Merge pull request #660 from toneman77/amj60

new keyboard: AMJ60

10 files changed, 650 insertions, 0 deletions

diff --git a/keyboards/amj60/Makefile b/keyboards/amj60/Makefile
new file mode 100644
index 0000000000..1f695aa4d8
--- /dev/null
+++ b/keyboards/amj60/Makefile
@@ -0,0 +1,70 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= yes # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      ?= no  # MIDI controls
+AUDIO_ENABLE     ?= no
+UNICODE_ENABLE   ?= no  # Unicode
+BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
diff --git a/keyboards/amj60/amj60.c b/keyboards/amj60/amj60.c
new file mode 100644
index 0000000000..993a5917db
--- /dev/null
+++ b/keyboards/amj60/amj60.c
@@ -0,0 +1,30 @@
+#include "amj60.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB &= ~(1<<2);
+    } else {
+        // Turn capslock off
+        PORTB |= (1<<2);
+    }
+}
diff --git a/keyboards/amj60/amj60.h b/keyboards/amj60/amj60.h
new file mode 100644
index 0000000000..a0cb473310
--- /dev/null
+++ b/keyboards/amj60/amj60.h
@@ -0,0 +1,153 @@
+#ifndef AMJ60_H
+#define AMJ60_H
+
+#include "quantum.h"
+
+// readability  
+#define XXX KC_NO
+
+/* AMJ60 layout to the best of my knowledge matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49|
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|  3c | 3d |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49,\
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+}
+
+/* 
+   * ANSI
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c|   0d  |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d    |
+   * |-----------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|   3d     |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ANSI( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+
+/* AMJ60 HHKB matrix layout
+   * ,------------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
+   * |------------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d  |
+   * |------------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b|   2d   |
+   * |------------------------------------------------------------|
+   * | 30     | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d   | 3c |
+   * |------------------------------------------------------------|
+   * | 40 | 41 | 42 |        45              | 4a | 4b | 4c | 4d  |
+   * `------------------------------------------------------------'
+ */
+
+#define KEYMAP_HHKB( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,      k2d, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d}, \
+    {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d}  \
+}
+
+/* ISO 
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b|   3d     |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+/* ISO w/ split right shift key matrix layout
+   * ,-----------------------------------------------------------.
+   * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |
+   * |-----------------------------------------------------------|
+   * | 10  | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c|  1d |
+   * |-----------------------------------------------------------|
+   * | 20    | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+   * |-----------------------------------------------------------|
+   * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d  | 3c |
+   * |-----------------------------------------------------------|
+   * | 40 | 41 | 42 |        45             | 4a | 4b | 4c | 4d  |
+   * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO_SPLITRSHIFT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+    k40, k41, k42,           k45,                     k4a, k4b, k4c, k4d  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif
diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h
new file mode 100644
index 0000000000..d98e0e9f2f
--- /dev/null
+++ b/keyboards/amj60/config.h
@@ -0,0 +1,94 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6066
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Han Chen
+#define PRODUCT         AMJ60
+#define DESCRIPTION     qmk port of AMJ60 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, D5}
+#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3}
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/Makefile b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
new file mode 100644
index 0000000000..2969ed8aec
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/Makefile
@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/build.sh b/keyboards/amj60/keymaps/iso_split_rshift/build.sh
new file mode 100755
index 0000000000..6b4b4568f5
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/build.sh
@@ -0,0 +1,42 @@
+#!/bin/bash
+# adjust for cpu 
+# -j 16 gave best result on a hyperthreaded quad core core i7
+
+LIMIT=10
+THREADS="-j 16"
+KMAP=iso_split_rshift
+
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+
+function wait_bootloader {
+	echo "Waiting for Bootloader..."
