__ ((weak)) void i2c_init(void) { - palSetGroupMode(GPIOB,6,7, PAL_MODE_INPUT); // Try releasing special pins for a short time - chThdSleepMilliseconds(10); + // Try releasing special pins for a short time + palSetPadMode(GPIOB, 6, PAL_MODE_INPUT); + palSetPadMode(GPIOB, 7, PAL_MODE_INPUT); - palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); - palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); + chThdSleepMilliseconds(10); + + palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); + palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); //i2cInit(); //This is invoked by halInit() so no need to redo it. } @@ -82,12 +89,12 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l { complete_packet[i+1] = data[i]; } - complete_packet[0] = regaddr + complete_packet[0] = regaddr; return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); } -uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) +uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); @@ -97,7 +104,6 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t le // This is usually not needed. It releases the driver to allow pins to become GPIO again. uint8_t i2c_stop(uint16_t timeout) { - i2c_address = address; i2cStop(&I2C_DRIVER); return 0; } diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h index 9d51245be1..392760328f 100644 --- a/drivers/arm/i2c_master.h +++ b/drivers/arm/i2c_master.h @@ -34,6 +34,7 @@ void i2c_init(void); uint8_t i2c_start(uint8_t address); uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); +uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length); uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); -void i2c_stop(void); +uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +uint8_t i2c_stop(uint16_t timeout); diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c index 47c6f8e6c6..19bae33e9f 100755 --- a/drivers/avr/i2c_master.c +++ b/drivers/avr/i2c_master.c @@ -8,7 +8,9 @@ #include "i2c_master.h" #include "timer.h" +#ifndef F_SCL #define F_SCL 400000UL // SCL frequency +#endif #define Prescaler 1 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2) @@ -177,6 +179,9 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16 status = i2c_write(regaddr, timeout); if (status) return status; + status = i2c_stop(timeout); + if (status) return status; + status = i2c_start(devaddr | 0x01, timeout); if (status) return status; @@ -215,4 +220,4 @@ i2c_status_t i2c_stop(uint16_t timeout) } return I2C_STATUS_SUCCESS; -}
\ No newline at end of file +} diff --git a/drivers/avr/i2c_slave.c b/drivers/avr/i2c_slave.c index 27696ca01a..18a29a45a5 100755 --- a/drivers/avr/i2c_slave.c +++ b/drivers/avr/i2c_slave.c @@ -9,23 +9,26 @@ #include "i2c_slave.h" -void i2c_init(uint8_t address){ +volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; + +static volatile uint8_t buffer_address; +static volatile bool slave_has_register_set = false; + +void i2c_slave_init(uint8_t address){ // load address into TWI address register TWAR = (address << 1); // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN); } -void i2c_stop(void){ +void i2c_slave_stop(void){ // clear acknowledge and enable bits TWCR &= ~((1 << TWEA) | (1 << TWEN)); } ISR(TWI_vect){ uint8_t ack = 1; - // temporary stores the received data - //uint8_t data; - + switch(TW_STATUS){ case TW_SR_SLA_ACK: // The device is now a slave receiver @@ -38,13 +41,13 @@ ISR(TWI_vect){ if(!slave_has_register_set){ buffer_address = TWDR; - if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack - ack = 0; - buffer_address = 0; + if (buffer_address >= I2C_SLAVE_REG_COUNT) { // address out of bounds dont ack + ack = 0; + buffer_address = 0; } slave_has_register_set = true; // address has been receaved now fill in buffer } else { - rxbuffer[buffer_address] = TWDR; + i2c_slave_reg[buffer_address] = TWDR; buffer_address++; } break; @@ -52,7 +55,7 @@ ISR(TWI_vect){ case TW_ST_SLA_ACK: case TW_ST_DATA_ACK: // This device is a slave transmitter and master has requested data - TWDR = txbuffer[buffer_address]; + TWDR = i2c_slave_reg[buffer_address]; buffer_address++; break; @@ -63,6 +66,6 @@ ISR(TWI_vect){ break; } - // Reset i2c state mahcine to be ready for next interrupt + // Reset i2c state machine to be ready for next interrupt TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN); }
\ No newline at end of file diff --git a/drivers/avr/i2c_slave.h b/drivers/avr/i2c_slave.h index 1c3b9ecc00..7b5dcbdc3e 100755 --- a/drivers/avr/i2c_slave.h +++ b/drivers/avr/i2c_slave.h @@ -8,16 +8,11 @@ #ifndef I2C_SLAVE_H #define I2C_SLAVE_H -#define TX_BUFFER_SIZE 30 -#define RX_BUFFER_SIZE 30 +#define I2C_SLAVE_REG_COUNT 30 -volatile uint8_t buffer_address; -static volatile bool slave_has_register_set = false; -volatile uint8_t txbuffer[TX_BUFFER_SIZE]; -volatile uint8_t rxbuffer[RX_BUFFER_SIZE]; +extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT]; -void i2c_init(uint8_t address); -void i2c_stop(void); -ISR(TWI_vect); +void i2c_slave_init(uint8_t address); +void i2c_slave_stop(void); #endif // I2C_SLAVE_H
\ No newline at end of file diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h index f7e0c31440..1f9299ffb5 100644 --- a/drivers/avr/ws2812.h +++ b/drivers/avr/ws2812.h @@ -69,7 +69,4 @@ void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask); #define CONCAT_EXP(a, b) CONCAT(a, b) #endif -// #define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port) -// #define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port) - #endif /* LIGHT_WS2812_H_ */ diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.c b/drivers/boards/GENERIC_STM32_F303XC/board.c new file mode 100644 index 0000000000..4331155df4 --- /dev/null +++ b/drivers/boards/GENERIC_STM32_F303XC/board.c @@ -0,0 +1,126 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} +#endif +}; +#endif + +void enter_bootloader_mode_if_requested(void); + +/** + * @brief Early initialization code. + * @details This initialization must be performed just after stack setup + * and before any other initialization. + */ +void __early_init(void) { + enter_bootloader_mode_if_requested(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { +} diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.h b/drivers/boards/GENERIC_STM32_F303XC/board.h new file mode 100644 index 0000000000..11120dfd74 --- /dev/null +++ b/drivers/boards/GENERIC_STM32_F303XC/board.h @@ -0,0 +1,1187 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for Generic STM32_F303 Board + */ + +/* + * Board identifier. + */ +#define BOARD_GENERIC_STM32_F303XC +#define BOARD_NAME "STM32_F303" + +/* + * Board oscillators-related settings. + * NOTE: LSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 0U +#endif + +#define STM32_LSEDRV (3U << 3U) + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 8000000U +#endif + +// #define STM32_HSE_BYPASS + +/* + * MCU type as defined in the ST header. + */ +#define STM32F303xC + +/* + * IO pins assignments. + */ +#define GPIOA_PIN0 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_PIN5 5U +#define GPIOA_PIN6 6U +#define GPIOA_PIN7 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_USB_DM 11U +#define GPIOA_USB_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_PIN3 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_PIN6 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_I2C2_SDA 0U +#define GPIOF_I2C2_SCL 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +#define GPIOG_PIN0 0U +#define GPIOG_PIN1 1U +#define GPIOG_PIN2 2U +#define GPIOG_PIN3 3U +#define GPIOG_PIN4 4U +#define GPIOG_PIN5 5U +#define GPIOG_PIN6 6U +#define GPIOG_PIN7 7U +#define GPIOG_PIN8 8U +#define GPIOG_PIN9 9U +#define GPIOG_PIN10 10U +#define GPIOG_PIN11 11U +#define GPIOG_PIN12 12U +#define GPIOG_PIN13 13U +#define GPIOG_PIN14 14U +#define GPIOG_PIN15 15U + +#define GPIOH_PIN0 0U +#define GPIOH_PIN1 1U +#define GPIOH_PIN2 2U +#define GPIOH_PIN3 3U +#define GPIOH_PIN4 4U +#define GPIOH_PIN5 5U +#define GPIOH_PIN6 6U +#define GPIOH_PIN7 7U +#define GPIOH_PIN8 8U +#define GPIOH_PIN9 9U +#define GPIOH_PIN10 10U +#define GPIOH_PIN11 11U +#define GPIOH_PIN12 12U +#define GPIOH_PIN13 13U +#define GPIOH_PIN14 14U +#define GPIOH_PIN15 15U + +/* + * IO lines assignments. + */ +#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U) +#define LINE_USB_DM PAL_LINE(GPIOA, 11U) +#define LINE_USB_DP PAL_LINE(GPIOA, 12U) +#define LINE_SWDIO PAL_LINE(GPIOA, 13U) +#define LINE_SWCLK PAL_LINE(GPIOA, 14U) + +#define LINE_PIN6 PAL_LINE(GPIOF, 0U) +#define LINE_PIN7 PAL_LINE(GPIOF, 1U) + +#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U) + + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - NC + * PA1 - NC + * PA2 - COL1 + * PA3 - COL2 + * PA4 - SPEAKER1 + * PA5 - SPEAKER2 + * PA6 - COL3 + * PA7 - COL8 + * PA8 - COL6 + * PA9 - COL7 + * PA10 - ROW5 + * PA11 - USB_DM (alternate 14). + * PA12 - USB_DP (alternate 14). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - ROW4 + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ + PIN_MODE_ALTERNATE(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_INPUT(GPIOA_PIN4) | \ + PIN_MODE_INPUT(GPIOA_PIN5) | \ + PIN_MODE_INPUT(GPIOA_PIN6) | \ + PIN_MODE_INPUT(GPIOA_PIN7) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_PIN9) | \ + PIN_MODE_INPUT(GPIOA_PIN10) | \ + PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \ + PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ + PIN_OSPEED_HIGH(GPIOA_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ + PIN_OSPEED_HIGH(GPIOA_USB_DM) | \ + PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \ + PIN_PUPDR_FLOATING(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ + PIN_PUPDR_FLOATING(GPIOA_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_PIN4) | \ + PIN_ODR_HIGH(GPIOA_PIN5) | \ + PIN_ODR_HIGH(GPIOA_PIN6) | \ + PIN_ODR_HIGH(GPIOA_PIN7) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_PIN9) | \ + PIN_ODR_HIGH(GPIOA_PIN10) | \ + PIN_ODR_HIGH(GPIOA_USB_DM) | \ + PIN_ODR_HIGH(GPIOA_USB_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \ + PIN_AFIO_AF(GPIOA_PIN1, 1) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0) | \ + PIN_AFIO_AF(GPIOA_PIN4, 0) | \ + PIN_AFIO_AF(GPIOA_PIN5, 5) | \ + PIN_AFIO_AF(GPIOA_PIN6, 5) | \ + PIN_AFIO_AF(GPIOA_PIN7, 5)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \ + PIN_AFIO_AF(GPIOA_PIN9, 0) | \ + PIN_AFIO_AF(GPIOA_PIN10, 0) | \ + PIN_AFIO_AF(GPIOA_USB_DM, 14) | \ + PIN_AFIO_AF(GPIOA_USB_DP, 14) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0)) + +/* + * GPIOB setup: + * + * PB0 - PIN0 (input pullup). + * PB1 - PIN1 (input pullup). + * PB2 - PIN2 (input pullup). + * PB3 - PIN3 (alternate 0). + * PB4 - PIN4 (input pullup). + * PB5 - PIN5 (input pullup). + * PB6 - PIN6 LSM303DLHC_SCL (alternate 4). + * PB7 - PIN7 LSM303DLHC_SDA (alternate 4). + * PB8 - PIN8 (input pullup). + * PB9 - PIN9 (input pullup). + * PB10 - PIN10 (input pullup). + * PB11 - PIN11 (input pullup). + * PB12 - PIN12 (input pullup). + * PB13 - PIN13 (input pullup). + * PB14 - PIN14 (input pullup). + * PB15 - PIN15 (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_PIN3) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_ALTERNATE(GPIOB_PIN6) | \ + PIN_MODE_OUTPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ + PIN_OSPEED_HIGH(GPIOB_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_FLOATING(GPIOB_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_FLOATING(GPIOB_PIN6) | \ + PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_PIN3) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_PIN6) | \ + PIN_ODR_LOW(GPIOB_PIN7) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0) | \ + PIN_AFIO_AF(GPIOB_PIN3, 0) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0) | \ + PIN_AFIO_AF(GPIOB_PIN6, 4) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0)) + +/* + * GPIOC setup: + * + * PC0 - PIN0 (input pullup). + * PC1 - PIN1 (input pullup). + * PC2 - PIN2 (input pullup). + * PC3 - PIN3 (input pullup). + * PC4 - PIN4 (input pullup). + * PC5 - PIN5 (input pullup). + * PC6 - PIN6 (input pullup). + * PC7 - PIN7 (input pullup). + * PC8 - PIN8 (input pullup). + * PC9 - PIN9 (input pullup). + * PC10 - PIN10 (input pullup). + * PC11 - PIN11 (input pullup). + * PC12 - PIN12 (input pullup). + * PC13 - PIN13 (input pullup). + * PC14 - PIN14 (input floating). + * PC15 - PIN15 (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_INPUT(GPIOC_PIN3) | \ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_INPUT(GPIOC_PIN6) | \ + PIN_MODE_INPUT(GPIOC_PIN7) | \ + PIN_MODE_INPUT(GPIOC_PIN8) | \ + PIN_MODE_INPUT(GPIOC_PIN9) | \ + PIN_MODE_INPUT(GPIOC_PIN10) | \ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_INPUT(GPIOC_PIN12) | \ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_PIN14) | \ + PIN_MODE_INPUT(GPIOC_PIN15)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ + PIN_OSPEED_HIGH(GPIOC_PIN14) | \ + PIN_OSPEED_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOC_PIN14) | \ + PIN_PUPDR_FLOATING(GPIOC_PIN15)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_PIN3) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_HIGH(GPIOC_PIN6) | \ + PIN_ODR_HIGH(GPIOC_PIN7) | \ + PIN_ODR_HIGH(GPIOC_PIN8) | \ + PIN_ODR_HIGH(GPIOC_PIN9) | \ + PIN_ODR_HIGH(GPIOC_PIN10) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_PIN12) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_PIN14) | \ + PIN_ODR_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \ + PIN_AFIO_AF(GPIOC_PIN1, 0) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0) | \ + PIN_AFIO_AF(GPIOC_PIN3, 0) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0) | \ + PIN_AFIO_AF(GPIOC_PIN6, 0) | \ + PIN_AFIO_AF(GPIOC_PIN7, 0)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \ + PIN_AFIO_AF(GPIOC_PIN9, 0) | \ + PIN_AFIO_AF(GPIOC_PIN10, 0) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0) | \ + PIN_AFIO_AF(GPIOC_PIN12, 0) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0) | \ + PIN_AFIO_AF(GPIOC_PIN14, 0) | \ + PIN_AFIO_AF(GPIOC_PIN15, 0)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - PIN4 (input pullup). + * PD5 - PIN5 (input pullup). