moves backlight functionality to keyboard files and updates template makefile

previously there were two backlight.c files (bad)

4 files changed, 65 insertions, 68 deletions

diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile
index 1d91c34b7f..c1a0a6db42 100644
--- a/keyboard/atomic/Makefile
+++ b/keyboard/atomic/Makefile
@@ -171,10 +171,6 @@ endif
 
 endif
 
-ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
-	SRC := backlight.c $(SRC)
-endif
-
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
 
diff --git a/keyboard/atomic/atomic.c b/keyboard/atomic/atomic.c
index 5e31264e68..3996497161 100644
--- a/keyboard/atomic/atomic.c
+++ b/keyboard/atomic/atomic.c
@@ -57,3 +57,64 @@ void led_set_kb(uint8_t usb_led) {
 
 	led_set_user(usb_led);
 }
+
+#ifdef BACKLIGHT_ENABLE
+#define CHANNEL OCR1C
+
+void backlight_init_ports()
+{
+
+    // Setup PB7 as output and output low.
+    DDRB |= (1<<7);
+    PORTB &= ~(1<<7);
+    
+    // Use full 16-bit resolution. 
+    ICR1 = 0xFFFF;
+
+    // I could write a wall of text here to explain... but TL;DW
+    // Go read the ATmega32u4 datasheet.
+    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+    
+    // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // (i.e. start high, go low when counter matches.)
+    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+    
+    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+
+    backlight_init();
+}
+
+void backlight_set(uint8_t level)
+{
+    if ( level == 0 )
+    {
+        // Turn off PWM control on PB7, revert to output low.
+        TCCR1A &= ~(_BV(COM1C1));
+        CHANNEL = 0x0;
+        // Prevent backlight blink on lowest level
+        PORTB &= ~(_BV(PORTB7));
+    }
+    else if ( level == BACKLIGHT_LEVELS )
+    {
+        // Prevent backlight blink on lowest level
+        PORTB &= ~(_BV(PORTB7));
+        // Turn on PWM control of PB7
+        TCCR1A |= _BV(COM1C1);
+        // Set the brightness
+        CHANNEL = 0xFFFF;
+    }
+    else        
+    {
+        // Prevent backlight blink on lowest level
+        PORTB &= ~(_BV(PORTB7));
+        // Turn on PWM control of PB7
+        TCCR1A |= _BV(COM1C1);
+        // Set the brightness
+        CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
+    }
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboard/atomic/atomic.h b/keyboard/atomic/atomic.h
index d5461e424d..0c7aeb1cc8 100644
--- a/keyboard/atomic/atomic.h
+++ b/keyboard/atomic/atomic.h
@@ -3,8 +3,11 @@
 
 #include "matrix.h"
 #include "keymap_common.h"
-#include "backlight.h"
+#ifdef BACKLIGHT_ENABLE
+    #include "backlight.h"
+#endif
 #include <stddef.h>
+#include <avr/io.h>
 
 // This a shortcut to help you visually see your layout.
 // The following is an example using the Planck MIT layout
diff --git a/keyboard/atomic/backlight.c b/keyboard/atomic/backlight.c
deleted file mode 100644
index 647b57e718..0000000000
--- a/keyboard/atomic/backlight.c
+++ /dev/null
@@ -1,63 +0,0 @@
-
-#include <avr/io.h>
-#include "backlight.h"
-#include "atomic.h"
-
-
-#define CHANNEL OCR1C
-
-void backlight_init_ports()
-{
-
-    // Setup PB7 as output and output low.
-    DDRB |= (1<<7);
-    PORTB &= ~(1<<7);
-    
-    // Use full 16-bit resolution. 
-    ICR1 = 0xFFFF;
-
-    // I could write a wall of text here to explain... but TL;DW
-    // Go read the ATmega32u4 datasheet.
-    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-    
-    // Pin PB7 = OCR1C (Timer 1, Channel C)
-    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
-    // (i.e. start high, go low when counter matches.)
-    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
-    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-    
-    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
-    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-
-    backlight_init();
-}
-
-void backlight_set(uint8_t level)
-{
-    if ( level == 0 )
-    {
-        // Turn off PWM control on PB7, revert to output low.
-        TCCR1A &= ~(_BV(COM1C1));
-        CHANNEL = 0x0;
-        // Prevent backlight blink on lowest level
-        PORTB &= ~(_BV(PORTB7));
-    }
-    else if ( level == BACKLIGHT_LEVELS )
-    {
-        // Prevent backlight blink on lowest level
-        PORTB &= ~(_BV(PORTB7));
-        // Turn on PWM control of PB7
-        TCCR1A |= _BV(COM1C1);
-        // Set the brightness
-        CHANNEL = 0xFFFF;
-    }
-    else        
-    {
-        // Prevent backlight blink on lowest level
-        PORTB &= ~(_BV(PORTB7));
-        // Turn on PWM control of PB7
-        TCCR1A |= _BV(COM1C1);
-        // Set the brightness
-        CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
-    }
-}
\ No newline at end of file