+	local STARTTIME=$(date +"%s")
+	local REMIND=0
+    local EXEC=dfu-programmer
+    local TARGET=atmega32u4
+	while true
+	do
+		sudo $EXEC $TARGET get > /dev/null 2>&1
+		[ $? -eq 0 ] && break
+		ENDTIME=$(date +"%s")
+		DURATION=$(($ENDTIME-$STARTTIME))
+		if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ]
+		then 
+			echo "Did you forget to press the reset button?"
+			REMIND=1
+		fi
+        sleep 1
+	done
+}
+make clean
+make KEYMAP=${KMAP} ${THREADS}
+if [[ $? -eq 0 ]]
+then
+    echo "please trigger flashing!"
+    wait_bootloader
+    sudo make KEYMAP=${KMAP} dfu ${THREADS}
+else
+    echo "make failed"
+    exit 77
+fi
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/keymap.c b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c
new file mode 100644
index 0000000000..60fb0bfb0b
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/keymap.c
@@ -0,0 +1,147 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "amj60.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DEF 0
+#define _SPC 1
+#define _TAB 2
+#define _SFX 3
+
+// dual-role shortcuts
+#define TABDUAL   LT(_TAB, KC_TAB)
+#define CAPSDUAL  CTL_T(KC_ESC)
+#define SPACEDUAL LT(_SPC, KC_SPACE)
+#define ENTERDUAL CTL_T(KC_ENT)
+// arrow cluster duality bottom right corner
+#define ARRLEFT  ALT_T(KC_LEFT)
+#define ARRDOWN  GUI_T(KC_DOWN)
+#define ARRUP    SFT_T(KC_UP)
+#define ARRRIGHT CTL_T(KC_RIGHT)
+// german brackets
+#define GER_CUR_L RALT(KC_7)    // [
+#define GER_CUR_R RALT(KC_0)    // ]
+#define GER_PAR_L LSFT(KC_8)    // (
+#define GER_PAR_R LSFT(KC_9)    // )
+#define GER_ANG_L KC_NUBS       // <
+#define GER_ANG_R LSFT(KC_NUBS) // >
+#define GER_BRC_L RALT(KC_8)    // [
+#define GER_BRC_R RALT(KC_9)    // ]
+
+// increase readability 
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Keymap _DEF: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Grv|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   \ | Tab is Fn1
+     * |-----------------------------------------------------------|
+     * |Ctrl   | A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
+     * |-----------------------------------------------------------|
+     * |Sft | < |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn2| RShift is UP
+     * |-----------------------------------------------------------|
+     * |Ctrl|Win |Alt |      Space/Fn0         |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is 
+     * `-----------------------------------------------------------'   LEFT DWN RIGHT
+     */
+    [_DEF] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_GRV,   KC_1,    KC_2,    KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSPC,   \
+        TABDUAL,  KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,   \
+        CAPSDUAL, KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,  ENTERDUAL, \
+        KC_LSFT,  KC_NUBS, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, ARRUP,    TG(_SFX),  \
+        KC_LCTL,  KC_LGUI, KC_LALT,             SPACEDUAL,                       KC_RALT, ARRLEFT, ARRDOWN,  ARRRIGHT),
+
+    /* Keymap 1: F-and-vim Layer, modified with Space (by holding space)
+     * ,-----------------------------------------------------------.
+     * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
+     * |-----------------------------------------------------------|
+     * |    |Paus| Up| [ | ] |   |   |   | ( | ) |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |Lft|Dwn|Rgt|   |   |Left|Down|Right|Up|  |   | PLAY |
+     * |-----------------------------------------------------------|
+     * |    |   |   |   | < | > |   |M0 |   |   |   |   | Vol+ |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Prev|Vol-|Next|
+     * `-----------------------------------------------------------'
+     */
+    [_SPC] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_PSCR, KC_F1,   KC_F2,   KC_F3,     KC_F4,     KC_F5,     KC_F6,    KC_F7,     KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+        _______, KC_PAUS, KC_UP,   GER_BRC_L, GER_BRC_R, _______,   _______,  GER_PAR_L, GER_PAR_R, _______, _______, _______, _______, _______, \
+        _______, KC_LEFT, KC_DOWN, KC_RIGHT,  _______,   _______,   KC_LEFT,  KC_DOWN,   KC_UP,     KC_RGHT, _______, _______, _______, KC_MPLY, \
+        _______, _______, _______, _______,   GER_ANG_L, GER_ANG_R, KC_SPACE, M(0),      _______,   _______, _______, _______, KC_VOLU, _______, \
+        _______, _______, _______,                                  _______,                                 _______, KC_MPRV, KC_VOLD, KC_MNXT),
+
+    /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (by holding tab)
+     * ,-----------------------------------------------------------.