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD11 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - PIN12 (input pullup). + * PD13 - PIN13 (input pullup). + * PD14 - PIN14 (input pullup). + * PD15 - PIN15 (input pullup). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_INPUT(GPIOD_PIN4) | \ + PIN_MODE_INPUT(GPIOD_PIN5) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_INPUT(GPIOD_PIN12) | \ + PIN_MODE_INPUT(GPIOD_PIN13) | \ + PIN_MODE_INPUT(GPIOD_PIN14) | \ + PIN_MODE_INPUT(GPIOD_PIN15)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN15)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN15)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_PIN4) | \ + PIN_ODR_HIGH(GPIOD_PIN5) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_HIGH(GPIOD_PIN12) | \ + PIN_ODR_HIGH(GPIOD_PIN13) | \ + PIN_ODR_HIGH(GPIOD_PIN14) | \ + PIN_ODR_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0) | \ + PIN_AFIO_AF(GPIOD_PIN4, 0) | \ + PIN_AFIO_AF(GPIOD_PIN5, 0) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0) | \ + PIN_AFIO_AF(GPIOD_PIN12, 0) | \ + PIN_AFIO_AF(GPIOD_PIN13, 0) | \ + PIN_AFIO_AF(GPIOD_PIN14, 0) | \ + PIN_AFIO_AF(GPIOD_PIN15, 0)) + +/* + * GPIOE setup: + * + * PE0 - PIN0 (input pullup). + * PE1 - PIN1 (input pullup). + * PE2 - PIN2 (input pullup). + * PE3 - PIN3 L3GD20_CS (output pushpull maximum). + * PE4 - PIN4 (input pullup). + * PE5 - PIN5 (input pullup). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (output pushpull maximum). + * PE9 - PIN9 (output pushpull maximum). + * PE10 - PIN10 (output pushpull maximum). + * PE11 - PIN11 (output pushpull maximum). + * PE12 - PIN12 (output pushpull maximum). + * PE13 - PIN13 (output pushpull maximum). + * PE14 - PIN14 (output pushpull maximum). + * PE15 - PIN15 (output pushpull maximum). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ + PIN_MODE_INPUT(GPIOE_PIN1) | \ + PIN_MODE_INPUT(GPIOE_PIN2) |\ + PIN_MODE_OUTPUT(GPIOE_PIN3) | \ + PIN_MODE_INPUT(GPIOE_PIN4) |\ + PIN_MODE_INPUT(GPIOE_PIN5) |\ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_OUTPUT(GPIOE_PIN8) | \ + PIN_MODE_OUTPUT(GPIOE_PIN9) | \ + PIN_MODE_OUTPUT(GPIOE_PIN10) | \ + PIN_MODE_OUTPUT(GPIOE_PIN11) | \ + PIN_MODE_OUTPUT(GPIOE_PIN12) | \ + PIN_MODE_OUTPUT(GPIOE_PIN13) | \ + PIN_MODE_OUTPUT(GPIOE_PIN14) | \ + PIN_MODE_OUTPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\ + PIN_OSPEED_HIGH(GPIOE_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\ + PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ + PIN_OSPEED_HIGH(GPIOE_PIN8) | \ + PIN_OSPEED_HIGH(GPIOE_PIN9) | \ + PIN_OSPEED_HIGH(GPIOE_PIN10) | \ + PIN_OSPEED_HIGH(GPIOE_PIN11) | \ + PIN_OSPEED_HIGH(GPIOE_PIN12) | \ + PIN_OSPEED_HIGH(GPIOE_PIN13) | \ + PIN_OSPEED_HIGH(GPIOE_PIN14) | \ + PIN_OSPEED_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN2) |\ + PIN_PUPDR_FLOATING(GPIOE_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN4) |\ + PIN_PUPDR_PULLUP(GPIOE_PIN5) |\ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOE_PIN14) |\ + PIN_PUPDR_FLOATING(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ + PIN_ODR_HIGH(GPIOE_PIN1) | \ + PIN_ODR_HIGH(GPIOE_PIN2) | \ + PIN_ODR_HIGH(GPIOE_PIN3) | \ + PIN_ODR_HIGH(GPIOE_PIN4) | \ + PIN_ODR_HIGH(GPIOE_PIN5) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_LOW(GPIOE_PIN8) | \ + PIN_ODR_LOW(GPIOE_PIN9) | \ + PIN_ODR_LOW(GPIOE_PIN10) | \ + PIN_ODR_LOW(GPIOE_PIN11) | \ + PIN_ODR_LOW(GPIOE_PIN12) | \ + PIN_ODR_LOW(GPIOE_PIN13) | \ + PIN_ODR_LOW(GPIOE_PIN14) | \ + PIN_ODR_LOW(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \ + PIN_AFIO_AF(GPIOE_PIN1, 0) | \ + PIN_AFIO_AF(GPIOE_PIN2, 0) |\ + PIN_AFIO_AF(GPIOE_PIN3, 0) | \ + PIN_AFIO_AF(GPIOE_PIN4, 0) |\ + PIN_AFIO_AF(GPIOE_PIN5, 0) |\ + PIN_AFIO_AF(GPIOE_PIN6, 0) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0)) + +/* + * GPIOF setup: + * + * PF0 - I2C2_SDA (input floating). + * PF1 - I2C2_SCL (input floating). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \ + PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \ + PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \ + PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \ + PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \ + PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \ + PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0)) + +/* + * GPIOG setup: + * + * PG0 - PIN0 (input pullup). + * PG1 - PIN1 (input pullup). + * PG2 - PIN2 (input pullup). + * PG3 - PIN3 (input pullup). + * PG4 - PIN4 (input pullup). + * PG5 - PIN5 (input pullup). + * PG6 - PIN6 (input pullup). + * PG7 - PIN7 (input pullup). + * PG8 - PIN8 (input pullup). + * PG9 - PIN9 (input pullup). + * PG10 - PIN10 (input pullup). + * PG11 - PIN11 (input pullup). + * PG12 - PIN12 (input pullup). + * PG13 - PIN13 (input pullup). + * PG14 - PIN14 (input pullup). + * PG15 - PIN15 (input pullup). + */ +#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ + PIN_MODE_INPUT(GPIOG_PIN1) | \ + PIN_MODE_INPUT(GPIOG_PIN2) | \ + PIN_MODE_INPUT(GPIOG_PIN3) | \ + PIN_MODE_INPUT(GPIOG_PIN4) | \ + PIN_MODE_INPUT(GPIOG_PIN5) | \ + PIN_MODE_INPUT(GPIOG_PIN6) | \ + PIN_MODE_INPUT(GPIOG_PIN7) | \ + PIN_MODE_INPUT(GPIOG_PIN8) | \ + PIN_MODE_INPUT(GPIOG_PIN9) | \ + PIN_MODE_INPUT(GPIOG_PIN10) | \ + PIN_MODE_INPUT(GPIOG_PIN11) | \ + PIN_MODE_INPUT(GPIOG_PIN12) | \ + PIN_MODE_INPUT(GPIOG_PIN13) | \ + PIN_MODE_INPUT(GPIOG_PIN14) | \ + PIN_MODE_INPUT(GPIOG_PIN15)) +#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) +#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOG_PIN15)) +#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN15)) +#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ + PIN_ODR_HIGH(GPIOG_PIN1) | \ + PIN_ODR_HIGH(GPIOG_PIN2) | \ + PIN_ODR_HIGH(GPIOG_PIN3) | \ + PIN_ODR_HIGH(GPIOG_PIN4) | \ + PIN_ODR_HIGH(GPIOG_PIN5) | \ + PIN_ODR_HIGH(GPIOG_PIN6) | \ + PIN_ODR_HIGH(GPIOG_PIN7) | \ + PIN_ODR_HIGH(GPIOG_PIN8) | \ + PIN_ODR_HIGH(GPIOG_PIN9) | \ + PIN_ODR_HIGH(GPIOG_PIN10) | \ + PIN_ODR_HIGH(GPIOG_PIN11) | \ + PIN_ODR_HIGH(GPIOG_PIN12) | \ + PIN_ODR_HIGH(GPIOG_PIN13) | \ + PIN_ODR_HIGH(GPIOG_PIN14) | \ + PIN_ODR_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \ + PIN_AFIO_AF(GPIOG_PIN1, 0) | \ + PIN_AFIO_AF(GPIOG_PIN2, 0) | \ + PIN_AFIO_AF(GPIOG_PIN3, 0) | \ + PIN_AFIO_AF(GPIOG_PIN4, 0) | \ + PIN_AFIO_AF(GPIOG_PIN5, 0) | \ + PIN_AFIO_AF(GPIOG_PIN6, 0) | \ + PIN_AFIO_AF(GPIOG_PIN7, 0)) +#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \ + PIN_AFIO_AF(GPIOG_PIN9, 0) | \ + PIN_AFIO_AF(GPIOG_PIN10, 0) | \ + PIN_AFIO_AF(GPIOG_PIN11, 0) | \ + PIN_AFIO_AF(GPIOG_PIN12, 0) | \ + PIN_AFIO_AF(GPIOG_PIN13, 0) | \ + PIN_AFIO_AF(GPIOG_PIN14, 0) | \ + PIN_AFIO_AF(GPIOG_PIN15, 0)) + +/* + * GPIOH setup: + * + * PH0 - PIN0 (input pullup). + * PH1 - PIN1 (input pullup). + * PH2 - PIN2 (input pullup). + * PH3 - PIN3 (input pullup). + * PH4 - PIN4 (input pullup). + * PH5 - PIN5 (input pullup). + * PH6 - PIN6 (input pullup). + * PH7 - PIN7 (input pullup). + * PH8 - PIN8 (input pullup). + * PH9 - PIN9 (input pullup). + * PH10 - PIN10 (input pullup). + * PH11 - PIN11 (input pullup). + * PH12 - PIN12 (input pullup). + * PH13 - PIN13 (input pullup). + * PH14 - PIN14 (input pullup). + * PH15 - PIN15 (input pullup). + */ +#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \ + PIN_MODE_INPUT(GPIOH_PIN1) | \ + PIN_MODE_INPUT(GPIOH_PIN2) | \ + PIN_MODE_INPUT(GPIOH_PIN3) | \ + PIN_MODE_INPUT(GPIOH_PIN4) | \ + PIN_MODE_INPUT(GPIOH_PIN5) | \ + PIN_MODE_INPUT(GPIOH_PIN6) | \ + PIN_MODE_INPUT(GPIOH_PIN7) | \ + PIN_MODE_INPUT(GPIOH_PIN8) | \ + PIN_MODE_INPUT(GPIOH_PIN9) | \ + PIN_MODE_INPUT(GPIOH_PIN10) | \ + PIN_MODE_INPUT(GPIOH_PIN11) | \ + PIN_MODE_INPUT(GPIOH_PIN12) | \ + PIN_MODE_INPUT(GPIOH_PIN13) | \ + PIN_MODE_INPUT(GPIOH_PIN14) | \ + PIN_MODE_INPUT(GPIOH_PIN15)) +#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) +#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOH_PIN15)) +#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN15)) +#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \ + PIN_ODR_HIGH(GPIOH_PIN1) | \ + PIN_ODR_HIGH(GPIOH_PIN2) | \ + PIN_ODR_HIGH(GPIOH_PIN3) | \ + PIN_ODR_HIGH(GPIOH_PIN4) | \ + PIN_ODR_HIGH(GPIOH_PIN5) | \ + PIN_ODR_HIGH(GPIOH_PIN6) | \ + PIN_ODR_HIGH(GPIOH_PIN7) | \ + PIN_ODR_HIGH(GPIOH_PIN8) | \ + PIN_ODR_HIGH(GPIOH_PIN9) | \ + PIN_ODR_HIGH(GPIOH_PIN10) | \ + PIN_ODR_HIGH(GPIOH_PIN11) | \ + PIN_ODR_HIGH(GPIOH_PIN12) | \ + PIN_ODR_HIGH(GPIOH_PIN13) | \ + PIN_ODR_HIGH(GPIOH_PIN14) | \ + PIN_ODR_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \ + PIN_AFIO_AF(GPIOH_PIN1, 0) | \ + PIN_AFIO_AF(GPIOH_PIN2, 0) | \ + PIN_AFIO_AF(GPIOH_PIN3, 0) | \ + PIN_AFIO_AF(GPIOH_PIN4, 0) | \ + PIN_AFIO_AF(GPIOH_PIN5, 0) | \ + PIN_AFIO_AF(GPIOH_PIN6, 0) | \ + PIN_AFIO_AF(GPIOH_PIN7, 0)) +#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \ + PIN_AFIO_AF(GPIOH_PIN9, 0) | \ + PIN_AFIO_AF(GPIOH_PIN10, 0) | \ + PIN_AFIO_AF(GPIOH_PIN11, 0) | \ + PIN_AFIO_AF(GPIOH_PIN12, 0) | \ + PIN_AFIO_AF(GPIOH_PIN13, 0) | \ + PIN_AFIO_AF(GPIOH_PIN14, 0) | \ + PIN_AFIO_AF(GPIOH_PIN15, 0)) + + +/* + * USB bus activation macro, required by the USB driver. + */ +// #define usb_lld_connect_bus(usbp) +#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14))) +// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT) +/* + * USB bus de-activation macro, required by the USB driver. + */ +// #define usb_lld_disconnect_bus(usbp) +#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP) +// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12) + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.mk b/drivers/boards/GENERIC_STM32_F303XC/board.mk new file mode 100644 index 0000000000..43377629a3 --- /dev/null +++ b/drivers/boards/GENERIC_STM32_F303XC/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC diff --git a/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h b/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h new file mode 100644 index 0000000000..3b0e9d20a6 --- /dev/null +++ b/drivers/boards/GENERIC_STM32_F303XC/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c new file mode 100644 index 0000000000..97ca292b9b --- /dev/null +++ b/drivers/haptic/DRV2605L.c @@ -0,0 +1,129 @@ +/* Copyright 2018 ishtob + * Driver for DRV2605L written for QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "DRV2605L.h" +#include "print.h" +#include <stdlib.h> +#include <stdio.h> +#include <math.h> + + +uint8_t DRV2605L_transfer_buffer[20]; +uint8_t DRV2605L_tx_register[0]; +uint8_t DRV2605L_read_buffer[0]; +uint8_t DRV2605L_read_register; + + +void DRV_write(uint8_t drv_register, uint8_t settings) { + DRV2605L_transfer_buffer[0] = drv_register; + DRV2605L_transfer_buffer[1] = settings; + i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100); +} + +uint8_t DRV_read(uint8_t regaddress) { + DRV2605L_tx_register[0] = regaddress; + if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1, + DRV2605L_tx_register, 1, + DRV2605L_read_buffer, 1 +)){ + printf("err reading reg \n"); + } + DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0]; +return DRV2605L_read_register; +} + +void DRV_init(void) +{ + i2c_init(); + i2c_start(DRV2605L_BASE_ADDRESS); + + /* 0x07 sets DRV2605 into calibration mode */ + DRV_write(DRV_MODE,0x07); + +// DRV_write(DRV_FEEDBACK_CTRL,0xB6); + + #if FB_ERM_LRA == 0 + /* ERM settings */ + DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000); + #if ERM_OPEN_LOOP == 0 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003))); + #elif ERM_OPEN_LOOP == 1 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196)); + #endif + #elif FB_ERM_LRA == 1 + DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071))); + #if LRA_OPEN_LOOP == 0 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133))); + #elif LRA_OPEN_LOOP == 1 + DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196)); + #endif + #endif + + DRVREG_FBR FB_SET; + FB_SET.Bits.ERM_LRA = FB_ERM_LRA; + FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR; + FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN; + FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/ + DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte); + DRVREG_CTRL1 C1_SET; + C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME; + C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE; + C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST; + DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte); + DRVREG_CTRL2 C2_SET; + C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT; + C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB; + C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME; + C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME; + C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME; + DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte); + DRVREG_CTRL3 C3_SET; + C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP; + C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG; + C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE; + C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO; + C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS; + C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP; + C3_SET.Bits.C3_NG_THRESH = NG_THRESH; + DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte); + DRVREG_CTRL4 C4_SET; + C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME; + C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME; + DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte); + DRV_write(DRV_LIB_SELECTION,LIB_SELECTION); + //start autocalibration + DRV_write(DRV_GO, 0x01); + + /* 0x00 sets DRV2605 out of standby and to use internal trigger + * 0x01 sets DRV2605 out of standby and to use external trigger */ + DRV_write(DRV_MODE,0x00); + + /* 0x06: LRA library */ + DRV_write(DRV_WAVEFORM_SEQ_1, 0x01); + + /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF + * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */ + + /* TODO: setup auto-calibration as part of initiation */ + +} + +void DRV_pulse(uint8_t sequence) +{ + DRV_write(DRV_GO, 0x00); + DRV_write(DRV_WAVEFORM_SEQ_1, sequence); + DRV_write(DRV_GO, 0x01); +}
\ No newline at end of file diff --git a/drivers/haptic/DRV2605L.h b/drivers/haptic/DRV2605L.h new file mode 100644 index 0000000000..de9d294e9d --- /dev/null +++ b/drivers/haptic/DRV2605L.h @@ -0,0 +1,394 @@ +/* Copyright 2018 ishtob + * Driver for DRV2605L written for QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "i2c_master.h" + +/* Initialization settings + + * Feedback Control Settings */ +#ifndef FB_ERM_LRA +#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ +#endif +#ifndef FB_BRAKEFACTOR +#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#endif +#ifndef FB_LOOPGAIN +#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ +#endif + +#ifndef RATED_VOLTAGE +#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */ +#ifndef V_PEAK +#define V_PEAK 2.8 +#endif +#endif + +/* LRA specific settings */ +#if FB_ERM_LRA == 1 +#ifndef V_RMS +#define V_RMS 2.0 +#endif +#ifndef V_PEAK +#define V_PEAK 2.1 +#endif +#ifndef F_LRA +#define F_LRA 205 +#endif +#endif + +/* Library Selection */ +#ifndef LIB_SELECTION +#if FB_ERM_LRA == 1 +#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ +#else +#define LIB_SELECTION 1 +#endif +#endif + +/* Control 1 register settings */ +#ifndef DRIVE_TIME +#define DRIVE_TIME 25 +#endif +#ifndef AC_COUPLE +#define AC_COUPLE 0 +#endif +#ifndef STARTUP_BOOST +#define STARTUP_BOOST 1 +#endif + +/* Control 2 Settings */ +#ifndef BIDIR_INPUT +#define BIDIR_INPUT 1 +#endif +#ifndef BRAKE_STAB +#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ +#endif +#ifndef SAMPLE_TIME +#define SAMPLE_TIME 3 +#endif +#ifndef BLANKING_TIME +#define BLANKING_TIME 1 +#endif +#ifndef IDISS_TIME +#define IDISS_TIME 1 +#endif + +/* Control 3 settings */ +#ifndef NG_THRESH +#define NG_THRESH 2 +#endif +#ifndef ERM_OPEN_LOOP +#define ERM_OPEN_LOOP 1 +#endif +#ifndef SUPPLY_COMP_DIS +#define SUPPLY_COMP_DIS 0 +#endif +#ifndef DATA_FORMAT_RTO +#define DATA_FORMAT_RTO 0 +#endif +#ifndef LRA_DRIVE_MODE +#define LRA_DRIVE_MODE 0 +#endif +#ifndef N_PWM_ANALOG +#define N_PWM_ANALOG 0 +#endif +#ifndef LRA_OPEN_LOOP +#define LRA_OPEN_LOOP 0 +#endif + +/* Control 4 settings */ +#ifndef ZC_DET_TIME +#define ZC_DET_TIME 0 +#endif +#ifndef AUTO_CAL_TIME +#define AUTO_CAL_TIME 3 +#endif + +/* register defines -------------------------------------------------------- */ +#define DRV2605L_BASE_ADDRESS 0x5A /* DRV2605L Base address */ +#define DRV_STATUS 0x00 +#define DRV_MODE 0x01 +#define DRV_RTP_INPUT 0x02 +#define DRV_LIB_SELECTION 0x03 +#define DRV_WAVEFORM_SEQ_1 0x04 +#define DRV_WAVEFORM_SEQ_2 0x05 +#define DRV_WAVEFORM_SEQ_3 0x06 +#define DRV_WAVEFORM_SEQ_4 0x07 +#define DRV_WAVEFORM_SEQ_5 0x08 +#define DRV_WAVEFORM_SEQ_6 0x09 +#define DRV_WAVEFORM_SEQ_7 0x0A +#define DRV_WAVEFORM_SEQ_8 0x0B +#define DRV_GO 0x0C +#define DRV_OVERDRIVE_TIME_OFFSET 0x0D +#define DRV_SUSTAIN_TIME_OFFSET_P 0x0E +#define DRV_SUSTAIN_TIME_OFFSET_N 0x0F +#define DRV_BRAKE_TIME_OFFSET 0x10 +#define DRV_AUDIO_2_VIBE_CTRL 0x11 +#define DRV_AUDIO_2_VIBE_MIN_IN 0x12 +#define DRV_AUDIO_2_VIBE_MAX_IN 0x13 +#define DRV_AUDIO_2_VIBE_MIN_OUTDRV 0x14 +#define DRV_AUDIO_2_VIBE_MAX_OUTDRV 0x15 +#define DRV_RATED_VOLT 0x16 +#define DRV_OVERDRIVE_CLAMP_VOLT 0x17 +#define DRV_AUTO_CALIB_COMP_RESULT 0x18 +#define DRV_AUTO_CALIB_BEMF_RESULT 0x19 +#define DRV_FEEDBACK_CTRL 0x1A +#define DRV_CTRL_1 0x1B +#define DRV_CTRL_2 0x1C +#define DRV_CTRL_3 0x1D +#define DRV_CTRL_4 0x1E +#define DRV_CTRL_5 0x1F +#define DRV_OPEN_LOOP_PERIOD 0x20 +#define DRV_VBAT_VOLT_MONITOR 0x21 +#define DRV_LRA_RESONANCE_PERIOD 0x22 + +void DRV_init(void); +void DRV_write(const uint8_t drv_register, const uint8_t settings); +uint8_t DRV_read(const uint8_t regaddress); +void DRV_pulse(const uint8_t sequence); + + +typedef enum DRV_EFFECT{ + clear_sequence = 0, + strong_click = 1, + strong_click_60 = 2, + strong_click_30 = 3, + sharp_click = 4, + sharp_click_60 = 5, + sharp_click_30 = 6, + soft_bump = 7, + soft_bump_60 = 8, + soft_bump_30 = 9, + dbl_click = 10, + dbl_click_60 = 11, + trp_click = 12, + soft_fuzz = 13, + strong_buzz = 14, + alert_750ms = 15, + alert_1000ms = 16, + strong_click1 = 17, + strong_click2_80 = 18, + strong_click3_60 = 19, + strong_click4_30 = 20, + medium_click1 = 21, + medium_click2_80 = 22, + medium_click3_60 = 23, + sharp_tick1 = 24, + sharp_tick2_80 = 25, + sharp_tick3_60 = 26, + sh_dblclick_str = 27, + sh_dblclick_str_80 = 28, + sh_dblclick_str_60 = 29, + sh_dblclick_str_30 = 30, + sh_dblclick_med = 31, + sh_dblclick_med_80 = 32, + sh_dblclick_med_60 = 33, + sh_dblsharp_tick = 34, + sh_dblsharp_tick_80 = 35, + sh_dblsharp_tick_60 = 36, + lg_dblclick_str = 37, + lg_dblclick_str_80 = 38, + lg_dblclick_str_60 = 39, + lg_dblclick_str_30 = 40, + lg_dblclick_med = 41, + lg_dblclick_med_80 = 42, + lg_dblclick_med_60 = 43, + lg_dblsharp_tick = 44, + lg_dblsharp_tick_80 = 45, + lg_dblsharp_tick_60 = 46, + buzz = 47, + buzz_80 = 48, + buzz_60 = 49, + buzz_40 = 50, + buzz_20 = 51, + pulsing_strong = 52, + pulsing_strong_80 = 53, + pulsing_medium = 54, + pulsing_medium_80 = 55, + pulsing_sharp = 56, + pulsing_sharp_80 = 57, + transition_click = 58, + transition_click_80 = 59, + transition_click_60 = 60, + transition_click_40 = 61, + transition_click_20 = 62, + transition_click_10 = 63, + transition_hum = 64, + transition_hum_80 = 65, + transition_hum_60 = 66, + transition_hum_40 = 67, + transition_hum_20 = 68, + transition_hum_10 = 69, + transition_rampdown_long_smooth1 = 70, + transition_rampdown_long_smooth2 = 71, + transition_rampdown_med_smooth1 = 72, + transition_rampdown_med_smooth2 = 73, + transition_rampdown_short_smooth1 = 74, + transition_rampdown_short_smooth2 = 75, + transition_rampdown_long_sharp1 = 76, + transition_rampdown_long_sharp2 = 77, + transition_rampdown_med_sharp1 = 78, + transition_rampdown_med_sharp2 = 79, + transition_rampdown_short_sharp1 = 80, + transition_rampdown_short_sharp2 = 81, + transition_rampup_long_smooth1 = 82, + transition_rampup_long_smooth2 = 83, + transition_rampup_med_smooth1 = 84, + transition_rampup_med_smooth2 = 85, + transition_rampup_short_smooth1 = 86, + transition_rampup_short_smooth2 = 87, + transition_rampup_long_sharp1 = 88, + transition_rampup_long_sharp2 = 89, + transition_rampup_med_sharp1 = 90, + transition_rampup_med_sharp2 = 91, + transition_rampup_short_sharp1 = 92, + transition_rampup_short_sharp2 = 93, + transition_rampdown_long_smooth1_50 = 94, + transition_rampdown_long_smooth2_50 = 95, + transition_rampdown_med_smooth1_50 = 96, + transition_rampdown_med_smooth2_50 = 97, + transition_rampdown_short_smooth1_50 = 98, + transition_rampdown_short_smooth2_50 = 99, + transition_rampdown_long_sharp1_50 = 100, + transition_rampdown_long_sharp2_50 = 101, + transition_rampdown_med_sharp1_50 = 102, + transition_rampdown_med_sharp2_50 = 103, + transition_rampdown_short_sharp1_50 = 104, + transition_rampdown_short_sharp2_50 = 105, + transition_rampup_long_smooth1_50 = 106, + transition_rampup_long_smooth2_50 = 107, + transition_rampup_med_smooth1_50 = 108, + transition_rampup_med_smooth2_50 = 109, + transition_rampup_short_smooth1_50 = 110, + transition_rampup_short_smooth2_50 = 111, + transition_rampup_long_sharp1_50 = 112, + transition_rampup_long_sharp2_50 = 113, + transition_rampup_med_sharp1_50 = 114, + transition_rampup_med_sharp2_50 = 115, + transition_rampup_short_sharp1_50 = 116, + transition_rampup_short_sharp2_50 = 117, + long_buzz_for_programmatic_stopping = 118, + smooth_hum1_50 = 119, + smooth_hum2_40 = 120, + smooth_hum3_30 = 121, + smooth_hum4_20 = 122, + smooth_hum5_10 = 123, +} DRV_EFFECT; + +/* Register bit array unions */ + +typedef union DRVREG_STATUS { /* register 0x00 */ + uint8_t Byte; + struct { + uint8_t OC_DETECT :1; /* set to 1 when overcurrent event is detected */ + uint8_t OVER_TEMP :1; /* set to 1 when device exceeds temp threshold */ + uint8_t FB_STS :1; /* set to 1 when feedback controller has timed out */ + /* auto-calibration routine and diagnostic result + * result | auto-calibation | diagnostic | + * 0 | passed | actuator func normal | + * 1 | failed | actuator func fault* | + * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */ + uint8_t DIAG_RESULT :1; + uint8_t :1; + uint8_t DEVICE_ID :3; /* Device IDs 3: DRV2605 4: DRV2604 5: DRV2604L 6: DRV2605L */ + } Bits; +} DRVREG_STATUS; + +typedef union DRVREG_MODE { /* register 0x01 */ + uint8_t Byte; + struct { + uint8_t MODE :3; /* Mode setting */ + uint8_t :3; + uint8_t STANDBY :1; /* 0:standby 1:ready */ + } Bits; +} DRVREG_MODE; + +typedef union DRVREG_WAIT { + uint8_t Byte; + struct { + uint8_t WAIT_MODE :1; /* Set to 1 to interpret as wait for next 7 bits x10ms */ + uint8_t WAIT_TIME :7; + } Bits; +} DRVREG_WAIT; + +typedef union DRVREG_FBR{ /* register 0x1A */ + uint8_t Byte; + struct { + uint8_t BEMF_GAIN :2; + uint8_t LOOP_GAIN :2; + uint8_t BRAKE_FACTOR :3; + uint8_t ERM_LRA :1; + } Bits; +} DRVREG_FBR; + +typedef union DRVREG_CTRL1{ /* register 0x1B */ + uint8_t Byte; + struct { + uint8_t C1_DRIVE_TIME :5; + uint8_t C1_AC_COUPLE :1; + uint8_t :1; + uint8_t C1_STARTUP_BOOST :1; + } Bits; +} DRVREG_CTRL1; + +typedef union DRVREG_CTRL2{ /* register 0x1C */ + uint8_t Byte; + struct { + uint8_t C2_IDISS_TIME :2; + uint8_t C2_BLANKING_TIME :2; + uint8_t C2_SAMPLE_TIME :2; + uint8_t C2_BRAKE_STAB :1; + uint8_t C2_BIDIR_INPUT :1; + } Bits; +} DRVREG_CTRL2; + +typedef union DRVREG_CTRL3{ /* register 0x1D */ + uint8_t Byte; + struct { + uint8_t C3_LRA_OPEN_LOOP :1; + uint8_t C3_N_PWM_ANALOG :1; + uint8_t C3_LRA_DRIVE_MODE :1; + uint8_t C3_DATA_FORMAT_RTO :1; + uint8_t C3_SUPPLY_COMP_DIS :1; + uint8_t C3_ERM_OPEN_LOOP :1; + uint8_t C3_NG_THRESH :2; + } Bits; +} DRVREG_CTRL3; + +typedef union DRVREG_CTRL4{ /* register 0x1E */ + uint8_t Byte; + struct { + uint8_t C4_OTP_PROGRAM :1; + uint8_t :1; + uint8_t C4_OTP_STATUS :1; + uint8_t :1; + uint8_t C4_AUTO_CAL_TIME :2; + uint8_t C4_ZC_DET_TIME :2; + } Bits; +} DRVREG_CTRL4; + +typedef union DRVREG_CTRL5{ /* register 0x1F */ + uint8_t Byte; + struct { + uint8_t C5_IDISS_TIME :2; + uint8_t C5_BLANKING_TIME :2; + uint8_t C5_PLAYBACK_INTERVAL :1; + uint8_t C5_LRA_AUTO_OPEN_LOOP :1; + uint8_t C5_AUTO_OL_CNT :2; + } Bits; +} DRVREG_CTRL5;
