diff options
| -rw-r--r-- | docs/config_options.md | 2 | ||||
| -rw-r--r-- | docs/feature_backlight.md | 15 | ||||
| -rw-r--r-- | quantum/quantum.c | 48 |
3 files changed, 38 insertions, 27 deletions
diff --git a/docs/config_options.md b/docs/config_options.md index f4035809a7..55d25d4c88 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -76,7 +76,7 @@ This is a C header file that is one of the first things included, and will persi * `#define B7_AUDIO` * enables audio on pin B7 (duophony is enables if one of B[5-7]\_AUDIO is enabled along with one of C[4-6]\_AUDIO) * `#define BACKLIGHT_PIN B7` - * pin of the backlight - B5, B6, B7 use PWM, others use softPWM + * pin of the backlight - `B5`, `B6`, `B7` and `C6` (and `D4` on ATmega32A) use hardware PWM, others use software implementation * `#define BACKLIGHT_LEVELS 3` * number of levels your backlight will have (maximum 15 excluding off) * `#define BACKLIGHT_BREATHING` diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 048d75390d..5a21a67901 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -34,13 +34,14 @@ Hardware PWM is only supported on certain pins of the MCU, so if the backlightin Hardware PWM is supported according to the following table: -| Backlight Pin | Hardware timer | -|---------------|----------------| -|`B5` | Timer 1 | -|`B6` | Timer 1 | -|`B7` | Timer 1 | -|`C6` | Timer 3 | -| other | Software PWM | +| Backlight Pin | Hardware timer | +|---------------|-------------------------| +|`B5` | Timer 1 | +|`B6` | Timer 1 | +|`B7` | Timer 1 | +|`C6` | Timer 3 | +|`D4` | Timer 1 (ATmega32A only)| +| other | Software PWM | The [audio feature](feature_audio.md) also uses hardware timers. Please refer to the following table to know what hardware timer the software PWM will use depending on the audio configuration: diff --git a/quantum/quantum.c b/quantum/quantum.c index 23263b7007..36b7942d5d 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -1027,35 +1027,49 @@ void matrix_scan_quantum() { # define TCCRxB TCCR1B # define COMxx1 COM1C1 # define OCRxx OCR1C +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B6 # define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == B5 # define HARDWARE_PWM # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1A1 # define OCRxx OCR1A +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 +# define TIMSKx TIMSK1 #elif BACKLIGHT_PIN == C6 # define HARDWARE_PWM # define TCCRxA TCCR3A # define TCCRxB TCCR3B -# define COMxx1 COM1A1 +# define COMxx1 COM3A1 # define OCRxx OCR3A +# define TIMERx_OVF_vect TIMER3_OVF_vect +# define TOIEx TOIE3 # define ICRx ICR3 +# define TIMSKx TIMSK3 #elif defined(__AVR_ATmega32A__) && BACKLIGHT_PIN == D4 # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define COMxx1 COM1B1 # define OCRxx OCR1B +# define TIMERx_OVF_vect TIMER1_OVF_vect +# define TOIEx TOIE1 # define ICRx ICR1 -# define TIMSK1 TIMSK +# define TIMSKx TIMSK1 #else # if !defined(BACKLIGHT_CUSTOM_DRIVER) # if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO) @@ -1066,15 +1080,15 @@ void matrix_scan_quantum() { # define TCCRxA TCCR1A # define TCCRxB TCCR1B # define OCRxx OCR1A -# define OCRxAH OCR1AH -# define OCRxAL OCR1AL # define TIMERx_COMPA_vect TIMER1_COMPA_vect # define TIMERx_OVF_vect TIMER1_OVF_vect # define OCIExA OCIE1A # define TOIEx TOIE1 # define ICRx ICR1 -# ifndef TIMSK -# define TIMSK TIMSK1 +# if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register +# define TIMSKx TIMSK +# else +# define TIMSKx TIMSK1 # endif # elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO) #pragma message "Using hardware timer 3 with software PWM" @@ -1084,16 +1098,12 @@ void matrix_scan_quantum() { # define TCCRxA TCCR3A # define TCCRxB TCCR3B # define OCRxx OCR3A -# define OCRxAH OCR3AH -# define OCRxAL OCR3AL # define TIMERx_COMPA_vect TIMER3_COMPA_vect # define TIMERx_OVF_vect TIMER3_OVF_vect # define OCIExA OCIE3A # define TOIEx TOIE3 # define ICRx ICR1 -# ifndef TIMSK -# define TIMSK TIMSK3 -# endif +# define TIMSKx TIMSK3 # else #pragma message "Audio in use - using pure software PWM" #define NO_HARDWARE_PWM @@ -1274,8 +1284,8 @@ void backlight_set(uint8_t level) { if (level == 0) { #ifdef BACKLIGHT_PWM_TIMER if (OCRxx) { - TIMSK &= ~(_BV(OCIExA)); - TIMSK &= ~(_BV(TOIEx)); + TIMSKx &= ~(_BV(OCIExA)); + TIMSKx &= ~(_BV(TOIEx)); FOR_EACH_LED( backlight_off(backlight_pin); ) @@ -1287,8 +1297,8 @@ void backlight_set(uint8_t level) { } else { #ifdef BACKLIGHT_PWM_TIMER if (!OCRxx) { - TIMSK |= _BV(OCIExA); - TIMSK |= _BV(TOIEx); + TIMSKx |= _BV(OCIExA); + TIMSKx |= _BV(TOIEx); } #else // Turn on PWM control of backlight pin @@ -1325,11 +1335,11 @@ bool is_breathing(void) { #else bool is_breathing(void) { - return !!(TIMSK1 & _BV(TOIE1)); + return !!(TIMSKx & _BV(TOIEx)); } -#define breathing_interrupt_enable() do {TIMSK1 |= _BV(TOIE1);} while (0) -#define breathing_interrupt_disable() do {TIMSK1 &= ~_BV(TOIE1);} while (0) +#define breathing_interrupt_enable() do {TIMSKx |= _BV(TOIEx);} while (0) +#define breathing_interrupt_disable() do {TIMSKx &= ~_BV(TOIEx);} while (0) #endif #define breathing_min() do {breathing_counter = 0;} while (0) @@ -1411,7 +1421,7 @@ void breathing_task(void) /* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run * about 244 times per second. */ -ISR(TIMER1_OVF_vect) +ISR(TIMERx_OVF_vect) #endif { uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS; |