+     * |WAKE|   |   |   |   |   |   |   |   |   |   |   |   |Insert|  TAB+GRC = WAKE
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   |   | { | } |   |   |   |     |
+     * |-----------------------------------------------------------|
+     * |      |   |   |   |   |   |Pos1|PgDn|PgUp|End|  |   |Retrn |
+     * |-----------------------------------------------------------|
+     * |    |   |   |   |   |   |   |AF2|   |   |   |   | PgUp |   |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |Alt |Pos1|PgDn|End |
+     * `-----------------------------------------------------------'
+     */
+    [_TAB] = KEYMAP_ISO_SPLITRSHIFT(
+        KC_WAKE, _______, _______, _______, _______, _______, _______, _______,    _______,  _______, _______, _______, _______, KC_INS,  \
+        _______, _______, _______, _______, _______, _______, _______, GER_CUR_L, GER_CUR_R, _______, _______, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN,    KC_PGUP,  KC_END,  _______, _______, _______, KC_ENT,  \
+        _______, _______, _______, _______, _______, _______, _______, M(1),       _______,  _______, _______, _______, KC_PGUP, _______, \
+        _______, _______, _______,                            _______,                                _______, KC_HOME, KC_PGDN, KC_END),
+
+    /* Keymap 3: Split right shift Numpad toggle Layer (by tapping the split rshift key)
+     * ,-----------------------------------------------------------.
+     * |RSET|  |   |   |   |   |   |  7|  8|  9|   |   |   |Backsp |
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   | 4 | 5 | 6 |   |   |   |   \ |
+     * |-----------------------------------------------------------|
+     * |      | L | L |   |   |   |   | 1 | 2 | 3 |   |   | Return |
+     * |-----------------------------------------------------------|
+     * |    |   | L | L | L | L | L | L |   | 0 |   |  /|  Up  |   | All "L"s represent
+     * |-----------------------------------------------------------| LED controlling
+     * |Ctrl|Win |Alt |                        |Alt |Left|Down|Right|
+     * `-----------------------------------------------------------'
+     */
+    [_SFX] = KEYMAP_ISO_SPLITRSHIFT(
+        RESET,   _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9, _______, _______, _______, KC_BSPC, \
+        _______, _______, _______, _______, _______, _______, _______, KC_4,    KC_5,    KC_6, _______, _______, _______, KC_BSLS, \
+        _______, F(2),    F(3),    _______, _______, _______, _______, KC_1,    KC_2,    KC_3, _______, _______, XXXXXXX, KC_ENT,  \
+        _______, F(4),    F(5),    F(6),    F(7),    F(8),    F(9),    _______, _______, KC_0, _______, KC_SLSH, KC_UP,   _______, \
+        _______, _______, _______,                            _______,                         _______, KC_LEFT, KC_DOWN, KC_RGHT),
+};
+
+enum function_id {
+    LAUNCH,
+    RGBLED_TOGGLE,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1]  = ACTION_FUNCTION(LAUNCH),
+    [10] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    // MACRODOWN only works in this function
+    switch(id) {
+        case 0:
+            return (record->event.pressed ? 
+                    MACRO( D(RALT), T(SPC), U(RALT), END )
+                    :MACRO( END ));
+            break;
+        case 1:
+            return (record->event.pressed ? 