\ No newline at end of file diff --git a/drivers/issi/is31fl3218.c b/drivers/issi/is31fl3218.c new file mode 100644 index 0000000000..db44f72564 --- /dev/null +++ b/drivers/issi/is31fl3218.c @@ -0,0 +1,102 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "is31fl3218.h" +#include "i2c_master.h" + +// This is the full 8-bit address +#define ISSI_ADDRESS 0b10101000 + +// These are the register addresses +#define ISSI_REG_SHUTDOWN 0x00 +#define ISSI_REG_PWM 0x01 +#define ISSI_REG_CONTROL 0x13 +#define ISSI_REG_UPDATE 0x16 +#define ISSI_REG_RESET 0x17 + +// Default timeout if no I2C response +#define ISSI_TIMEOUT 100 + +// Reusable buffer for transfers +uint8_t g_twi_transfer_buffer[20]; + +// IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining. +// If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB +uint8_t g_pwm_buffer[18]; +bool g_pwm_buffer_update_required = false; + +void IS31FL3218_write_register( uint8_t reg, uint8_t data ) +{ + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT); +} + +void IS31FL3218_write_pwm_buffer( uint8_t *pwm_buffer ) +{ + g_twi_transfer_buffer[0] = ISSI_REG_PWM; + for ( int i=0; i<18; i++ ) { + g_twi_transfer_buffer[1+i] = pwm_buffer[i]; + } + + i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT); +} + +void IS31FL3218_init(void) +{ + // In case we ever want to reinitialize (?) + IS31FL3218_write_register( ISSI_REG_RESET, 0x00 ); + + // Turn off software shutdown + IS31FL3218_write_register( ISSI_REG_SHUTDOWN, 0x01 ); + + // Set all PWM values to zero + for ( uint8_t i = 0; i < 18; i++ ) { + IS31FL3218_write_register( ISSI_REG_PWM+i, 0x00 ); + } + + // Enable all channels + for ( uint8_t i = 0; i < 3; i++ ) { + IS31FL3218_write_register( ISSI_REG_CONTROL+i, 0b00111111 ); + } + + // Load PWM registers and LED Control register data + IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 ); +} + +void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +{ + g_pwm_buffer[index * 3 + 0] = red; + g_pwm_buffer[index * 3 + 1] = green; + g_pwm_buffer[index * 3 + 2] = blue; + g_pwm_buffer_update_required = true; +} + +void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +{ + for ( int i = 0; i < 6; i++ ) { + IS31FL3218_set_color( i, red, green, blue ); + } +} + +void IS31FL3218_update_pwm_buffers(void) +{ + if ( g_pwm_buffer_update_required ) { + IS31FL3218_write_pwm_buffer( g_pwm_buffer ); + // Load PWM registers and LED Control register data + IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 ); + } + g_pwm_buffer_update_required = false; +} diff --git a/drivers/issi/is31fl3218.h b/drivers/issi/is31fl3218.h new file mode 100644 index 0000000000..2d24e51463 --- /dev/null +++ b/drivers/issi/is31fl3218.h @@ -0,0 +1,24 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +void IS31FL3218_init(void); +void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3218_update_pwm_buffers(void); diff --git a/drivers/is31fl3731.c b/drivers/issi/is31fl3731.c index 0524feb49f..c9155f5a37 100644 --- a/drivers/is31fl3731.c +++ b/drivers/issi/is31fl3731.c @@ -91,7 +91,7 @@ bool g_led_control_registers_update_required = false; // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09 -void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data ) +void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data ) { g_twi_transfer_buffer[0] = reg; g_twi_transfer_buffer[1] = data; @@ -106,7 +106,7 @@ void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data ) #endif } -void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) +void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) { // assumes bank is already selected @@ -135,7 +135,7 @@ void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) } } -void IS31_init( uint8_t addr ) +void IS31FL3731_init( uint8_t addr ) { // In order to avoid the LEDs being driven with garbage data // in the LED driver's PWM registers, first enable software shutdown, @@ -143,10 +143,10 @@ void IS31_init( uint8_t addr ) // then disable software shutdown. // select "function register" bank - IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG ); + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG ); // enable software shutdown - IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 ); + IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 ); // this delay was copied from other drivers, might not be needed #ifdef __AVR__ _delay_ms( 10 ); @@ -155,47 +155,47 @@ void IS31_init( uint8_t addr ) #endif // picture mode - IS31_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE ); + IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE ); // display frame 0 - IS31_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 ); + IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 ); // audio sync off - IS31_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 ); + IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 ); // select bank 0 - IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 ); + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 ); // turn off all LEDs in the LED control register for ( int i = 0x00; i <= 0x11; i++ ) { - IS31_write_register( addr, i, 0x00 ); + IS31FL3731_write_register( addr, i, 0x00 ); } // turn off all LEDs in the blink control register (not really needed) for ( int i = 0x12; i <= 0x23; i++ ) { - IS31_write_register( addr, i, 0x00 ); + IS31FL3731_write_register( addr, i, 0x00 ); } // set PWM on all LEDs to 0 for ( int i = 0x24; i <= 0xB3; i++ ) { - IS31_write_register( addr, i, 0x00 ); + IS31FL3731_write_register( addr, i, 0x00 ); } // select "function register" bank - IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG ); + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG ); // disable software shutdown - IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 ); + IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 ); // select bank 0 and leave it selected. // most usage after initialization is just writing PWM buffers in bank 0 // as there's not much point in double-buffering - IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 ); + IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 ); } -void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) { if ( index >= 0 && index < DRIVER_LED_TOTAL ) { is31_led led = g_is31_leds[index]; @@ -208,15 +208,15 @@ void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) } } -void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) { for ( int i = 0; i < DRIVER_LED_TOTAL; i++ ) { - IS31_set_color( i, red, green, blue ); + IS31FL3731_set_color( i, red, green, blue ); } } -void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue ) +void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue ) { is31_led led = g_is31_leds[index]; @@ -247,25 +247,24 @@ void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool bl } -void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ) +void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ) { if ( g_pwm_buffer_update_required ) { - IS31_write_pwm_buffer( addr1, g_pwm_buffer[0] ); - IS31_write_pwm_buffer( addr2, g_pwm_buffer[1] ); + IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] ); + IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] ); } g_pwm_buffer_update_required = false; } -void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 ) +void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 ) { if ( g_led_control_registers_update_required ) { for ( int i=0; i<18; i++ ) { - IS31_write_register(addr1, i, g_led_control_registers[0][i] ); - IS31_write_register(addr2, i, g_led_control_registers[1][i] ); + IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] ); + IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] ); } } } - diff --git a/drivers/is31fl3731.h b/drivers/issi/is31fl3731.h index 9e195c240e..f354a12db2 100644 --- a/drivers/is31fl3731.h +++ b/drivers/issi/is31fl3731.h @@ -31,21 +31,21 @@ typedef struct is31_led { extern const is31_led g_is31_leds[DRIVER_LED_TOTAL]; -void IS31_init( uint8_t addr ); -void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data ); -void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ); +void IS31FL3731_init( uint8_t addr ); +void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data ); +void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ); -void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); -void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); -void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue ); +void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue ); // This should not be called from an interrupt // (eg. from a timer interrupt). // Call this while idle (in between matrix scans). // If the buffer is dirty, it will update the driver with the buffer. -void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ); -void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 ); +void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ); +void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 ); #define C1_1 0x24 #define C1_2 0x25 diff --git a/drivers/issi/is31fl3733.c b/drivers/issi/is31fl3733.c new file mode 100644 index 0000000000..c18ed7ca30 --- /dev/null +++ b/drivers/issi/is31fl3733.c @@ -0,0 +1,252 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifdef __AVR__ +#include <avr/interrupt.h> +#include <avr/io.h> +#include <util/delay.h> +#else +#include "wait.h" +#endif + +#include "is31fl3733.h" +#include <string.h> +#include "i2c_master.h" +#include "progmem.h" + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define ISSI_ADDR_DEFAULT 0x50 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_INTERRUPTMASKREGISTER 0xF0 +#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 + +#define ISSI_PAGE_LEDCONTROL 0x00 //PG0 +#define ISSI_PAGE_PWM 0x01 //PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 //PG2 +#define ISSI_PAGE_FUNCTION 0x03 //PG3 + +#define ISSI_REG_CONFIGURATION 0x00 //PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 //PG3 +#define ISSI_REG_RESET 0x11// PG3 +#define ISSI_REG_SWPULLUP 0x0F //PG3 +#define ISSI_REG_CSPULLUP 0x10 //PG3 + +#ifndef ISSI_TIMEOUT + #define ISSI_TIMEOUT 100 +#endif + +#ifndef ISSI_PERSISTENCE + #define ISSI_PERSISTENCE 0 +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the IS31FL3733 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required = false; + +uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } }; +bool g_led_control_registers_update_required = false; + +void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data ) +{ + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + + #if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) + break; + } + #else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT); + #endif +} + +void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) +{ + // assumes PG1 is already selected + + // transmit PWM registers in 12 transfers of 16 bytes + // g_twi_transfer_buffer[] is 20 bytes + + // iterate over the pwm_buffer contents at 16 byte intervals + for ( int i = 0; i < 192; i += 16 ) { + g_twi_transfer_buffer[0] = i; + // copy the data from i to i+15 + // device will auto-increment register for data after the first byte + // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer + for ( int j = 0; j < 16; j++ ) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + + #if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) + break; + } + #else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT); + #endif + } +} + +void IS31FL3733_init( uint8_t addr ) +{ + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + // Unlock the command register. + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG0 + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); + // Turn off all LEDs. + for ( int i = 0x00; i <= 0x17; i++ ) + { + IS31FL3733_write_register( addr, i, 0x00 ); + } + + // Unlock the command register. + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG1 + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); + // Set PWM on all LEDs to 0 + // No need to setup Breath registers to PWM as that is the default. + for ( int i = 0x00; i <= 0xBF; i++ ) + { + IS31FL3733_write_register( addr, i, 0x00 ); + } + + // Unlock the command register. + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG3 + IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION ); + // Set global current to maximum. + IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF ); + // Disable software shutdown. + IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 ); + + // Wait 10ms to ensure the device has woken