Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

1 files changed, 51 insertions, 6 deletions

diff --git a/drivers/chibios/analog.c b/drivers/chibios/analog.c
index 2b3872afbb..b1081623d3 100644
--- a/drivers/chibios/analog.c
+++ b/drivers/chibios/analog.c
@@ -101,7 +101,11 @@
 
 // Options are 12, 10, 8, and 6 bit.
 #ifndef ADC_RESOLUTION
-#    define ADC_RESOLUTION ADC_CFGR1_RES_10BIT
+#    ifdef ADC_CFGR_RES_10BITS  // ADCv3, ADCv4
+#        define ADC_RESOLUTION ADC_CFGR_RES_10BITS
+#    else  // ADCv1, ADCv5, or the bodge for ADCv2 above
+#        define ADC_RESOLUTION ADC_CFGR1_RES_10BIT
+#    endif
 #endif
 
 static ADCConfig   adcCfg = {};
@@ -161,8 +165,8 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) {
         case B0:  return TO_MUX( ADC_CHANNEL_IN12, 2 );
         case B1:  return TO_MUX( ADC_CHANNEL_IN1,  2 );
         case B2:  return TO_MUX( ADC_CHANNEL_IN12, 1 );
-        case B12: return TO_MUX( ADC_CHANNEL_IN2,  3 );
-        case B13: return TO_MUX( ADC_CHANNEL_IN3,  3 );
+        case B12: return TO_MUX( ADC_CHANNEL_IN3,  3 );
+        case B13: return TO_MUX( ADC_CHANNEL_IN5,  2 );
         case B14: return TO_MUX( ADC_CHANNEL_IN4,  3 );
         case B15: return TO_MUX( ADC_CHANNEL_IN5,  3 );
         case C0:  return TO_MUX( ADC_CHANNEL_IN6,  0 ); // Can also be ADC2
@@ -189,11 +193,52 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) {
         case E15: return TO_MUX( ADC_CHANNEL_IN2,  3 );
         case F2:  return TO_MUX( ADC_CHANNEL_IN10, 0 ); // Can also be ADC2
         case F4:  return TO_MUX( ADC_CHANNEL_IN5,  0 );
-#elif defined(STM32F4XX) // TODO: add all pins
+#elif defined(STM32F4XX)
         case A0:  return TO_MUX( ADC_CHANNEL_IN0,  0 );
-        //case A1:  return TO_MUX( ADC_CHANNEL_IN1,  0 );
-#elif defined(STM32F1XX) // TODO: add all pins
+        case A1:  return TO_MUX( ADC_CHANNEL_IN1,  0 );
+        case A2:  return TO_MUX( ADC_CHANNEL_IN2,  0 );
+        case A3:  return TO_MUX( ADC_CHANNEL_IN3,  0 );
+        case A4:  return TO_MUX( ADC_CHANNEL_IN4,  0 );
+        case A5:  return TO_MUX( ADC_CHANNEL_IN5,  0 );
+        case A6:  return TO_MUX( ADC_CHANNEL_IN6,  0 );
+        case A7:  return TO_MUX( ADC_CHANNEL_IN7,  0 );
+        case B0:  return TO_MUX( ADC_CHANNEL_IN8,  0 );
+        case B1:  return TO_MUX( ADC_CHANNEL_IN9,  0 );
+        case C0:  return TO_MUX( ADC_CHANNEL_IN10, 0 );
+        case C1:  return TO_MUX( ADC_CHANNEL_IN11, 0 );
+        case C2:  return TO_MUX( ADC_CHANNEL_IN12, 0 );
+        case C3:  return TO_MUX( ADC_CHANNEL_IN13, 0 );
+        case C4:  return TO_MUX( ADC_CHANNEL_IN14, 0 );
+        case C5:  return TO_MUX( ADC_CHANNEL_IN15, 0 );
+#    if STM32_ADC_USE_ADC3
+        case F3:  return TO_MUX( ADC_CHANNEL_IN9,  2 );
+        case F4:  return TO_MUX( ADC_CHANNEL_IN14, 2 );
+        case F5:  return TO_MUX( ADC_CHANNEL_IN15, 2 );
+        case F6:  return TO_MUX( ADC_CHANNEL_IN4,  2 );
+        case F7:  return TO_MUX( ADC_CHANNEL_IN5,  2 );
+        case F8:  return TO_MUX( ADC_CHANNEL_IN6,  2 );
+        case F9:  return TO_MUX( ADC_CHANNEL_IN7,  2 );
+        case F10: return TO_MUX( ADC_CHANNEL_IN8,  2 );
+#    endif
+#elif defined(STM32F1XX)
         case A0:  return TO_MUX( ADC_CHANNEL_IN0,  0 );
+        case A1:  return TO_MUX( ADC_CHANNEL_IN1,  0 );
+        case A2:  return TO_MUX( ADC_CHANNEL_IN2,  0 );
+        case A3:  return TO_MUX( ADC_CHANNEL_IN3,  0 );
+        case A4:  return TO_MUX( ADC_CHANNEL_IN4,  0 );
+        case A5:  return TO_MUX( ADC_CHANNEL_IN5,  0 );
+        case A6:  return TO_MUX( ADC_CHANNEL_IN6,  0 );
+        case A7:  return TO_MUX( ADC_CHANNEL_IN7,  0 );
+        case B0:  return TO_MUX( ADC_CHANNEL_IN8,  0 );
+        case B1:  return TO_MUX( ADC_CHANNEL_IN9,  0 );
+        case C0:  return TO_MUX( ADC_CHANNEL_IN10, 0 );
+        case C1:  return TO_MUX( ADC_CHANNEL_IN11, 0 );
+        case C2:  return TO_MUX( ADC_CHANNEL_IN12, 0 );
+        case C3:  return TO_MUX( ADC_CHANNEL_IN13, 0 );
+        case C4:  return TO_MUX( ADC_CHANNEL_IN14, 0 );
+        case C5:  return TO_MUX( ADC_CHANNEL_IN15, 0 );
+        // STM32F103x[C-G] in 144-pin packages also have analog inputs on F6...F10, but they are on ADC3, and the
+        // ChibiOS ADC driver for STM32F1xx currently supports only ADC1, therefore these pins are not usable.
 #endif
     }