+                    MACRO( D(LALT), T(F2), U(LALT), END )
+                    :MACRO( END ));
+            break;
+    }
+    return MACRO_NONE;
+};
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/readme.md b/keyboards/amj60/keymaps/iso_split_rshift/readme.md
new file mode 100644
index 0000000000..2113d93e4d
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/readme.md
@@ -0,0 +1,30 @@
+toneman77's custom spacefn Layout
+=====================
+
+##Quantum MK Firmware
+For the full Quantum feature list, see the parent readme.md.
+
+# Features
+* heavily modified ISO (!) layout with split right shift key
+* spaceFn
+* Dual-Role keys:
+* 
+ | Original key     | when tapped   | when held     |
+ | ---------------- | ------------- | ------------- |
+ | Space            | Space         | layer change  |
+ | Caps lock        | Escape        | Control       |
+ | Tab              | Tab           | layer change  |
+ | Enter            | Enter         | Control       |
+
+* vim-style arrow keys on hjkl (spacefn layer)
+* corresponding Home/PgDn/PgUp/End on hjkl (tab layer)
+* bonus arrow keys in the bottom right corner on Alt/Win/Menu/rCtrl/Shift
+* more bonus arrow keys on wasd (spacefn layer)
+* media keys prev/next/play/vol+/vol- (spacefn layer)
+* firmware bootloader button
+* additional brackets that only work in german layout due to horrible placement
+in the default qwertz layout
+
+
+### Additional Credits
+* visualization of the layers [here](http://www.keyboard-layout-editor.com/#/gists/aba4e4396459ede85bc66a22cee88e48) (without the LED keys)
diff --git a/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh
new file mode 100755
index 0000000000..da5457e195
--- /dev/null
+++ b/keyboards/amj60/keymaps/iso_split_rshift/updatemerge.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+git checkout amj60      # gets you on branch amj60
+git fetch origin        # gets you up to date with origin
+git merge origin/master
diff --git a/keyboards/amj60/readme.md b/keyboards/amj60/readme.md
new file mode 100644
index 0000000000..0896134e0c
--- /dev/null
+++ b/keyboards/amj60/readme.md
@@ -0,0 +1,57 @@
+AMJ60 keyboard firmware
+======================
+DIY/Assembled compact 60% keyboard.
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/amj60
+folder. Once your dev env is setup, you'll be able to type `make` to generate
+your .hex - you can then use `make dfu` to program your PCB once you hit the
+reset button. 
+
+Depending on which keymap you would like to use, you will have to compile
+slightly differently.
+
+### Default
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to
+define your favorite layout yourself. To define your own keymap create file
+named `<name>.c` in the keymaps folder, and see keymap document (you can find
+in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with
+`KEYMAP` option like:
+``
+$ make KEYMAP=[default|jack|<name>]
+``
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps`
+folder.
+
+## Variations
+KEYMAP macros for the following layouts are available:
+
+* default, for all the available, possible keys
+* ANSI, for 60% ANSI keyboard
+* ISO
+* ISO w/ split right shift key
+* HHKB
+
+Remark: all but "ISO w/ split right shift key" are untested and were done to the best of my knowledge.
+
+### Original tmk firmware
+The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ60).
+
+## Further information
+Since information and documentation for this board are sparse, (at least for non-chinese speaking ppl) here is everything that could be found
+
+* [geekhack discussion](https://geekhack.org/index.php?topic=53070.0)
+* [chinese discussion](https://www.v2ex.com/t/161887)
+* Board has [dedicated pinouts](https://i.imgur.com/D0sWhyh.jpg?1) for a bluetooth module
+* has pins for external power [picture](https://i.imgur.com/00VrtIp.jpg?1).
+* most information comes from [reddit](https://www.reddit.com/r/MechanicalKeyboards/comments/32oonr/gh60_pcb_for_your_custom_keyboard/)