up. + #ifdef __AVR__ + _delay_ms( 10 ); + #else + wait_ms(10); + #endif +} + +void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +{ + if ( index >= 0 && index < DRIVER_LED_TOTAL ) { + is31_led led = g_is31_leds[index]; + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required = true; + } +} + +void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +{ + for ( int i = 0; i < DRIVER_LED_TOTAL; i++ ) + { + IS31FL3733_set_color( i, red, green, blue ); + } +} + +void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue ) +{ + is31_led led = g_is31_leds[index]; + + uint8_t control_register_r = led.r / 8; + uint8_t control_register_g = led.g / 8; + uint8_t control_register_b = led.b / 8; + uint8_t bit_r = led.r % 8; + uint8_t bit_g = led.g % 8; + uint8_t bit_b = led.b % 8; + + if ( red ) { + g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); + } else { + g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); + } + if ( green ) { + g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); + } else { + g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); + } + if ( blue ) { + g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); + } else { + g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); + } + + g_led_control_registers_update_required = true; + +} + +void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_pwm_buffer_update_required ) + { + // Firstly we need to unlock the command register and select PG1 + IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); + + IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] ); + //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] ); + } + g_pwm_buffer_update_required = false; +} + +void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_led_control_registers_update_required ) + { + // Firstly we need to unlock the command register and select PG0 + IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); + for ( int i=0; i<24; i++ ) + { + IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] ); + //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] ); + } + } +} diff --git a/drivers/issi/is31fl3733.h b/drivers/issi/is31fl3733.h new file mode 100644 index 0000000000..3d23b188aa --- /dev/null +++ b/drivers/issi/is31fl3733.h @@ -0,0 +1,255 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#ifndef IS31FL3733_DRIVER_H +#define IS31FL3733_DRIVER_H + +#include <stdint.h> +#include <stdbool.h> + +typedef struct is31_led { + uint8_t driver:2; + uint8_t r; + uint8_t g; + uint8_t b; +} __attribute__((packed)) is31_led; + +extern const is31_led g_is31_leds[DRIVER_LED_TOTAL]; + +void IS31FL3733_init( uint8_t addr ); +void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data ); +void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ); + +void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); + +void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue ); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ); +void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 ); + +#define A_1 0x00 +#define A_2 0x01 +#define A_3 0x02 +#define A_4 0x03 +#define A_5 0x04 +#define A_6 0x05 +#define A_7 0x06 +#define A_8 0x07 +#define A_9 0x08 +#define A_10 0x09 +#define A_11 0x0A +#define A_12 0x0B +#define A_13 0x0C +#define A_14 0x0D +#define A_15 0x0E +#define A_16 0x0F + +#define B_1 0x10 +#define B_2 0x11 +#define B_3 0x12 +#define B_4 0x13 +#define B_5 0x14 +#define B_6 0x15 +#define B_7 0x16 +#define B_8 0x17 +#define B_9 0x18 +#define B_10 0x19 +#define B_11 0x1A +#define B_12 0x1B +#define B_13 0x1C +#define B_14 0x1D +#define B_15 0x1E +#define B_16 0x1F + +#define C_1 0x20 +#define C_2 0x21 +#define C_3 0x22 +#define C_4 0x23 +#define C_5 0x24 +#define C_6 0x25 +#define C_7 0x26 +#define C_8 0x27 +#define C_9 0x28 +#define C_10 0x29 +#define C_11 0x2A +#define C_12 0x2B +#define C_13 0x2C +#define C_14 0x2D +#define C_15 0x2E +#define C_16 0x2F + +#define D_1 0x30 +#define D_2 0x31 +#define D_3 0x32 +#define D_4 0x33 +#define D_5 0x34 +#define D_6 0x35 +#define D_7 0x36 +#define D_8 0x37 +#define D_9 0x38 +#define D_10 0x39 +#define D_11 0x3A +#define D_12 0x3B +#define D_13 0x3C +#define D_14 0x3D +#define D_15 0x3E +#define D_16 0x3F + +#define E_1 0x40 +#define E_2 0x41 +#define E_3 0x42 +#define E_4 0x43 +#define E_5 0x44 +#define E_6 0x45 +#define E_7 0x46 +#define E_8 0x47 +#define E_9 0x48 +#define E_10 0x49 +#define E_11 0x4A +#define E_12 0x4B +#define E_13 0x4C +#define E_14 0x4D +#define E_15 0x4E +#define E_16 0x4F + +#define F_1 0x50 +#define F_2 0x51 +#define F_3 0x52 +#define F_4 0x53 +#define F_5 0x54 +#define F_6 0x55 +#define F_7 0x56 +#define F_8 0x57 +#define F_9 0x58 +#define F_10 0x59 +#define F_11 0x5A +#define F_12 0x5B +#define F_13 0x5C +#define F_14 0x5D +#define F_15 0x5E +#define F_16 0x5F + +#define G_1 0x60 +#define G_2 0x61 +#define G_3 0x62 +#define G_4 0x63 +#define G_5 0x64 +#define G_6 0x65 +#define G_7 0x66 +#define G_8 0x67 +#define G_9 0x68 +#define G_10 0x69 +#define G_11 0x6A +#define G_12 0x6B +#define G_13 0x6C +#define G_14 0x6D +#define G_15 0x6E +#define G_16 0x6F + +#define H_1 0x70 +#define H_2 0x71 +#define H_3 0x72 +#define H_4 0x73 +#define H_5 0x74 +#define H_6 0x75 +#define H_7 0x76 +#define H_8 0x77 +#define H_9 0x78 +#define H_10 0x79 +#define H_11 0x7A +#define H_12 0x7B +#define H_13 0x7C +#define H_14 0x7D +#define H_15 0x7E +#define H_16 0x7F + +#define I_1 0x80 +#define I_2 0x81 +#define I_3 0x82 +#define I_4 0x83 +#define I_5 0x84 +#define I_6 0x85 +#define I_7 0x86 +#define I_8 0x87 +#define I_9 0x88 +#define I_10 0x89 +#define I_11 0x8A +#define I_12 0x8B +#define I_13 0x8C +#define I_14 0x8D +#define I_15 0x8E +#define I_16 0x8F + +#define J_1 0x90 +#define J_2 0x91 +#define J_3 0x92 +#define J_4 0x93 +#define J_5 0x94 +#define J_6 0x95 +#define J_7 0x96 +#define J_8 0x97 +#define J_9 0x98 +#define J_10 0x99 +#define J_11 0x9A +#define J_12 0x9B +#define J_13 0x9C +#define J_14 0x9D +#define J_15 0x9E +#define J_16 0x9F + +#define K_1 0xA0 +#define K_2 0xA1 +#define K_3 0xA2 +#define K_4 0xA3 +#define K_5 0xA4 +#define K_6 0xA5 +#define K_7 0xA6 +#define K_8 0xA7 +#define K_9 0xA8 +#define K_10 0xA9 +#define K_11 0xAA +#define K_12 0xAB +#define K_13 0xAC +#define K_14 0xAD +#define K_15 0xAE +#define K_16 0xAF + +#define L_1 0xB0 +#define L_2 0xB1 +#define L_3 0xB2 +#define L_4 0xB3 +#define L_5 0xB4 +#define L_6 0xB5 +#define L_7 0xB6 +#define L_8 0xB7 +#define L_9 0xB8 +#define L_10 0xB9 +#define L_11 0xBA +#define L_12 0xBB +#define L_13 0xBC +#define L_14 0xBD +#define L_15 0xBE +#define L_16 0xBF + +#endif // IS31FL3733_DRIVER_H diff --git a/drivers/issi/is31fl3736.c b/drivers/issi/is31fl3736.c new file mode 100644 index 0000000000..c5d4310971 --- /dev/null +++ b/drivers/issi/is31fl3736.c @@ -0,0 +1,306 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#ifdef __AVR__ +#include <avr/interrupt.h> +#include <avr/io.h> +#include <util/delay.h> +#else +#include "wait.h" +#endif + +#include "is31fl3736.h" +#include <string.h> +#include "i2c_master.h" +#include "progmem.h" + + + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define ISSI_ADDR_DEFAULT 0x50 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_INTERRUPTMASKREGISTER 0xF0 +#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 + +#define ISSI_PAGE_LEDCONTROL 0x00 //PG0 +#define ISSI_PAGE_PWM 0x01 //PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 //PG2 +#define ISSI_PAGE_FUNCTION 0x03 //PG3 + +#define ISSI_REG_CONFIGURATION 0x00 //PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 //PG3 +#define ISSI_REG_RESET 0x11// PG3 +#define ISSI_REG_SWPULLUP 0x0F //PG3 +#define ISSI_REG_CSPULLUP 0x10 //PG3 + +#ifndef ISSI_TIMEOUT + #define ISSI_TIMEOUT 100 +#endif + +#ifndef ISSI_PERSISTENCE + #define ISSI_PERSISTENCE 0 +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the IS31FL3736 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required = false; + +uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } }; +bool g_led_control_registers_update_required = false; + +void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data ) +{ + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + + #if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) + break; + } + #else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT); + #endif +} + +void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ) +{ + // assumes PG1 is already selected + + // transmit PWM registers in 12 transfers of 16 bytes + // g_twi_transfer_buffer[] is 20 bytes + + // iterate over the pwm_buffer contents at 16 byte intervals + for ( int i = 0; i < 192; i += 16 ) { + g_twi_transfer_buffer[0] = i; + // copy the data from i to i+15 + // device will auto-increment register for data after the first byte + // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer + for ( int j = 0; j < 16; j++ ) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + + #if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) + break; + } + #else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT); + #endif + } +} + +void IS31FL3736_init( uint8_t addr ) +{ + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + + // Unlock the command register. + IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG0 + IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); + // Turn off all LEDs. + for ( int i = 0x00; i <= 0x17; i++ ) + { + IS31FL3736_write_register( addr, i, 0x00 ); + } + + // Unlock the command register. + IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG1 + IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); + // Set PWM on all LEDs to 0 + // No need to setup Breath registers to PWM as that is the default. + for ( int i = 0x00; i <= 0xBF; i++ ) + { + IS31FL3736_write_register( addr, i, 0x00 ); + } + + // Unlock the command register. + IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + + // Select PG3 + IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION ); + // Set global current to maximum. + IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF ); + // Disable software shutdown. + IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 ); + + // Wait 10ms to ensure the device has woken up. + #ifdef __AVR__ + _delay_ms( 10 ); + #else + wait_ms(10); + #endif +} + +void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ) +{ + if ( index >= 0 && index < DRIVER_LED_TOTAL ) { + is31_led led = g_is31_leds[index]; + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required = true; + } +} + +void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue ) +{ + for ( int i = 0; i < DRIVER_LED_TOTAL; i++ ) + { + IS31FL3736_set_color( i, red, green, blue ); + } +} + +void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue ) +{ + is31_led led = g_is31_leds[index]; + + // IS31FL3733 + // The PWM register for a matrix position (0x00 to 0xBF) can be + // divided by 8 to get the LED control register (0x00 to 0x17), + // then mod 8 to get the bit position within that register. + + // IS31FL3736 + // The PWM register for a matrix position (0x00 to 0xBF) is interleaved, so: + // A1=0x00 A2=0x02 A3=0x04 A4=0x06 A5=0x08 A6=0x0A A7=0x0C A8=0x0E + // B1=0x10 B2=0x12 B3=0x14 + // But also, the LED control registers (0x00 to 0x17) are also interleaved, so: + // A1-A4=0x00 A5-A8=0x01 + // So, the same math applies. + + uint8_t control_register_r = led.r / 8; + uint8_t control_register_g = led.g / 8; + uint8_t control_register_b = led.b / 8; + + uint8_t bit_r = led.r % 8; + uint8_t bit_g = led.g % 8; + uint8_t bit_b = led.b % 8; + + if ( red ) { + g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); + } else { + g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); + } + if ( green ) { + g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); + } else { + g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); + } + if ( blue ) { + g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); + } else { + g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); + } + + g_led_control_registers_update_required = true; + +} + +void IS31FL3736_mono_set_brightness( int index, uint8_t value ) +{ + if ( index >= 0 && index < 96 ) { + // Index in range 0..95 -> A1..A8, B1..B8, etc. + // Map index 0..95 to registers 0x00..0xBE (interleaved) + uint8_t pwm_register = index * 2; + g_pwm_buffer[0][pwm_register] = value; + g_pwm_buffer_update_required = true; + } +} + +void IS31FL3736_mono_set_brightness_all( uint8_t value ) +{ + for ( int i = 0; i < 96; i++ ) + { + IS31FL3736_mono_set_brightness( i, value ); + } +} + +void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled ) +{ + // Index in range 0..95 -> A1..A8, B1..B8, etc. + + // Map index 0..95 to registers 0x00..0xBE (interleaved) + uint8_t pwm_register = index * 2; + // Map register 0x00..0xBE (interleaved) into control register and bit + uint8_t control_register = pwm_register / 8; + uint8_t bit = pwm_register % 8; + + if ( enabled ) { + g_led_control_registers[0][control_register] |= (1 << bit); + } else { + g_led_control_registers[0][control_register] &= ~(1 << bit); + } + + g_led_control_registers_update_required = true; +} + +void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_pwm_buffer_update_required ) + { + // Firstly we need to unlock the command register and select PG1 + IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM ); + + IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] ); + //IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] ); + } + g_pwm_buffer_update_required = false; +} + +void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 ) +{ + if ( g_led_control_registers_update_required ) + { + // Firstly we need to unlock the command register and select PG0 + IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 ); + IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL ); + for ( int i=0; i<24; i++ ) + { + IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] ); + //IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] ); + } + } +} + diff --git a/drivers/issi/is31fl3736.h b/drivers/issi/is31fl3736.h new file mode 100644 index 0000000000..cff50fd0d8 --- /dev/null +++ b/drivers/issi/is31fl3736.h @@ -0,0 +1,172 @@ +/* Copyright 2018 Jason Williams (Wilba) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + + +// Simple interface option. +// If these aren't defined, just define them to make it compile + + +#ifndef DRIVER_COUNT +#define DRIVER_COUNT 2 +#endif + +#ifndef DRIVER_LED_TOTAL +#define DRIVER_LED_TOTAL 96 +#endif + + +typedef struct is31_led { + uint8_t driver:2; + uint8_t r; + uint8_t g; + uint8_t b; +} __attribute__((packed)) is31_led; + +extern const is31_led g_is31_leds[DRIVER_LED_TOTAL]; + +void IS31FL3736_init( uint8_t addr ); +void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data ); +void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer ); + +void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue ); +void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); + +void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue ); + +void IS31FL3736_mono_set_brightness( int index, uint8_t value ); +void IS31FL3736_mono_set_brightness_all( uint8_t value ); +void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled ); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 ); +void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 ); + +#define A_1 0x00 +#define A_2 0x02 +#define A_3 0x04 +#define A_4 0x06 +#define A_5 0x08 +#define A_6 0x0A +#define A_7 0x0C +#define A_8 0x0E + +#define B_1 0x10 +#define B_2 0x12 +#define B_3 0x14 +#define B_4 0x16 +#define B_5 0x18 +#define B_6 0x1A +#define B_7 0x1C +#define B_8 0x1E + +#define C_1 0x20 +#define C_2 0x22 +#define C_3 0x24 +#define C_4 0x26 +#define C_5 0x28 +#define C_6 0x2A +#define C_7 0x2C +#define C_8 0x2E + +#define D_1 0x30 +#define D_2 0x32 +#define D_3 0x34 +#define D_4 0x36 +#define D_5 0x38 +#define D_6 0x3A +#define D_7 0x3C +#define D_8 0x3E + +#define E_1 0x40 +#define E_2 0x42 +#define E_3 0x44 +#define E_4 0x46 +#define E_5 0x48 +#define E_6 0x4A +#define E_7 0x4C +#define E_8 0x4E + +#define F_1 0x50 +#define F_2 0x52 +#define F_3 0x54 +#define F_4 0x56 +#define F_5 0x58 +#define F_6 0x5A +#define F_7 0x5C +#define F_8 0x5E + +#define G_1 0x60 +#define G_2 0x62 +#define G_3 0x64 +#define G_4 0x66 +#define G_5 0x68 +#define G_6 0x6A +#define G_7 0x6C +#define G_8 0x6E + +#define H_1 0x70 +#define H_2 0x72 +#define H_3 0x74 +#define H_4 0x76 +#define H_5 0x78 +#define H_6 0x7A +#define H_7 0x7C +#define H_8 0x7E + +#define I_1 0x80 +#define I_2 0x82 +#define I_3 0x84 +#define I_4 0x86 +#define I_5 0x88 +#define I_6 0x8A +#define I_7 0x8C +#define I_8 0x8E + +#define J_1 0x90 +#define J_2 0x92 +#define J_3 0x94 +#define J_4 0x96 +#define J_5 0x98 +#define J_6 0x9A +#define J_7 0x9C +#define J_8 0x9E + +#define K_1 0xA0 +#define K_2 0xA2 +#define K_3 0xA4 +#define K_4 0xA6 +#define K_5 0xA8 +#define K_6 0xAA +#define K_7 0xAC +#define K_8 0xAE + +#define L_1 0xB0 +#define L_2 0xB2 +#define L_3 0xB4 +#define L_4 0xB6 +#define L_5 0xB8 +#define L_6 0xBA +#define L_7 0xBC +#define L_8 0xBE + diff --git a/drivers/qwiic/micro_oled.c b/drivers/qwiic/micro_oled.c new file mode 100644 index 0000000000..35c5d6ee1d --- /dev/null +++ b/drivers/qwiic/micro_oled.c @@ -0,0 +1,691 @@ +/* Jim Lindblom @ SparkFun Electronics + * October 26, 2014 + * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED + * + * Modified by: + * Emil Varughese @ Edwin Robotics Pvt. Ltd. + * July 27, 2015 + * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ + * + * This code was heavily based around the MicroView library, written by GeekAmmo + * (https://github.com/geekammo/MicroView-Arduino-Library). + * + * Adapted for QMK by: + * Jack Humbert <jack.humb@gmail.com> + * October 11, 2018 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "micro_oled.h" +#include <stdlib.h> +#include "util/font5x7.h" +#include "util/font8x16.h" +#include "string.h" + +#define TOTALFONTS 2 +const unsigned char * fonts_pointer[]= { font5x7, font8x16 }; + +uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY; +uint16_t fontMapWidth; + +#define _BV(x) (1 << (x)) +#define swap(a, b) { uint8_t t = a; a = b; b = t; } + +uint8_t micro_oled_transfer_buffer[20]; +static uint8_t micro_oled_screen_current[LCDWIDTH*LCDWIDTH/8] = { 0 }; + +/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte + B B .............B ----- + y y .............y \ + t t .............t \ + e e .............e \ + 0 1 .............63 \ + \ + D0 D0.............D0 \ + D1 D1.............D1 / ROW 0 + D2 D2.............D2 / + D3 D3.............D3 / + D4 D4.............D4 / + D5 D5.............D5 / + D6 D6.............D6 / + D7 D7.............D7 ---- + */ + +#if LCDWIDTH == 64 + #if LCDWIDTH == 48 +static uint8_t micro_oled_screen_buffer[] = { +// QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php +//64x48 image +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, +0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, +0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60, +0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE, +0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, +0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF, +0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7, +0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, +0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, +0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, +0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00 +}; + #endif +#elif LCDWIDTH == 128 + #if LCDHEIGHT == 32 + static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = { +//128x32 qmk image +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC, +0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC, +0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00, +0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, +0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80, +0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, +0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, +0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03, +0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, +0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10, +0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01, +0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12, +0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12, +0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3, +0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED, +0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0, +0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C, +0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C, +0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00, +0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F, +0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F, +0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, +0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04, +0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01, +0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07, +0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00 + }; + #elif LCDHEIGHT == 64 + static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = { +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, +0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, +0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF, +0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE, +0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC, +0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00, +0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F, +0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, +0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, +0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00, +0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01, +0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70, +0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0, +0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24, +0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8, +0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04, +0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, +0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0, +0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01, +0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70, +0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18, +0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, +0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, +0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, +0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01, +0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, +0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00, +0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, +0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; +//TODO: generate bitmap of QMK logo here + #endif +#else +//catchall for custom screen szies + static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0}; +#endif + + + +void micro_oled_init(void) { + + i2c_init(); + i2c_start(I2C_ADDRESS_SA0_1); + + // Display Init sequence for 64x48 OLED module + send_command(DISPLAYOFF); // 0xAE + + send_command(SETDISPLAYCLOCKDIV); // 0xD5 + send_command(0x80); // the suggested ratio 0x80 + + send_command(SETMULTIPLEX); // 0xA8 + send_command(LCDHEIGHT - 1); + + send_command(SETDISPLAYOFFSET); // 0xD3 + send_command(0x00); // no offset + + send_command(SETSTARTLINE | 0x00); // line #0 + + send_command(CHARGEPUMP); // enable charge pump + send_command(0x14); + + send_command(NORMALDISPLAY); // 0xA6 + send_command(DISPLAYALLONRESUME); // 0xA4 + +//display at regular orientation + send_command(SEGREMAP | 0x1); + send_command(COMSCANDEC); + +//rotate display 180 +#ifdef micro_oled_rotate_180 + send_command(SEGREMAP); + send_command(COMSCANINC); +#endif + + send_command(MEMORYMODE); + send_command(0x10); + + send_command(SETCOMPINS); // 0xDA +if (LCDHEIGHT > 32) { + send_command(0x12); +} else { + send_command(0x02); +} + send_command(SETCONTRAST); // 0x81 + send_command(0x8F); + + send_command(SETPRECHARGE); // 0xd9 + send_command(0xF1); + + send_command(SETVCOMDESELECT); // 0xDB + send_command(0x40); + + send_command(DISPLAYON); //--turn on oled panel + clear_screen(); // Erase hardware memory inside the OLED controller to avoid random data in memory. + send_buffer(); +} + +void send_command(uint8_t command) { + micro_oled_transfer_buffer[0] = I2C_COMMAND; + micro_oled_transfer_buffer[1] = command; + i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); +} + +void send_data(uint8_t data) { + micro_oled_transfer_buffer[0] = I2C_DATA; + micro_oled_transfer_buffer[1] = data; + i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); +} + +/** \brief Set SSD1306 page address. + Send page address command and address to the SSD1306 OLED controller. +*/ +void set_page_address(uint8_t address) { + address = (0xB0 | address); + send_command(address); +} + +/** \brief Set SSD1306 column address. + Send column address command and address to the SSD1306 OLED controller. +*/ +void set_column_address(uint8_t address) { + send_command( ( 0x10 | (address >> 4) ) + ((128 - LCDWIDTH) >> 8) ); + send_command( 0x0F & address ); +} + +/** \brief Clear SSD1306's memory. + To clear GDRAM inside the LCD controller. +*/ +void clear_screen(void) { + for (int i=0;i<8; i++) { + set_page_address(i); + set_column_address(0); + for (int j=0; j<0x80; j++) { + send_data(0); + } + } +} + +/** \brief Clear SSD1306's memory. + To clear GDRAM inside the LCD controller. +*/ +void clear_buffer(void) { +//384 + memset(micro_oled_screen_buffer, 0, LCDWIDTH*LCDWIDTH/8); +} + +/** \brief Invert display. + The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON. +*/ +void invert_screen(bool invert) { + if (invert) { + send_command(INVERTDISPLAY); + } else { + send_command(NORMALDISPLAY); + } +} + +/** \brief Set contrast. + OLED contract value from 0 to 255. Note: Contrast level is not very obvious. +*/ +void set_contrast(uint8_t contrast) { + send_command(SETCONTRAST); // 0x81 + send_command(contrast); +} + +/** \brief Transfer display buffer. + Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time +*/ +void send_buffer(void) { + uint8_t i, j; + + uint8_t page_addr = 0xFF; + for (i = 0; i < LCDHEIGHT/8; i++) { + uint8_t col_addr = 0xFF; + for (j = 0; j < LCDWIDTH; j++) { + if (micro_oled_screen_buffer[i*LCDWIDTH+j] != micro_oled_screen_current[i*LCDWIDTH+j]) { + if (page_addr != i) { + set_page_address(i); + } + if (col_addr != j) { + set_column_address(j); + } + send_data(micro_oled_screen_buffer[i*LCDWIDTH+j]); + micro_oled_screen_current[i*LCDWIDTH+j] = micro_oled_screen_buffer[i*LCDWIDTH+j]; + col_addr = j + 1; + } + } + } +} + +/** \brief Draw pixel with color and mode. + Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode. +*/ +void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) { + if ((x<0) || (x>=LCDWIDTH) || (y<0) || (y>=LCDHEIGHT)) + return; + + if (mode == XOR) { + if (color == PIXEL_ON) + micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] ^= _BV((y%8)); + } else { + if (color == PIXEL_ON) + micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] |= _BV((y%8)); + else + micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] &= ~_BV((y%8)); + } +} + +/** \brief Draw line with color and mode. +Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer. +*/ +void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) { + uint8_t steep = abs(y1 - y0) > abs(x1 - x0); + if (steep) { + swap(x0, y0); + swap(x1, y1); + } + + if (x0 > x1) { + swap(x0, x1); + swap(y0, y1); + } + + uint8_t dx, dy; + dx = x1 - x0; + dy = abs(y1 - y0); + + int8_t err = dx / 2; + int8_t ystep; + + if (y0 < y1) { + ystep = 1; + } else { + ystep = -1;} + + for (; x0<x1; x0++) { + if (steep) { + draw_pixel(y0, x0, color, mode); + } else { + draw_pixel(x0, y0, color, mode); + } + err -= dy; + if (err < 0) { + y0 += ystep; + err += dx; + } + } +} + +/** \brief Draw horizontal line with color and mode. +Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer. +*/ +void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) { + draw_line(x,y,x+width,y,color,mode); +} + +/** \brief Draw vertical line. +Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer. +*/ +void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) { + draw_line(x,y,x,y+height,color,mode); +} + +/** \brief Draw rectangle with color and mode. +Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + uint8_t tempHeight; + + draw_line_hori(x,y, width, color, mode); + draw_line_hori(x,y+height-1, width, color, mode); + + tempHeight=height-2; + + // skip drawing vertical lines to avoid overlapping of pixel that will + // affect XOR plot if no pixel in between horizontal lines + if (tempHeight<1) return; + + draw_line_vert(x,y+1, tempHeight, color, mode); + draw_line_vert(x+width-1, y+1, tempHeight, color, mode); +} + +/** \brief Draw rectangle with color and mode. +Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + uint8_t tempHeight; + + draw_line_hori(x+1,y, width-2, color, mode); + draw_line_hori(x+1,y+height-1, width-2, color, mode); + + tempHeight=height-2; + + // skip drawing vertical lines to avoid overlapping of pixel that will + // affect XOR plot if no pixel in between horizontal lines + if (tempHeight<1) return; + + draw_line_vert(x,y+1, tempHeight, color, mode); + draw_line_vert(x+width-1, y+1, tempHeight, color, mode); +} + +/** \brief Draw filled rectangle with color and mode. +Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + // TODO - need to optimise the memory map draw so that this function will not call pixel one by one + for (int i=x; i<x+width;i++) { + draw_line_vert(i,y, height, color, mode); + } +} + +/** \brief Draw filled rectangle with color and mode. +Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. +*/ +void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { + // TODO - need to optimise the memory map draw so that this function will not call pixel one by one + for (int i=x; i<x+width;i++) { + if (i == x || i == (x + width - 1)) + draw_line_vert(i, y+1, height-2, color, mode); + else + draw_line_vert(i, y, height, color, mode); + } +} + +/** \brief Draw character with color and mode. + Draw character c using color and draw mode at x,y. +*/ +void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) { + // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels + + uint8_t rowsToDraw,row, tempC; + uint8_t i,j,temp; + uint16_t charPerBitmapRow,charColPositionOnBitmap,charRowPositionOnBitmap,charBitmapStartPosition; + + if ((font>=TOTALFONTS) || (font<0)) + return; + + uint8_t fontType = font; + uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0); + uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType]+1); + uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType]+2); + uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType]+3); + uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType]+4)*100)+pgm_read_byte(fonts_pointer[fontType]+5); // two bytes values into integer 16 + + if ((c<fontStartChar) || (c>(fontStartChar+fontTotalChar-1))) // no bitmap for the required c + return; + + tempC=c-fontStartChar; + + // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn + rowsToDraw=fontHeight/8; // 8 is LCD's page size, see SSD1306 datasheet + if (rowsToDraw<=1) rowsToDraw=1; + + // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw + if (rowsToDraw==1) { + for (i=0;i<fontWidth+1;i++) { + if (i==fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5 + temp=0; + else + temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(tempC*fontWidth)+i); + + for (j=0;j<8;j++) { // 8 is the LCD's page height (see datasheet for explanation) + if (temp & 0x1) { + draw_pixel(x+i, y+j, color,mode); + } + else { + draw_pixel(x+i, y+j, !color,mode); + } + + temp >>=1; + } + } + return; + } + + // font height over 8 bit + // take character "0" ASCII 48 as example + charPerBitmapRow = fontMapWidth/fontWidth; // 256/8 =32 char per row + charColPositionOnBitmap = tempC % charPerBitmapRow; // =16 + charRowPositionOnBitmap = (int)(tempC/charPerBitmapRow); // =1 + charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight/8)) + (charColPositionOnBitmap * fontWidth) ; + + // each row on LCD is 8 bit height (see datasheet for explanation) + for(row=0;row<rowsToDraw;row++) { + for (i=0; i<fontWidth;i++) { + temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(charBitmapStartPosition+i+(row*fontMapWidth))); + for (j=0;j<8;j++) { // 8 is the LCD's page height (see datasheet for explanation) + if (temp & 0x1) { + draw_pixel(x+i,y+j+(row*8), color, mode); + } + else { + draw_pixel(x+i,y+j+(row*8), !color, mode); + } + temp >>=1; + } + } + } + +} + +void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font) { + + if ((font>=TOTALFONTS) || (font<0)) + return; + + uint8_t fontType = font; + uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0); + + uint8_t cur_x = x; + for (int i = 0; i < strlen(string); i++) { + draw_char(cur_x, y, string[i], color, mode, font); + cur_x += fontWidth + 1; + } + +} diff --git a/drivers/qwiic/micro_oled.h b/drivers/qwiic/micro_oled.h new file mode 100644 index 0000000000..5d6a1029ed --- /dev/null +++ b/drivers/qwiic/micro_oled.h @@ -0,0 +1,134 @@ +/* Jim Lindblom @ SparkFun Electronics + * October 26, 2014 + * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED + * + * Modified by: + * Emil Varughese @ Edwin Robotics Pvt. Ltd. + * July 27, 2015 + * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ + * + * This code was heavily based around the MicroView library, written by GeekAmmo + * (https://github.com/geekammo/MicroView-Arduino-Library). + * + * Adapted for QMK by: + * Jack Humbert <jack.humb@gmail.com> + * October 11, 2018 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "qwiic.h" + +void micro_oled_init(void); + +void send_command(uint8_t command); +void send_data(uint8_t data); +void set_page_address(uint8_t address); +void set_column_address(uint8_t address); +void clear_screen(void); +void clear_buffer(void); +void send_buffer(void); +void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode); +void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode); +void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode); +void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode); +void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); +void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font); +void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font); + +#define I2C_ADDRESS_SA0_0 0b0111100 +#ifndef I2C_ADDRESS_SA0_1 +#define I2C_ADDRESS_SA0_1 0b0111101 +#endif +#define I2C_COMMAND 0x00 +#define I2C_DATA 0x40 +#define PIXEL_OFF 0 +#define PIXEL_ON 1 + +#ifndef LCDWIDTH +#define LCDWIDTH 64 +#endif +#ifndef LCDWIDTH +#define LCDHEIGHT 48 +#endif +#define FONTHEADERSIZE 6 + +#define NORM 0 +#define XOR 1 + +#define PAGE 0 +#define ALL 1 + +#define WIDGETSTYLE0 0 +#define WIDGETSTYLE1 1 +#define WIDGETSTYLE2 2 + +#define SETCONTRAST 0x81 +#define DISPLAYALLONRESUME 0xA4 +#define DISPLAYALLON 0xA5 +#define NORMALDISPLAY 0xA6 +#define INVERTDISPLAY 0xA7 +#define DISPLAYOFF 0xAE +#define DISPLAYON 0xAF +#define SETDISPLAYOFFSET 0xD3 +#define SETCOMPINS 0xDA +#define SETVCOMDESELECT 0xDB +#define SETDISPLAYCLOCKDIV 0xD5 +#define SETPRECHARGE 0xD9 +#define SETMULTIPLEX 0xA8 +#define SETLOWCOLUMN 0x00 +#define SETHIGHCOLUMN 0x10 +#define SETSTARTLINE 0x40 +#define MEMORYMODE 0x20 +#define COMSCANINC 0xC0 +#define COMSCANDEC 0xC8 +#define SEGREMAP 0xA0 +#define CHARGEPUMP 0x8D +#define EXTERNALVCC 0x01 +#define SWITCHCAPVCC 0x02 + +// Scroll +#define ACTIVATESCROLL 0x2F +#define DEACTIVATESCROLL 0x2E +#define SETVERTICALSCROLLAREA 0xA3 +#define RIGHTHORIZONTALSCROLL 0x26 +#define LEFT_HORIZONTALSCROLL 0x27 +#define VERTICALRIGHTHORIZONTALSCROLL 0x29 +#define VERTICALLEFTHORIZONTALSCROLL 0x2A + +typedef enum CMD { + CMD_CLEAR, //0 + CMD_INVERT, //1 + CMD_CONTRAST, //2 + CMD_DISPLAY, //3 + CMD_SETCURSOR, //4 + CMD_PIXEL, //5 + CMD_LINE, //6 + CMD_LINEH, //7 + CMD_LINEV, //8 + CMD_RECT, //9 + CMD_RECTFILL, //10 + CMD_CIRCLE, //11 + CMD_CIRCLEFILL, //12 + CMD_DRAWCHAR, //13 + CMD_DRAWBITMAP, //14 + CMD_GETLCDWIDTH, //15 + CMD_GETLCDHEIGHT, //16 + CMD_SETCOLOR, //17 + CMD_SETDRAWMODE //18 +} commCommand_t;
\ No newline at end of file diff --git a/drivers/qwiic/qwiic.c b/drivers/qwiic/qwiic.c new file mode 100644 index 0000000000..9047919927 --- /dev/null +++ b/drivers/qwiic/qwiic.c @@ -0,0 +1,31 @@ +/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "qwiic.h" + +void qwiic_init(void) { + #ifdef QWIIC_JOYSTIIC_ENABLE + joystiic_init(); + #endif + #ifdef QWIIC_MICRO_OLED_ENABLE + micro_oled_init(); + #endif +} + +void qwiic_task(void) { + #ifdef QWIIC_JOYSTIIC_ENABLE + joystiic_task(); + #endif +} diff --git a/drivers/qwiic/qwiic.h b/drivers/qwiic/qwiic.h new file mode 100644 index 0000000000..160fb28dfd --- /dev/null +++ b/drivers/qwiic/qwiic.h @@ -0,0 +1,28 @@ +/* Copyright 2018 Jack Humbert <jack.humb@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "i2c_master.h" + +#ifdef QWIIC_JOYSTIIC_ENABLE + #include "joystiic.h" +#endif +#ifdef QWIIC_MICRO_OLED_ENABLE + #include "micro_oled.h" +#endif + +void qwiic_init(void); +void qwiic_task(void); diff --git a/drivers/qwiic/qwiic.mk b/drivers/qwiic/qwiic.mk new file mode 100644 index 0000000000..4ae2d78e3e --- /dev/null +++ b/drivers/qwiic/qwiic.mk @@ -0,0 +1,18 @@ +ifneq ($(strip $(QWIIC_ENABLE)),) + COMMON_VPATH += $(DRIVER_PATH)/qwiic + OPT_DEFS += -DQWIIC_ENABLE + SRC += qwiic.c + ifeq ($(filter "i2c_master.c", $(SRC)),) + SRC += i2c_master.c + endif +endif + +ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),) + OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE + SRC += joystiic.c +endif + +ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),) + OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE + SRC += micro_oled.c +endif diff --git a/drivers/qwiic/util/font5x7.h b/drivers/qwiic/util/font5x7.h new file mode 100644 index 0000000000..0bad206b7c --- /dev/null +++ b/drivers/qwiic/util/font5x7.h @@ -0,0 +1,288 @@ +/****************************************************************************** +font5x7.h +Definition for small font + +This file was imported from the MicroView library, written by GeekAmmo +(https://github.com/geekammo/MicroView-Arduino-Library), and released under +the terms of the GNU General Public License as published by the Free Software +Foundation, either version 3 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. + +Modified by: +Emil Varughese @ Edwin Robotics Pvt. Ltd. +July 27, 2015 +https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ + +******************************************************************************/ +#pragma once + +#include "progmem.h" + +// Standard ASCII 5x7 font +static const unsigned char font5x7[] PROGMEM = { + // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) + 5,8,0,255,12,75, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, + 0x00, 0x18, 0x3C, 0x18, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, + 0x00, 0x18, 0x24, 0x18, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, + 0x30, 0x48, 0x3A, 0x06, 0x0E, + 0x26, 0x29, 0x79, 0x29, 0x26, + 0x40, 0x7F, 0x05, 0x05, 0x07, + 0x40, 0x7F, 0x05, 0x25, 0x3F, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, + 0x14, 0x22, 0x7F, 0x22, 0x14, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, + 0x06, 0x09, 0x7F, 0x01, 0x7F, + 0x00, 0x66, 0x89, 0x95, 0x6A, + 0x60, 0x60, 0x60, 0x60, 0x60, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, + 0x08, 0x04, 0x7E, 0x04, 0x08, + 0x10, 0x20, 0x7E, 0x20, 0x10, + 0x08, 0x08, 0x2A, 0x1C, 0x08, + 0x08, 0x1C, 0x2A, 0x08, 0x08, + 0x1E, 0x10, 0x10, 0x10, 0x10, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, + 0x30, 0x38, 0x3E, 0x38, 0x30, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, + 0x23, 0x13, 0x08, 0x64, 0x62, + 0x36, 0x49, 0x56, 0x20, 0x50, + 0x00, 0x08, 0x07, 0x03, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, + 0x08, 0x08, 0x3E, 0x08, 0x08, + 0x00, 0x80, 0x70, 0x30, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, + 0x00, 0x00, 0x60, 0x60, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, + 0x3E, 0x51, 0x49, 0x45, 0x3E, + 0x00, 0x42, 0x7F, 0x40, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, + 0x21, 0x41, 0x49, 0x4D, 0x33, + 0x18, 0x14, 0x12, 0x7F, 0x10, + 0x27, 0x45, 0x45, 0x45, 0x39, + 0x3C, 0x4A, 0x49, 0x49, 0x31, + 0x41, 0x21, 0x11, 0x09, 0x07, + 0x36, 0x49, 0x49, 0x49, 0x36, + 0x46, 0x49, 0x49, 0x29, 0x1E, + 0x00, 0x00, 0x14, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x00, 0x41, 0x22, 0x14, 0x08, + 0x02, 0x01, 0x59, 0x09, 0x06, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, + 0x7C, 0x12, 0x11, 0x12, 0x7C, + 0x7F, 0x49, 0x49, 0x49, 0x36, + 0x3E, 0x41, 0x41, 0x41, 0x22, + 0x7F, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x49, 0x49, 0x49, 0x41, + 0x7F, 0x09, 0x09, 0x09, 0x01, + 0x3E, 0x41, 0x41, 0x51, 0x73, + 0x7F, 0x08, 0x08, 0x08, 0x7F, + 0x00, 0x41, 0x7F, 0x41, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, + 0x7F, 0x08, 0x14, 0x22, 0x41, + 0x7F, 0x40, 0x40, 0x40, 0x40, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, + 0x7F, 0x04, 0x08, 0x10, 0x7F, + 0x3E, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x09, 0x09, 0x09, 0x06, + 0x3E, 0x41, 0x51, 0x21, 0x5E, + 0x7F, 0x09, 0x19, 0x29, 0x46, + 0x26, 0x49, 0x49, 0x49, 0x32, + 0x03, 0x01, 0x7F, 0x01, 0x03, + 0x3F, 0x40, 0x40, 0x40, 0x3F, + 0x1F, 0x20, 0x40, 0x20, 0x1F, + 0x3F, 0x40, 0x38, 0x40, 0x3F, + 0x63, 0x14, 0x08, 0x14, 0x63, + 0x03, 0x04, 0x78, 0x04, 0x03, + 0x61, 0x59, 0x49, 0x4D, 0x43, + 0x00, 0x7F, 0x41, 0x41, 0x41, + 0x02, 0x04, 0x08, 0x10, 0x20, + 0x00, 0x41, 0x41, 0x41, 0x7F, + 0x04, 0x02, 0x01, 0x02, 0x04, + 0x40, 0x40, 0x40, 0x40, 0x40, + 0x00, 0x03, 0x07, 0x08, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, + 0x7F, 0x28, 0x44, 0x44, 0x38, + 0x38, 0x44, 0x44, 0x44, 0x28, + 0x38, 0x44, 0x44, 0x28, 0x7F, + 0x38, 0x54, 0x54, 0x54, 0x18, + 0x00, 0x08, 0x7E, 0x09, 0x02, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, + 0x7F, 0x08, 0x04, 0x04, 0x78, + 0x00, 0x44, 0x7D, 0x40, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, + 0x7C, 0x08, 0x04, 0x04, 0x78, + 0x38, 0x44, 0x44, 0x44, 0x38, + 0xFC, 0x18, 0x24, 0x24, 0x18, + 0x18, 0x24, 0x24, 0x18, 0xFC, + 0x7C, 0x08, 0x04, 0x04, 0x08, + 0x48, 0x54, 0x54, 0x54, 0x24, + 0x04, 0x04, 0x3F, 0x44, 0x24, + 0x3C, 0x40, 0x40, 0x20, 0x7C, + 0x1C, 0x20, 0x40, 0x20, 0x1C, + 0x3C, 0x40, 0x30, 0x40, 0x3C, + 0x44, 0x28, 0x10, 0x28, 0x44, + 0x4C, 0x90, 0x90, 0x90, 0x7C, + 0x44, 0x64, 0x54, 0x4C, 0x44, + 0x00, 0x08, 0x36, 0x41, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, + 0x3C, 0x26, 0x23, 0x26, 0x3C, + 0x1E, 0xA1, 0xA1, 0x61, 0x12, + 0x3A, 0x40, 0x40, 0x20, 0x7A, + 0x38, 0x54, 0x54, 0x55, 0x59, + 0x21, 0x55, 0x55, 0x79, 0x41, + 0x21, 0x54, 0x54, 0x78, 0x41, + 0x21, 0x55, 0x54, 0x78, 0x40, + 0x20, 0x54, 0x55, 0x79, 0x40, + 0x0C, 0x1E, 0x52, 0x72, 0x12, + 0x39, 0x55, 0x55, 0x55, 0x59, + 0x39, 0x54, 0x54, 0x54, 0x59, + 0x39, 0x55, 0x54, 0x54, 0x58, + 0x00, 0x00, 0x45, 0x7C, 0x41, + 0x00, 0x02, 0x45, 0x7D, 0x42, + 0x00, 0x01, 0x45, 0x7C, 0x40, + 0xF0, 0x29, 0x24, 0x29, 0xF0, + 0xF0, 0x28, 0x25, 0x28, 0xF0, + 0x7C, 0x54, 0x55, 0x45, 0x00, + 0x20, 0x54, 0x54, 0x7C, 0x54, + 0x7C, 0x0A, 0x09, 0x7F, 0x49, + 0x32, 0x49, 0x49, 0x49, 0x32, + 0x32, 0x48, 0x48, 0x48, 0x32, + 0x32, 0x4A, 0x48, 0x48, 0x30, + 0x3A, 0x41, 0x41, 0x21, 0x7A, + 0x3A, 0x42, 0x40, 0x20, 0x78, + 0x00, 0x9D, 0xA0, 0xA0, 0x7D, + 0x39, 0x44, 0x44, 0x44, 0x39, + 0x3D, 0x40, 0x40, 0x40, 0x3D, + 0x3C, 0x24, 0xFF, 0x24, 0x24, + 0x48, 0x7E, 0x49, 0x43, 0x66, + 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, + 0xFF, 0x09, 0x29, 0xF6, 0x20, + 0xC0, 0x88, 0x7E, 0x09, 0x03, + 0x20, 0x54, 0x54, 0x79, 0x41, + 0x00, 0x00, 0x44, 0x7D, 0x41, + 0x30, 0x48, 0x48, 0x4A, 0x32, + 0x38, 0x40, 0x40, 0x22, 0x7A, + 0x00, 0x7A, 0x0A, 0x0A, 0x72, + 0x7D, 0x0D, 0x19, 0x31, 0x7D, + 0x26, 0x29, 0x29, 0x2F, 0x28, + 0x26, 0x29, 0x29, 0x29, 0x26, + 0x30, 0x48, 0x4D, 0x40, 0x20, + 0x38, 0x08, 0x08, 0x08, 0x08, + 0x08, 0x08, 0x08, 0x08, 0x38, + 0x2F, 0x10, 0xC8, 0xAC, 0xBA, + 0x2F, 0x10, 0x28, 0x34, 0xFA, + 0x00, 0x00, 0x7B, 0x00, 0x00, + 0x08, 0x14, 0x2A, 0x14, 0x22, + 0x22, 0x14, 0x2A, 0x14, 0x08, + 0xAA, 0x00, 0x55, 0x00, 0xAA, + 0xAA, 0x55, 0xAA, 0x55, 0xAA, + 0x00, 0x00, 0x00, 0xFF, 0x00, + 0x10, 0x10, 0x10, 0xFF, 0x00, + 0x14, 0x14, 0x14, 0xFF, 0x00, + 0x10, 0x10, 0xFF, 0x00, 0xFF, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x14, 0x14, 0x14, 0xFC, 0x00, + 0x14, 0x14, 0xF7, 0x00, 0xFF, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x14, 0x14, 0xF4, 0x04, 0xFC, + 0x14, 0x14, 0x17, 0x10, 0x1F, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0x1F, 0x00, + 0x10, 0x10, 0x10, 0xF0, 0x00, + 0x00, 0x00, 0x00, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0xF0, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x10, + 0x10, 0x10, 0x10, 0x10, 0x10, + 0x10, 0x10, 0x10, 0xFF, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x14, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x00, 0x00, 0x1F, 0x10, 0x17, + 0x00, 0x00, 0xFC, 0x04, 0xF4, + 0x14, 0x14, 0x17, 0x10, 0x17, + 0x14, 0x14, 0xF4, 0x04, 0xF4, + 0x00, 0x00, 0xFF, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0xF7, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x17, 0x14, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0xF4, 0x14, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x00, 0x00, 0x1F, 0x10, 0x1F, + 0x00, 0x00, 0x00, 0x1F, 0x14, + 0x00, 0x00, 0x00, 0xFC, 0x14, + 0x00, 0x00, 0xF0, 0x10, 0xF0, + 0x10, 0x10, 0xFF, 0x10, 0xFF, + 0x14, 0x14, 0x14, 0xFF, 0x14, + 0x10, 0x10, 0x10, 0x1F, 0x00, + 0x00, 0x00, 0x00, 0xF0, 0x10, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x38, 0x44, 0x44, 0x38, 0x44, + 0x7C, 0x2A, 0x2A, 0x3E, 0x14, + 0x7E, 0x02, 0x02, 0x06, 0x06, + 0x02, 0x7E, 0x02, 0x7E, 0x02, + 0x63, 0x55, 0x49, 0x41, 0x63, + 0x38, 0x44, 0x44, 0x3C, 0x04, + 0x40, 0x7E, 0x20, 0x1E, 0x20, + 0x06, 0x02, 0x7E, 0x02, 0x02, + 0x99, 0xA5, 0xE7, 0xA5, 0x99, + 0x1C, 0x2A, 0x49, 0x2A, 0x1C, + 0x4C, 0x72, 0x01, 0x72, 0x4C, + 0x30, 0x4A, 0x4D, 0x4D, 0x30, + 0x30, 0x48, 0x78, 0x48, 0x30, + 0xBC, 0x62, 0x5A, 0x46, 0x3D, + 0x3E, 0x49, 0x49, 0x49, 0x00, + 0x7E, 0x01, 0x01, 0x01, 0x7E, + 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, + 0x44, 0x44, 0x5F, 0x44, 0x44, + 0x40, 0x51, 0x4A, 0x44, 0x40, + 0x40, 0x44, 0x4A, 0x51, 0x40, + 0x00, 0x00, 0xFF, 0x01, 0x03, + 0xE0, 0x80, 0xFF, 0x00, 0x00, + 0x08, 0x08, 0x6B, 0x6B, 0x08, + 0x36, 0x12, 0x36, 0x24, 0x36, + 0x06, 0x0F, 0x09, 0x0F, 0x06, + 0x00, 0x00, 0x18, 0x18, 0x00, + 0x00, 0x00, 0x10, 0x10, 0x00, + 0x30, 0x40, 0xFF, 0x01, 0x01, + 0x00, 0x1F, 0x01, 0x01, 0x1E, + 0x00, 0x19, 0x1D, 0x17, 0x12, + 0x00, 0x3C, 0x3C, 0x3C, 0x3C, + 0x00, 0x00, 0x00, 0x00, 0x00 +}; diff --git a/drivers/qwiic/util/font8x16.h b/drivers/qwiic/util/font8x16.h new file mode 100644 index 0000000000..c070e4ec8c --- /dev/null +++ b/drivers/qwiic/util/font8x16.h @@ -0,0 +1,127 @@ +/****************************************************************************** +font8x16.h +Definition for medium font + +This file was imported from the MicroView library, written by GeekAmmo +(https://github.com/geekammo/MicroView-Arduino-Library), and released under +the terms of the GNU General Public License as published by the Free Software +Foundation, either version 3 of the License, or (at your option) any later +version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. + +Modified by: +Emil Varughese @ Edwin Robotics Pvt. Ltd. +July 27, 2015 +https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ +******************************************************************************/ +#pragma once + +#include "progmem.h" + +static const unsigned char font8x16[] PROGMEM = { + // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) + 8,16,32,96,2,56, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00, + 0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00, + 0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00, + 0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00, + 0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, + 0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00, + 0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, + 0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00, + 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, + 0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00, + 0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, + 0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00, + 0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, + 0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, + 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00, + 0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00, + 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00, + 0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, + 0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, + 0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00, + 0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, + 0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00, + 0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00, + 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00, + 0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, + 0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00, + 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00, + 0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, + 0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, + 0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, + 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, + 0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00, + 0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, + 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00, + 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00, + 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00, + 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, + 0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00, + 0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, + 0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00, + 0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, + 0x00, 0x10, 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00, + 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, + 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, + 0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, + 0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00, + 0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00, + 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; |